Date: 30/11/2015 12:51

Crosman 459MT 2-Pc Intermount, 3/8" Dovetail


1-year limited warranty

Buy and Earn 31 Bullseye Bucks!


List Price $15.62 Save $5.17 (33%)

Add to Cart


Pyramyd Air 30 day money back

Estimate Shipping

Want it delivered 12-02-2015?
Order it in the next 23 hr and 7 min and choose Next Day Air Morning at checkout. Details

Add to Compare
Add to Wish list
  • Description
  • Customer reviews
  • Q & A: 1 answered question
  • Attaches to the barrel & provides a 3/8" dovetail
  • Fits Crosman models 2240, 2250, 2260, 2289, 1322, 1377, 1740 & 1760
  • Includes 1 set, which is 2 intermounts

In stock

Item Code: CR-459MTC [PY-A-190]

other products by Crosman

2.0 2.0

2.0 2.0

By Dennis from USA on 2015-11-02
See all my reviews
Was this review helpful?
0.00 ratings

Verified Purchase

Things I liked: Easy to use

Things I would have changed: should be wider so could use 2 screws

What others should know: The very nature of scope mounts pinch the top of this system and opens the brackets to lose purchase. I made mine work believe it or not using superglue and glued to to the top of the barrel on and old Crosman 180. Very little recoil and seems to work but not ideal.

2.0 2.0

3.0 3.0

By Dennis from USA on 2015-10-17
See all my reviews
Was this review helpful?
0.00 ratings

Verified Purchase

Things I liked: they are self explanatory as far as their use.

Things I would have changed: I think they should be wider with 2 screws and put more pressure on clamping to the barrel. I also think that the milling of said should be more circular not oval.

What others should know: Ok I got these to mount a scope on and old Crossman 180. I read all the reviews and all the different systems that others shooters employed to get these to work, I also tried some of their suggestions. None work because when you tighten up the scope bases on this mount the very nature of you tightening the screws on the scope mounts opens these mounts. Well I got them to work and I do not know if anyone else is this desperate but I applied CA Glue (super glue ) to the inside of these mounts before I attached them where I wanted to mount the scope. I also let some drip into the gap at the top to allow it to go down between the intermount and the barrel. You may think I am nuts but it worked, Just shot my third squirrel with it. ) Desperate men will do desperate things. The scope seems to be nice and tight. This rifle has very little recoil so should hold up well.

3.0 3.0

3.0 3.0

By Anthony from USA on 2015-08-19
See all my reviews
Was this review helpful?
0.00 ratings

Verified Purchase

Things I liked: Worth the money. I needed a mount for my 2240 and these did the trick eventually. See below...

Things I would have changed: They need to be about 1/16th longer on both sides so when the bolt is tightened the mount can't rock. It's a tiny bit of movement, but it's enough to throw the mounted scope off. Also, two bolts would make the flat on top be perfect. As they are, you have to mate them at the top with your fingers as you slowly tighten the bolt.

What others should know: I used some double-sided tape, a small piece on each half, as I clamped the mounts on the barrel. I had determined where the scope was going, and spaced the mounts accordingly. I also shimmed all four edges with small slivers of 1/16" plywood painted black. Have to say, it works great now. I also have to say none of this should have been necessary if it was properly engineered.

Show Other ReviewsCreate an online review and share your thoughts with other customers
  • Dennis from USA asked:

    will these mounts allow me to install a Leapers UTG 4X 32 AO Rifle Scope that comes with 3/8 mounts on my Crossman 180 ?

    • Ed from USA asked:

      I have a Benjamin Regal NP And I just bought a new scope. The problem I have is the rails are about 7/8" apart and my air gun is about 5/8". The new scope has a 56mm end and the new mount are too wide and the old mounts are too short. My question is will these mounts work together to give me the hight I need or is there something else I should try?

      • Jerry from USA:

        No, you will need a high set of Weaver rings