Air Venturi IZH Drozd Bulk-Fill Reviews

I can be hooded up to my onboard air on my ZUK 4x4 hooks on to hose that airs the tires with 7cfm you have to like that. never change air bottles and add as much hose as you need it

would not change anything

It is a must for any 4 wheeler with onboard air

This is a must have for drozd owners. Way better than using 12 gram Co2 every 2 clips.

Wish the hose was longer

Use this with crosman pellgun oil, helps prevent problems

everything was great except the hose and push connectors ,leaked bad replaced hose and connectors to a coily hose paintball set up,works great now on all my pistols as well,

hose and connectors

can adapt a lot of airguns,pistols as well as rifles,just leave grip cover off or trim to use

This is a must have for any gun that can use it, saves time on loading cartridges. This thing gives you more fun and saves money a win win for you.

I would like the hose to be longer so I could hook this to a scuba tank!! or hook it to tanks on a belt used for paint ball air tanks.

You are wasting time and money if you don't buy this.I don't want to be overbearing but unless you simply don't have the money you really need to get this you will only be cheating yourself if you dont.

Gets the job done

should Be better grade of product 4the price cheap cold stamp form compression fitting low grade poly plastic pressure line

some have said female end where the bottle goes in leaks that is because quality control forgot to check 2 see if there was a gasket !!!! easy fix just put in a black natural rubber Shower head gasket and U R ready to go

Way better than cartridges.

Use braided metal lines and highest quality fittings available.

First one leaked right away. Second held up for a while, but leaked at threads, extra teflon tape fixed that. Now, it's leaking in the fitting,, I can't fix that. For this much $$ you'd hope they pressure test these things first. If it leaks, it's useless.

easy to install

quailty of plastic hose

assembly quality below average for the unit I purchased, one of the fittings leaked immediately new out of the box.

Very high quality. Works perfectly. Immediate increase in velocity and accuracy. Using with a 9oz CO2 tank makes the gun not too heavy, and is the perfect butt stock length. Great product.

I would possibly change the angle between the gun and the bottle (angle the butt stock adapter about 5-10 degrees down), and shorten the hose (although it may be this length to trap liquid CO2 under heavy shooting in the bottom loop?)

Pyramyd Air is the only place to get this item. Bravo for supplying it. Shipped on time. A must-have for any Drozd owner. Adding 8 2/3AA 3.6v lithium batteries instead of the 6AA batteries will further enhance this upgrade. If you can speak Russian (like me) go to www.airgunmod.com to learn more about the Drozd and how to further enhance it. This is by far the best bulk CO2 adapter for the Drozd available on the market today.

the ability to connect a larger co2 source ,saves changing powerlets every 2 mags

the ngle at which the bottle attaches to the gun ,needs to more angled otherwise liquid co2 floods the gun ande would require a syphon to be fitted to the bottle

very promp delivery to the uk five days in total

ease of putting on gun, well built

this is much better than changing tanks every 3ed reload, 24 oz tank last me for quite some time, glad i went this route.

Well built and strong.

Drop the angle of fit where the air bottle attaches to the metal stock fitting. That would allow the shooter a better line of sight for aiming. The straight line of the current design does not allow for a good sight picture. Also, the air hose is a bit rigid and should be replaced with flexible coil type.

With this device and a 20oz. CO2 bottle you can shoot all day. I get mine charged at our local Acedemy sporting goods store for less than $4.00. Bulk air is the way to go.