Roll over image to zoom in
1-year limited warranty
List Price $44.95 Save $2.00 (4%)
Only 2 left in stock
Earn 43 Bullseye Bucks
Create an online review and share your thoughts with other customers
Things I liked: Everything. Used on Hatsan AT 44-10 Long QE Slides on dovetail. Very snug. Tap on with a wood hammer handle. Snug up the screws. The adapter fits so good it would probably stay in place without the screws. It installs easily even though it fits tight.
Things I would have changed: Nothing
What others should know: Doesn't interfere with changing the rotary magazine on the Hatsan
Things I liked: This is used on a Kimber 82G .22LR single shot rifle. I have no issue inserting or ejecting a round, it sits high enough for the round to go in. That was my biggest concern. When installed on the rifle, I can literally pick up a 13 pound rifle and scope combination just with two fingers between the bottom of the scope rail and the receiver, this is solid.
Things I would have changed: I have an 11mm dovetail on the rifle, and I really had to torque on the screws to get it tight enough to fit. I thought I was going to break it before it engaged the dovetail. I am concerned that over time this will become an issue, since I plan on switching between iron sights and the scope on a regular basis, and torquing and untorquing the unit may cause it to fail.
What others should know: Since I am not an airgunner, I can not speak to them, but those individuals who are looking for a dovetail to Weaver adapter for a firearm should take this into consideration, especially if you are using a large aperture objective on your scope. I have a 44mm objective, 30mm tube and am using Burris Signature Zee rings, and it's plenty high for me.
Should I use this mount and weaver rings for a full size scope on my bolt action 22lr or go simply with dovetail rings ?
That's a personal choice.
Can I use this adapter in the marauder- will the magazine fit-Thanks
So is that a yes or no. For the marauder pistol .22
Yes, it will clear the magazine. A friend has this BKL on his 0.25 Marauder. There isn't a lot of room between the bottom of the BKL and the clip, but it definitely does not touch. He uses it to mount a Pulsar night scope to his Marauder.
No, it won't work on the Marauder