Hatsan 250XT TAC-BOSS Reviews

This pistol feels great in the hand good weight easy strip down for cleaning very close to the real thing love the drop down mag this is a great piece to add to any collection.

Nothing

Keep in mind it's a bb gun have fun with it don't expect to do as much damage to any target as a real firearm .

Nice weight and feel great sights and very good power. I only fired this gun once so far but it impressed me right away with steel BB's going threw one side of a soup can, nice! Metal and metal clip makes this very realistic. I was shooting at about 10 yards and got quarter size or less groups right out of the box.

A notch for the BB loader spring to hold it back while you load the BB's. I have to hold it while I load and if I let go the BB's fly out and a button for the clip release would be a great improvement . (minor stuff)

A powerful and real BB gun I am very glad I brought this one. As always Hatsan delivers.

Looks of it and the fact that the mags hold the CO2. If a seal leaks replace the mag not the gun NICE

The trigger pull is long and difficult for young shooters.

Looks dead on a Ruger .22LR pistol but does not fit the hand like one. Just a bit off. This gun is not as solid as I had hoped but that is my own expectation no fault of the gun it rattles around a bit in the hand. The barrel slides back and forth with each trigger pull much like the Colt Defender (CO2 version)

very nice ,affordable plinker. A ringer for Ruger Target pistol

It would be perfect if it had a working , short stroke bolt and single action trigger

If hatsan is not working on a blowback version they should be

the feel, the balance, the sights, the power, the accuracy, the price

tighten up the internals so there are no clacks when triggering.

the trigger was stiff, I oiled everything and now it's a lot smoother, one of my CO2 cartridges was a tight fit making magazine withdrawal tricky but worked, some small pieces of card wedged behind what would be the back bolt and frame on the real gun and a small thinner piece of rubber foam wedged between what would be the bolt and top of the ejection port on the real gun got rid of the rattling clanking noises when shooting it, now it is pleasant to shoot and seems very accurate with the Daisy Premiums, the Marksman BB's I bought just for the loader holder were OK but not that accurate, I can't find my Avanti's but am anxious to try them out in this well made fine looking realistic gun, you really get your money's worth with this one, I wish some of my other guns had this kind for quality, the only area for improvement would be to reduce the clearances of the internals that are simple, quick and easy to remove and install but I found a way to fix this and the price is great.

Okay my one word reaction here is, "Wow". I was hoping for a good gun but this one is great. I've put a few hundred BBs through it in the last couple of days. It shoots great and as I've said about 3 other BB pistols it's surprisingly accurate (at 10 to 15 feet).

Well as has already been said, I'd love a blowback version of this gun. I give it a 5 star rating. Don't know how I'd up it if they do make a bolwback version. Still if one comes out I'd try and snap it up.

The BBs are a fussy to load and the magazine is finicky to pull out (it takes both hands to remove the mag. Not a big deal, still fun to shoot.

Nice design. Nice ergonomics.

Maybe make a blowback version?

Never actually got to use it. Returned becasue every time I placed a new co2 in, it would all leak out.

Looks and feels exactly like my REAL Ruger MKIII 22/45 pistols!The fit and finish are very well done.

nothing!

Like Tom Gaylord always says,place 2 drops of Crossman's Pellgun Oil on the CO2 cartridge tip prior to installing in gun,for good seal performance,and trouble free operation.

really cool design

make it bloback

GOOD FEEL IN HAND SHOOTS GOOD

NOTHING-WOULD BE NICE IF GUN CAME WITH 2 CLIPS

NICE AIR GUN FOR THE MONEY

It is a twin for the Ruger Mark 11 pistols it even breaksdown the same way.I have four Mark 11"s and the heft and feel will allow me to practice at home and saving what little I have left of my .22 long rifle ammo.Take a look at the You Tube video on this gun.A gem"

I like it but an extra clip is almost $25.00 but I'll get one anyway.

It not only takes down like it's firearm version, even the clip release is in the same position

the detail, the weight. feels just like the powder burner it represents. i like it.

make the mag follower lock back for loading the bb's

shoots very nice. offhand accuracy is 2.5 / 3.0 inches at 15 feet. you young fellows might do better.

First impressions out of the box?, great fit finish and quality parts inside, parts are either investment castings or clean and deburred, zinc-plated steel. The faux slide is a little loose but I will shim that to eliminate the rattle, it doesn't affect anything, they made it under-size to make assembly easy in mfg. Will shoot it this weekend at 10 meters to see if it lives up to the you-tube videos that I saw.

Nothing yet... accuracy rating to follow

The rear sight IS ADJUSTABLE FOR WINDAGE, the manual and the PA description are incorrect. The sight is held in place by the dovetail, and the set screw acts to compress the sight upward into that groove. Loosening the screw allows you to drift the sight right or left in it's groove.

Everything!

Put a rail on it!

Make sure your co2 piercing hole is in good shape! The one that came with mine was defective! Im a big believer in ordering multiple magazines!

I like the fact that this is really close to the Ruger Mark III model# 10127. It shoots dead on @ 15ft. The weight and feel of this gun feels like the Ruger.

All !

Nothing, or cosmetically just the grips maybe for wooden ones.

I had the chance to buy this Ruger Mk.II from a softair shop in Spain. I think it was a preseries model. The real maker is KJWorks which is nice. This model being an airsoft modifed to .177 BBs, almost everything is more than close to the original Ruger. Clip release, field stripping, etc. Quite heavy as all the frame is metal. But, the slide can't move and also makes a little noise inside the frame. I just add a large O-ring around it = no more little noise. Trigger is a bit long but easy to master. Shoots right and kinda hard. Both a very nice look a like Ruger Mk.II + a very nice and enjoyable plinker. For now, twice a keeper too: - #1 Ruger Mk.II "air pistol" - #1 "Hatsan" CO2 pistol You won't be disappointed.

Accurate, powerfull, nice finish, full drop out magazine 60 good shots per co2,

nothing

empty completly the co2 before trying to remove it. if you leave co2 inside and you try to remove the powerlet, it will stay jammed in it because of the pressure, even with the halen screw completly removed.