Page 2 - Beeman FTS Copper, .22 Reviews

Benjamin Marauder, stock. Two things stand out. First, they have an impact that goes against the fpe numbers, they are a very solid pellet probably because of the plating. I would tend to call them penetrators, virtually no expansion on soft targets but, even though accuracy is poor past 30 yards, under 30 these are an extremely good pellet for destroying hard targets (they are labeled field target special). Second, they seem to clean the bore, as after 50 lead shots and then 10 of these the patch came out much cleaner than after 50 lead alone.

Maybe advertise these against the penetrator pellets.

Value seems poor if you take poor long range accuracy and 200 pellets into account, but I think it's good because of what I experienced. Also, they loaded significantly harder than lead. Each push of the bolt took more effort to get them chambered.

I can shoot 10 consecutive shots through a nickel sized hole at 75 feet with these bad boys using my out-of-the-box (i.e. untuned) Benjamin Marauder (22 cal).

Screw top lid.

These shoot more accurately than the Kodiak copper plated pellets (at least through my gun).

I like this pellet, clean and uniform shape

cost

these are the most accurate pellet in my RWS 34P

The weight is good at 14.72 grains, the shape is good for hunting small game and no deformed skirts. They are as accurate as can be expected, more accurate than I am.

For 10.95 they are great but I would put 300 or 400 in the tin for the price.

I recommend these pellets for hunting because of the price point,they are a good purchase. Buy them.

Size and shape were nice. The thought of no lead was nice.

Nothing.

My rifle hated these almost as much as Crow Mags. I could hear something just not quite right when my TX fired. The pellets were all over the place. These pellets were made by H&N and a real disappointment. I bought 3 tins of these and maybe I will try them in my RWS when it gets back from the tuner. These may work great in your gun.

These are great pellets. I get one hole accuracy at 25 yards in my R9. The copper wash seems to keep the bore cleaner as well as your fingers when handling them while shooting. I use them mostly for plinking and target shooting but they do just fine on the occasional vermin that wanders by.

Like any other friction fit pellet tin, a screw type would be nice.

Try them out!

Very accurate

Three the tin cover so it doesn't fall off as easy

Best grouping pellets I have found so far for my Marauder Pistol. Getting one ragged hole accuracy at 25 yards.

I wish I could buy them with a larger pellet count per tin.

These are the best grouping pellets that I have found for my Benjamin Trail NPXL 22 cal. Rifle. I have tried many other brands and types of pellets and only one came close.

None that I know of.

So far I have only found one distorted skirt out of a tin of 200.

This is the best pellet that I have shot out of my Benjamin Trail NPXL 1100.

Not a thing.

I have as not yet cronyed these pellets so I can not tell you very much about them except that they group very good in my rifle. They are very uniform with out all most no distorted skirts. I highly recommend that you try these pellets before buying any others.

Great penetration, very clean pellet.

Screw top

They shoot flat, fly fast & have good penetration. A little too light for long distances, especially on those windy days.

Well made and consistent.

Screw top lids and the availability of a 500 count tin.

These work wonders in my Beeman HW97k! SHot .348" group at 25 yards.

I like the copper idea. They seem to get a little more acceleration then other pellets the same weigh.

Heavier weight.

Did not group very well in my Benji xl 1100. Maybe in a less powerful gun they would.

I like the no lead contact between my fingers and the pellet. They seem fairly uniform in all aspects. They shoot with good velocity from my HW97k.

Do I have to say it......."Screw top lids!" Why don't the manufacturers read this stuff!?

You have to try alot of different pellets to find what your gun likes. These are very well made and they cycle great in my gun.

I've been busy, lately, with a retirement project: Trying every pellet that exists to find the most accurate. I'm done. These are them. At least, through my Remington NPSS. They out-shoot everything else I tried, including other Beemans, JSBs, H&Ns, Crossman. (I did not soil myself with Gamo.) Highly recommended.

You change 'em, I'm comin' for ya.

Don't put pellets in your mouth.

Consistent

Amount for price.

Only accurate up to about 20 to 25yds. With my Gamo Silent Stalker Whisper.

The pellets are great was touching pellet or making ragged holes at 30 yards was lighter than the pellets i shot last so they a 1 in high... Shoot through a Benjamin Trail Np with a charile da tuna trigger makes a great combination....

The price more per can screw on top

They shoot great and you should by a can if you can should could with other pellets

The pellet are clean and shinny. I finally got time to shoot groups with this pellet and was really happy With them ½” group at 30 yd. edge of hole to edge of hole with my Benjamin Marauder pistol

N/A

This is a great lighter weight pellet. Its copper coating males it clean to handle. Its very accurate too. I was putting 5 pellets in the same hole at 20 yards with my German RS2. I will be buying the heavier pellet next time.

Nothing

Very accuracy, works I mean the best!! great with my Benjamin Trail NP XL Air Rifle. With my Benjamin, I was using Crosman premier, Crosman premier domed in the box, and H&N Baracuda Match .22 Cal, 21.14 Grains, but once try these out these Beeman FTS sure is for the Fit!! NO dirty finger and accuracy, what can be better!!

make in hollowpoint ..