1-year limited warranty
List Price $30.00 Save $1.50 (5%)
Want it delivered 12-10-2013
Order it in the next 5 hr and 46 min, and choose Next Day Air Morning at checkout. Details
Things I liked:Professional, cleanly-cut C&C work makes up these ultra defined adapter/spacers from BKL, and there is no other manufacturer of mount apparatus that is quite as good at this science as BKL...I like ALL their products, and didn't hesitate to use them to normal optical, and laser/red/green/blue dot (RGB)scopes in 3 (three) of my air guns. My .22"-Cal Marauder pistol mounts a BSA Huntsman 30mm RGB (red, green & blue) Dot Scope with the BKL's; also use a BSA Holographic Reflex red dot 4-reticle scope mounted with the same BKL's albeit spaced completely differently, and add to that a conventional Simmons ProHunter 2x X 6x X 32mm pistol scope to the mix too--all nicely mounted up with the BKL 1" adapter, covering any and all scope needs of that great-shooting Marauder pistol. The adapter tends to place the scope's (any scope's) eye relief in a great position to allow "two-eyed" shooting with the electronic scopes engaged, also. The Simmons optical scope was the most difficult to match up because of the clearance issue with the Marauder's 8-shot magazine, but eventually I got it right, works fantastic! If you have to convert a 3/8" to a 5/8" Weaver rail there is no better item to do such things with than the BKL all-alloy beautifully finished adapter. The 1-inch lift that the BKL adpater has also raises scopes just enough off the barrel to allow for proper alignment and centering of all my scopes. Highly recommended!!
Things I would have changed:As others have hinted, there are times when you wish the adapter was .10" to .30" longer, to help with a larger scope Weaver rail, but in the end I have yet to try to utilize the BKLs and fail in my efforts...this little gem is multi-dimensional and able to be used with a large variety of scopes and types. I like the devices so much that I keep a spare set in my "ready-to-go" utility bag, just in case I need a set for mounting something new when traveling, for out of town shoots with friends, for instance. The BKL's look so nice, and play so nice with all my air guns that need adapters, to the point of me recommending them to anyone who asks my advice re this type of equipment for scope mounting.
What others should know:The rail grip of the BKL adapter is achieved after some strong torquing of the mounting hex-screws, so it's wise to give the mount several good "tugs" or "pushes" after you think you're done. Often you have to go back and tighten the clamps further than you would have needed, normally, when you attempt to check the clamp's grip on the rail. It's normal, and BKLs will take a ton of force without stripping or damaging the adapter, so don't be shy in this regard!
Things I liked:I am using these with a new Benjamin Disco. They give you the advandage of using Weaver Scope mounts instead of Dove Tail Mounts. They give you just enough added height to make loading the Disco a lot easier.
Things I would have changed:The only thing I would change is to make them about 1/2 inch longer and add and other Weaver Cut to give you more mounting options for your scope..
Things I liked:These fit really nice and are low enought when adding the scope rings they are not to high
Things I would have changed:Would of like to have seen a stop / Arrester pin on the mount