Refurb SALE: 20% off Select Refurbished Items SHOP NOW *
*Offer expires 04/30/24 at 3 a.m. ET. Some exclusions apply.
0
*Offer expires 04/30/24 at 3 a.m. ET. Some exclusions apply.
4.5 (45 reviews)In-stock
Create an online review and share your thoughts with other customers
5.0 5.0
5.0 5.0
By Anthony from USA on 2016-02-08 19:13:34
They are perfect for my purpose.
Things I would have changed:Not a thing
What others should know:I really like Leapers/UTG products. You will too if you try them.
1.0 1.0
1.0 1.0
By Anonymous from USA on 2012-01-09 19:44:00
at least they look nice
Things I would have changed:The see-thru feature is useless, you can only see the sights if you left the scope off the rings, the front objective block the viewing tunnel so it defeats the purpose of having see-thru rings.
What others should know:These rings are cheaply made and not the best quality as the first set of rings damaged my scope's finish. They were machined out of round so that when I torqued the screws to the factory recommended 15in/lb with my torque wrench, they gouged off the finish on the right side of the scope (on both the front and back ring locations). I sent these back and asked PA for a refund but they sent me another set instead, so you can imagine how upset I am that not only will I have lost $8.50 to send back the damaged scope and rings, I'll have to risk damaging the new replacement scope again with these crappy rings. The replacement rings are almost as bad as the first ones, I didn't torque them to the recommended 15in/lb because I didn't want to risk distorting the rings and damaging the finish again. So I torqued it to 10in/lb and the damn scope keeps creeping back in the rings and it's rotating due to the sever recoil and twisting of my Ruger Air Magnum. I tried to torque the horizontal Weaver rail screws to the recommended 35in/lb and it bent the crap out of the screw on one of the rings, but the other ring screw is fine at that torque, so one screw was definitely not properly heat treated. Mind you, I didn't use a ft/lb wrench divided by 12, I used a dedicated in/lb wrench so the torque I set was very exact. These rings are absolutely useless and I definitely would not use the recommended factory torque settings as you'll probably damage your scope or the rings. Better yet, just spend a bit more and buy better quality rings instead. I wish PA would have refunded my money (and covered the return shipping) so I could have bought better mount instead, now I'm stuck with these useless pieces of junk as I'm not going to spend more money sending these back again. These rings are not worth the money I paid, and I wish I could have given these a ZERO stars if it was possible.
| Sort by: | Date
| Helpfulness
| Rating
|
|---|
| Filer by: |
|---|
5.0 5.0
5.0 5.0
Verified Purchase
The Leapers UTG high 1" scope mounts are precision and quality. The price is fair.
Things I would have changed:As part of lightening my air rifle, I turned the 2 heavy duty mounting nuts past the tightened end thread ends and replaced them with lighter weight standard nuts.
What others should know:I recommend the UTG scope mounts to all who are in need of "rings". There are no faults in them.
0.00 ratings5.0 5.0
5.0 5.0
Verified Purchase
High quality. Perfect fit. Easy to install.
Things I would have changed:Nothing
0.00 ratings
4.0 4.0
4.0 4.0
Verified Purchase
paded rings to prevent damage to scope easy installation
Things I would have changed:nothing
What others should know:nice rings for price
0.00 ratings5.0 5.0
5.0 5.0
Verified Purchase
Just the right height to allow larger than 10 round magazines to be used in the air gun. Great situation in a target-rich environment.
Things I would have changed:The rings were designed for Weaver attachment when the air gun has a dovetail setup. Needed the new spring-loaded adapter for the new rings which allows multiple attachments for one scope. Of course, the scope must be sighted-in after each move.
What others should know:Quality products and fast shipping from this industry leading company.
0.00 ratings5.0 5.0
5.0 5.0
Is as expected
Things I would have changed:None
What others should know:None
0.00 ratings5.0 5.0
5.0 5.0
Good solid design
Things I would have changed:Add picatinny on top of scope rings.
5.01 rating5.0 5.0
5.0 5.0
Well packaged. Quality components. Strong fasteners. Installation tools included. Excellent price.
Things I would have changed:Nothing.
What others should know:Nearly all of my guns have UTG rings. They are all excellent, and these are no exception. I see no reason to purchase expensive rings, when these do such a great job at a fraction of the cost. I have these mounted to my Benjamin Kratos. I might have been able to use medium height rings, but I am glad I opted for the highs instead. The magazine on the Kratos is pretty tall.
5.01 rating5.0 5.0
5.0 5.0
Fit right, good and solid. scope feels secure and it was easy to sight in.
Things I would have changed:Nothing.
What others should know:I like them on my Air Venturi avenger .25. Give them a try and see if they are a good fit for your set up. If it is, you will be a happy camper as am I.
4.01 rating5.0 5.0
5.0 5.0
everything fit the gun and scope great
Things I would have changed:nothing
What others should know:works great when optics is larger then standard mounts are high enough
5.01 rating5.0 5.0
5.0 5.0
Well made for the price in my opinion. Hold my scopes solid on my PCP and break barrel air rifles.
Things I would have changed:Nothing
What others should know:Worked so good, I have ordered these a few different times.
5.01 rating5.0 5.0
5.0 5.0
well made sturdy
4.01 rating5.0 5.0
5.0 5.0
everything they work great, solid fit and finish , easy installation , solid lockup wish more were like them
Things I would have changed:nothing
What others should know:buy extras , you will like them , better than most
4.01 rating5.0 5.0
5.0 5.0
Easily mounted. Accepts the scope no tolerance issues
Things I would have changed:None
What others should know:Nothing
4.01 rating5.0 5.0
5.0 5.0
Perfect hight and good quality
Things I would have changed:Nothing
What others should know:Don,t know how many of these I have purchased over the years but I love them.
5.01 rating5.0 5.0
5.0 5.0
Good quality, easy to install, performs just as expected. Excellent value for the money.
Things I would have changed:nothing
What others should know:PA simply excellent, efficient, and prompt : what else could you want.
5.01 rating5.0 5.0
5.0 5.0
Verified Purchase
The scope that came as a packaged deal with my Hatsan Speedfire utilized rings that did not hold the scope in place. After speaking with customer service, I was advised to use these. Sliding of the scope has now been eliminated. I recomend theses rings to anyone with a Speedfire supplied scope.
Things I would have changed:Nothing
What others should know:Don't hesitate to purchase these.
5.01 rating5.0 5.0
5.0 5.0
Seem very secure
Things I would have changed:Nothing
5.01 rating5.0 5.0
5.0 5.0
good price
Things I would have changed:need to be a little higher for a 50mm objective lens
What others should know:risers are available
4.01 rating5.0 5.0
5.0 5.0
They worked just fine
4.01 ratingBuy With Confidence
Get FREE shipping on qualifying orders! Any order $150+ with a shipping address in the contiguous US will receive the option for free ground shipping on items sold & shipped by Pyramyd AIR during checkout. Certain restrictions apply.
Free shipping may not be combined with a coupon unless stated otherwise.
View Shipping Info
We work hard to get all orders placed by 12 pm EST out the door within 24 hours on weekdays
because we know how excited you are to receive your order.
Weekends and holiday shipping times will vary.
During busy holidays, we step our efforts to ship all orders as fast as possible,
but you may experience an additional 1-2 day delay before your order ships.
This may also happen if you change your order during processing.
View Shipping Times
It's important to know that due to state and local laws, there are certain restrictions for various products.
It's up to you to research and comply with the laws in your state, county, and city.
If you live in a state or city where air guns are treated as firearms you may be able to take advantage of our FFL special program.
U.S. federal law requires that all airsoft guns are sold with a 1/4-inch blaze orange muzzle
or an orange flash hider to avoid the guns being mistaken for firearms.
View Shipping Restrictions
Get the most out of your equipment when you work with the expert technicians at Pyramyd AIR. With over 25 years of combined experience, we offer a range of comprehensive in-house services tailored to kickstart your next adventure.
If you're picking up a new air gun, our team can test and tune the equipment before it leaves the warehouse. We can even set up an optic or other equipment so you can get out shooting without the hassle. For bowhunters, our certified master bow technicians provide services such as assembly, optics zeroing, and full equipment setup, which can maximize the potential of your purchase.
By leveraging our expertise and precision, we ensure that your equipment is finely tuned to meet your specific needs and get you ready for your outdoor pursuits. So look out for our services when shopping for something new, and let our experts help you get the most from your outdoor adventures.
View Service Info
Shop and purchase with confidence knowing that all of our air guns (except airsoft) are protected
by a minimum 1-year manufacturer's warranty from the date of purchase unless otherwise noted on the product page.
A warranty is provided by each manufacturer to ensure that your product is free of defect in both materials and workmanship.
View Warranty Details
Didn't get what you wanted or have a problem? We understand that sometimes things aren't right and our team is serious about resolving these issues quickly. We can often help you fix small to medium issues over the phone or email.
If you need to return an item please read our return policy.
Learn About Returns
Get FREE shipping on qualifying orders! Any order $150+ with a shipping address in the contiguous US will receive the option for free ground shipping on items sold & shipped by Pyramyd AIR during checkout. Certain restrictions apply.
Free shipping may not be combined with a coupon unless stated otherwise.
View Shipping Info
Want More?
Join Our Email List for News and Deals!
Join the Pyramyd AIR mailing list: Our e-mails are filled with new products, deals, sneak peeks, tips and tricks, contests and more - sign up today!
Text JOIN to 91256 and get $10 OFF Your Next $50+ Order!
* By providing your number above, you agree to receive recurring autodialed marketing text msgs (e.g. cart reminders) to the mobile number used at opt-in from Pyramyd AIR on 91256. Reply with birthday MM/DD/YYYY to verify legal age of 18+ in order to receive texts. Consent is not a condition of purchase. Msg frequency may vary. Msg & data rates may apply. Reply HELP for help and STOP to cancel. See Terms and Conditions & Privacy Policy.
Customer Support
Customer Support
Copyright © 1999-2024 Pyramyd AIR. All Rights Reserved.
By Francis
Verified Purchase
They provided enough clearance for a 3-9x40 scope on a Hatsan Model 125. Most likely they will provide enough clearance for a scope with a 40mm primary on other air rifles. I had no problems with them during installation. The rings seated the scope firmly.
Things I would have changed:Not much really.
What others should know:The see thru feature for using your open sights may, or may not work. Depending on your front and rear sight height. I can't see the sights in my case.