Page 3 - Benjamin .25 Cal, .25 Reviews

low cost heavy pellet and shoot well in both of my .25 caliber P.C.P. rifles.

maybe a little better quality control, found several misshaped & even other caliber pellets mixed right in

even though the quality for uniformity is not good , these are still a bargain.. just follow a habit of looking at your ammo before you load it and you won't have any problems. Any good air gunner should do this anyway...so makes for good practice.

they shoot very well

more of the same but different weights

not much with the one's I got.

The way they are process, because the end of the pellets are rough and not cut clean. A lot of burrs and out of round on the tin I have. Haven't shot any yet so I can't say how good they group. Expecting a lot of flyers in this tin.

Recommend if you buy these pellets check them out as soon as you get them to see what shape they are in. Maybe try another pellet from someone else who makes them in the same grain size.

Price

Nothing

It's no surprise mrod likes its own benjamine brand pellets. Middle of the road getter done piece of lead.

for the price they work great, they will group nicely

nothing

they work very well in a Benjamin air rifle

not much

most inaccurate pellet I have shot.

would not use it.

pellets seem to be well made and are consistent and are competitively price.

double check on quality control

I say the above for only one reason. The box of (.25) caliber pellets I got fit very loosely in my Hatsan Edge rifle. I even had a pellet come out as I was closing the barrel and luckily I heard it hit the table. Thereby prompting me to reopen the barrel and place another one in ,which prevented a dry fire each of the Benjamins I have shot thru the gun fit just as loose (maybe thirty or forty total) I also have used JSB 25.39gr match diablo and H&N 19.91 without any problems with fit

Everything

Price could be a bit better since you only get 200 pellets per tin.

These work great in my Benjamin Marauder .25 caliber. I have shot pellets through the same hole at 50 feet consistently. The only reason I haven't done this at 50 yards is the outdoor range has been to wet and the weather too cold, but this next week should resolve that. THese pellets came with my Marauder and it loves then. I highly recommend them.

Excellent quality pellets, which accounts for it's fantastic accuracy compared to other pellet manufacturers.

Nothing

If you want quality and accuracy, buy these pellets your Benjamin Marauder. I use these for hunting and they are dead accurate.

Price, they work well for me at less than 30 yds.

I must of gotten a bad batch. All have little "tails on the skirt and a "seam" across the head. They also had alot of scrap lead inside the skirts. Clean before use.

They was free with my order.

Need to be cleaner and better made.

These came with my Benjamin Armada in the bundle package. Plus I bought the buy 3 and get 1 free deal. So these were free. I'm just now getting back into air rifles and have watched a lot of YouTube videos on different guns and pellets. I came across one where this guy was washing his pellets and started to laugh. Not knowing I showed the video to a guy I work with. And he does the same thing. When I got my order I took them out and washed and let them sit to dry. After washing my other brands. I notice how dirty and how cheap these pellets are made. So spend the extra money and get a better quality pellet.

Super accurate out to 40 yards w/ no trajectory issues using peep sites w/ My Hatsan 135 Vortex. I can hit my 100 yrd target, but i really have to adjust about 17 clicks on my turn knob. But from 10 feet to 40 yrds i can hold as tight a groups as w/ AA & JSB. & it really hits hard. I get a little over 30fpe w/ these. Works Xcellent out of my super pellet friendly Hatsan 155 Vortex (same power plant). I have many choices w/ it. Cause it accurately shoots just about every thing i put in the chamber.

When i first tried these in my Hat 135 Vortex when it was new i wasnt impressed. So i didnt shoot many, when i ran outta AA & JSBs & PolyMags, i had these and retried them and they work great, just as good as the AAs & JSBs. Also i had my barrel replaced cause i bent it accidently letting the barrel slamm back while cocking it. The new barrel is considerably more pellet friendly. I got prolly 2000 cycles on new barrel when i tried these and there accurate out to my 75yrd target, althought trajectory comes into play at that range w/ the xtra weight, but they do group. Totally satisfied w/ them. Ive taken Turkeys, Coons, Possums & Ferrel TomKats w/ this rifle using AAs & JSBs. Im sure this pellet will perform as good/better better when i get the chance. They have always worked in my Hat 155. Ill be ordering more. I can live w/ 3 dented skirts. I usually drop that many anyhow.

Very Accurate out of my MROD. I like that they are a little heavier than the JSB's, They lay the smacketh down a little harder.

Good looking pellets. They look like they've been polished.

Change the caliber from 6.4 to 6.35 like every other pellet made.

These will NOT WORK IN A HATSAN GLADIUS!!!

The tin.

Most of the tin I received had casting materials still in the back of the pellets that should have been removed. Pyramyd Air replaced them with a different brand quickly and without a problem.

Dead on at 52 yards. Most are in the same hole with a single flier in 5 shot groups

Some dented skirts in the can

These are the pellets that came with my Marauder in a package deal. I've not tried any others

It's a very good hard-hitting pellet and contrary to what I've heard it is very accurate at 50 yards you just have to have your scope set right and I use the recticle map 4 CenterPoint scopes that are 4 x 14 x 44 it also works on the Centerpoint scope 4 by 16 by 40AO this is the scope I use and I said it on 14 power and the reticle map is exact and it will put that Benjamin domed pellet exactly where it's supposed to be and it hits hard

I can't think of anything I would change about the pellet maybe maybe put padding inside the can because occasionally I get a can that has been skirts but that is the exception rather than the rule I would change nothing about the pallet. I like the fact that they are already lubricated some people think that's dirty but for me I think it's good it seems clean my fingers are clean and it can only assist in the reduced friction in the barrel

My favorite palette has been the jsb and it is still probably one of my favorite pellets now that I have this reticle map I have become a fan of the Benjamin dome because it puts me right on target call Crosman and they Kansas send you a reticle map email

The grouping of these are very good! JSB DIABOLO's are slightly tighter out of my Gen1 Mrod. These are my go to pellets because they're cheaper and I'm killing the pest 15-35 yards. Squirrels are tough but these pellets are like 50cal on their heads. Absolutely no movement other than gravity.

Lil bit dirty but it's a small price to pay. You should be washing your hands afterwards anyway so eh! Gun never lost accuracy after shooting numerous tins over several years. Never noticed any barrel fouling or excessive deposits when I do decide to clean gun.

The difference between these and JSB's out of my Mrod is. DIABOLO's give me dime size groups at 25yds and Benji's give me nickel size. My Mrod was brought solely for pest control. It and both pellets (jsb/benji) have far exceeded my expectations. Boringly accurate!

Not the cleanest or prettiest but shoot darn good. Was actually surprised

Better can padding. Hate getting new pellets that have been rattling around.

They work. !

I've only shot 16 out of my Marauder, but I'm getting hole in hole groups already. These pellets are very good and I haven't seen a bent one yet.

Dirty...I only loaded 16 pellets in two magazines and my fingers were black...and I mean on the fingertips. I'm going to wash them and dry them with a blow dryer and hope to God they don't start rusting.

Not sure if they'll rust after blow drying, but if so, I would recommend investing in a pellet lubricant and washing the pellets and the tin they come in. Other than that, I'm loving the performance and quality of these pellets.