H&N Rabbit Magnum, .22 Reviews

well I made a mistake by buying this can of pellets, I like the shape and weight of the pellet , but I found out after the fact that I should not shoot them in my model 392 pump air rifle. they seem to shoot ok but I thought I'd go back and reread the info. on that type of pellet , I'm glade I did, It saved me from possibly wrecking my rifle, I like the pellets a lot I just can't use them in my rifle. DARN!!!

EXPLANE WHY THIS TYPE OF PELLET BAD FOR PUMP AIR GUNS.

READ THE INFO. ON THE ITEM . IT WILL SAVE YOU STRESS AND MONEY

I like the deign of these but can't say for sure how they would perform in a comparable rifle. My Octane surely doesn't have the power to propel these for any useful purpose.

Nothing, because I'm sure a good PCP rifle would fire them fine.

Find the right weight for your rifle by trying different pellets. My Octane likes 15-18 gr. pellets. However the advertised 1250 fps must have used a very light pellet. I've never chrono'd over 900 fps yet.

pellet kind of big and longer for my FX Impact, which make it impossible to load in the FX impact. It is a little big and longer for a 22 pellet.

Quality seems excellent.

Description should say "Will not fit into a non-PCP rifle."

The description states "H&N recommends that you use these pellets in PCP (precharged pneumatic) air rifles." Nothing about the fact that these will not fit into a Non-PCP rifle.

H&N pellets are good across the board. However I have several 22 cal PCP`s and a few others. I have no airgun that can shoot these accurately. The shape and weight are decent it seems but don't shoot accurately.

Not to sure but they don't shoot accurately, redesign I guess..

If you can shoot these accurately more power to you. I cannot.. JSB still is the master pellet maker.. imo

Very consistent, hit like a ton of bricks

Nothing

Sighted in my Benji-Disco at ten yards with Beeman CrowMagnums, shot an ok group (~1/2") switched to these, and they shot one ragged hole. The first bunny I shot didn't know what hit him. I'd love to get the opportunity for a coyote headshot with these little pile-drivers.

These pellets work very well in my Hatsan AT44 QE. I wasn't expecting them to be as good as the JSB 25g monster pellets but they are better in my rifle. The pellets feel very solid and dense. The extra weight comes from the density instead of increasing length and as a result, they fit in the thin Hatsan mags (with careful loading). They are accurate for the medium range hunting I was using them for (I didn't test them past 50 yards). They have excellent penetrating power although slightly less expansion than some of my lighter pellets as they are less hollow. Every squirrel I hit died instantly with large exit wounds. The pellets arrived without a single deformed one and they were all uniform in shape and size. I like them! I really like them a lot.

Not much. If I was to be picky, they don't cycle as smoothly in the Hatsan mag as my lighter pellets but they do cycle. I haven't had any jams, the side lever action just doesn't feel as easy or smooth. These pellets are at the limit of what will fit in an AT44 .22 mag so they require careful loading to avoid the skirt or tip causing a jam. These pellets are expensive like most .22 pellets but in this case, it seems like more work has gone into their manufacture, so I don't feel ripped off. With the power and accuracy, 200 pellets goes a long way for hunting but if they were available for less, I wouldn't complain and I would probably buy more to use for plinking as well as hunting.

If you are looking for a heavy .22 pellet to fit in pcp repeater, give these a try. Both these and the JSB monsters are excellent 25g pellets for the Hatsan PCP rifles. The JSB 25G pellets cycle better but the Rabbit Magnums hit harder and make a more satisfying thud sound when they hit sold objects imo. Buy both!

These pelles looks excelents!, but Not fit in Airforce Airguns!!!!

No fit in Arforce airguns!!!!!!, please check this and modify it so fit in Airforce airguns!!!

Please change diameter or modify to fit an Airforce airguns!!!!

Copper Coating, H&N Quality

Smaller diameter

Mostly my inexperience and using a new Marauder Rifle .22 Cal., rifle for the first time and some whar due to the size of these pellets.. these pellets wouldn't seat well into the barrel. I was unable to lock the bolt and not wanting to force it I shot it that way and blew out the O-ring.. I said all that to say that this is my exp[erience and my rife, not totally the fault of the pellet so you may have a much better exerience with them. After all they are H&N so they can't be that bad grins!

These rounds fit and cycle perfectly in my .22 Hatsan PcP's(AT-44.22 P.A./ AT-44"tact"10-22), also in my "performence" tuned Cometa Fusion Premier(.22/30ft/lbs), with exceptional accuracy, actually the further the distance the better, In my Hatsan's, expect sub 3" groupings at distances up to and over 100 meters, I can't wait for Rabbit season this fall, I know to expect great things w/ this round, and my PcP's. Cheer's, Andy.

Nothing!

These rounds, unlike the lead counter-part comes minus the little "tit" on top, so no need to file down anything so it'll cycle w/out any problems.

Everything

Would be nice to see this same pellet in a more break barrel freindly wight and size

Great looking pellet prefect for pcp guns not a good fit for my rws 34p or nitro venom