Shopping Cart Items

    CheckoutSubtotal:
    does not include shipping and tax

    Buy and Earn 25 Bullseye Bucks!
      What are Bullseye Bucks - Pyramyd Air

    Hawke Sport Optics 2-Pc Adapter, 3/8" to Weaver Rail

     
    Hawke Sport Optics 2-Pc Adapter, 3/8" to Weaver Rail

    Click for larger image and other views

    Lifetime limited warranty

    SKU PY-A-4162

    $24.99

    List Price $27.99 Save $3.00 (10%)

    Add to Cart
    Pyramyd Air 30 day money back
    Estimate Shipping
    Zip Code:
    Country:

    Want it delivered 12-30-2014?
    Order it in the next 13 hr and 2 min and choose Next Day Air Morning at checkout. Details

    Add to Compare
    Add to Wishlist
    • Description
    • Customer reviews
    • Questions & Answers
    • Hawke Sport Optics 2-pc adapter
    • 3/8" to Weaver rail*
    • Includes 2 rails and a hex wrench
    • Black

    *3/8" is approximately 9.5mm, but this adapter has enough room in it to accommodate up to 11mm.

    If you need to convert your air gun's 3/8" or 11mm dovetail to a Weaver, this 2-piece set will do it and offer a firm, secure foundation for your optics.


    In stock

    Item Code: Hawke-HM17025 [PY-A-4162]

    other products by Hawke Sport Optics

    Create an online reviewand share your thoughts with other customers

    Overall rating:1.0 1.0

    Value for money:1.0 1.0

      By DougFLA123 from USA on 2014-12-19
    See all my reviews
     Was this review helpful?
    0.00 ratings
     
    Things I liked:They seem sturdy.
    Things I would have changed:Make them flex a little so you can slip them over a dovetail rail, and then tighten them up.
    What others should know:I bought them for my Beeman P3. You can't slide them onto its rail because there's no entry point for that, and you can't snap them into place over the P3 rail. They don't fit on my TX200 dovetail rail either. I don't know if they can be pried, so that they can be made useful.

    Overall rating:5.0 5.0

    Value for money:5.0 5.0

      By mtlemmonrunner from USA on 2014-09-25
    See all my reviews
     Was this review helpful?
    0.00 ratings
     
    Things I liked:The two parts need to be spaced apart appropriately such, that is to fit your mounted weaver device! Meaning the groove in the middle of each adapter needs to sometimes fit the thing your mounting.
    Things I would have changed:Not a thing its very low/flat by default! In my use, it will not budge cause my air gun has zero kick e.g. multi-pump 2289.
    What others should know:I'm using this on Crosman steel breech on a 2289. E.g. Now I'm a weaver regular that's true. I have since then put a blue illuminated mil-dot scope, a red/green dot from here on that a flashlight/green laser combo on the side, and pressure green laser on the side.

    Overall rating:4.0 4.0

    Value for money:5.0 5.0

      By James from USA on 2014-08-01
    See all my reviews
     Was this review helpful?
    0.00 ratings
     
    Things I liked:Fit a RWS 34, 36 and my 350 MAG as they should, with the 11mm rail. These work quit well on 22cal. rifles with a 11mm dove tail. Probably works great on any gun with the 11mm dovetail.
    Things I would have changed:Nothing. In the description I would make type bold and "quoted" stating not recommended for guns with a lot of barrel droop.
    What others should know:These were ordered for my 350 MAG. But the amount of barrel droop would not let me compensate for that. So Do not buy these if your barrel has a lot of droop. Buy the barrel droop compensator mount for an 11mm dove tail to the Weaver mount. Works GREAT had scope sited in in just a couple dozen shots shots. With any scope mount BE SURE to use (Blue Loctite) on all cap screws when mounting scope.
    Show Other ReviewsCreate an online review and share your thoughts with other customers
    • Stick from USA asked:

      Would this split rail adapter work on a Benjamin Maurauder (and still have rotary magazine functionality)? Also, would Picatinny scopes adapt to this Weaver? Would this mount and Yukon NVRS Tactical 2.5x50 Night Vision Rifle Scope, Weaver Mount work on the Ben.Maur.?

      • Steve from USA asked:

        Will this fit the Crosman steel breech for the 1377 and c77 pistols?

        • Jerry from USA:

          Yes it will fit the steel breech kit

      • Gary from USA asked:

        What are the individual lenghts?

        • Jerry from USA:

          Each piece is a little over 1"

      See all discussions »

      Shop at Gun Mall
      Back to Top