Roll over image to zoom in
1-year limited warranty
List Price $36.00 Save $6.05 (16%)
Earn 30 Bullseye Bucks
Includes piston bumper and breech seal. Meets or exceeds quality and requirements of the original seals.For professional installation only
other products by Air Venturi
Create an online review and share your thoughts with other customers
Things I liked: You get the special wrench you need to take the valve out of the gun. You get all of the seals you need.
Things I would have changed: A little more detailed set of instructions on handling procedures to reassemble it.
What others should know: The white Teflon check valve disk has a radius on one corner. No mention in the instructions as to which way the radius should go in. (facing front or back)
Things I liked: I like the idea that these parts are available.....
Things I would have changed: There are 3 parts that make up the sealing system in a 300 ( breech, bumper and piston ring...for $30 bucks and $8 bucks shipping ....wouldn't ya think they'd throw in a piston ring?....no-o-o-o...you gotta go hunt it down else where ....and pay through the nose for the part and the shipping bend over yet again....SELL ALL 3 PARTS TOGETHER...and ease up on the shipping for small parts.
What others should know: This is the Pyramid way...
Things I liked: I recently rebuilt three FWB 300's, one in pieces. The seals had deteriorated completely. These were easy to install, and I had them in in very short order. The quality of the seals was high and they functioned perfectly.
Things I would have changed: nothing
What others should know: If you don't feel very comfortable with a fairly complicated build, and don't have a spring compressor,don't attempt to install the piston seal yourself. Have a competent airgun gunsmith perform the service.