Call 888-262-4867 toll-free and we'll answer your questions. Hassle-free online buying. Order by noon Eastern & we ship the same day (weekends & holidays excluded). Some orders excluded.
So, are you looking for a fresh take on airguns?
Some new information, perhaps?
Check out our daily report!
Monday thru Friday find new topics about air guns, BB guns and airsoft guns. Ask your questions by clicking on the comments link at the bottom of each post.
$25 eBillme Rebate! Receive $25 by mail on orders of $100 and over when you checkout with eBillme. Valid for first use of eBillme only. Offer valid from October 9, 2009, to January 5, 2010.
Download the rebate form here.
Same day shipping exempt
This item doesn't qualify for Same Day Shipping Exclusions include but are not limited to international shipments, haz-mat products, special order items, orders with out-of-stock items, orders needing customer verification for processing, orders for technical inspection or product installation.
By D Michael from USA on 2009-10-09 14:37:23 - See all my reviewsAdd comment to this review
Things I liked:I does as they say it will. Easy to install. Plain instructions, well made, and it looks nice. Things I would have changed:Nothing What others should know: I did have a screw back out on me after a few hundred shots. A person might consider using some blue thread locker on the main screws. I was 1 inch up
... Read MoreThings I liked:I does as they say it will. Easy to install. Plain instructions, well made, and it looks nice. Things I would have changed:Nothing What others should know: I did have a screw back out on me after a few hundred shots. A person might consider using some blue thread locker on the main screws. I was 1 inch up and 1 right @ 25 yards on first shot.
By macavada from USA on 2009-08-29 16:37:25 - See all my reviewsAdd comment to this review
Things I liked:Easy to mount. Seems very solid. Compensated for barrel droop on my Bam XS-B28A (RWS 350 copy). Fit very well. Mounted Nikko Stirling 3x10-42 with low rings without a problem. Scope sits a little high. Some lower rings might be better if I get around to it. Right now using Leapers rings. Things I would have changed:Make
... Read MoreThings I liked:Easy to mount. Seems very solid. Compensated for barrel droop on my Bam XS-B28A (RWS 350 copy). Fit very well. Mounted Nikko Stirling 3x10-42 with low rings without a problem. Scope sits a little high. Some lower rings might be better if I get around to it. Right now using Leapers rings. Things I would have changed:Make the mount a little lower. What others should know:
By Thomas from USA on 2009-08-24 23:43:57 - See all my reviewsAdd comment to this review
Things I liked:My 34P didn't have the droop like most so my compensator caused it to shoot high. PA sent me out the non-compensating rail for free and now my 34P shoots perfect. Things I would have changed: What others should know:
By sam from USA on 2009-08-12 19:52:05 - See all my reviewsAdd comment to this review
Things I liked:its great it does what its suposed to do and it keeps the scope whre it should be. i like the weaver stly mounting because it just helps to keep the scope from shifting Things I would have changed:nothing What others should know:its great
By David from USA on 2009-06-07 23:41:47 - See all my reviewsAdd comment to this review
Things I liked:Very well made! Things I would have changed:I do not like the over-all over compensation of having to shim front ring on my rws 350mag to get enough scope adjustment. If you are gonna order one get this UTG MOUNT #LEMINT-DNTOWLPY-A-2639 . It should work fine with LEAPERS RINGS-1"Weaver Rings-LOW. What others
... Read MoreThings I liked:Very well made! Things I would have changed:I do not like the over-all over compensation of having to shim front ring on my rws 350mag to get enough scope adjustment. If you are gonna order one get this UTG MOUNT #LEMINT-DNTOWLPY-A-2639 . It should work fine with LEAPERS RINGS-1"Weaver Rings-LOW. What others should know:
By Customer from USA on 2009-05-28 22:53:10 - See all my reviewsAdd comment to this review
Things I liked:I was using RWS droop comepnsating scope rings with a stock RWS 4x32 scope and not having any movement and holding true. When I upgraded the scope to a heavier one, I wanted to make sure it didn't move!
The weaver rings are much larger and lock in place more securely. Because my scope has short eye relief, I may hang it off
... Read MoreThings I liked:I was using RWS droop comepnsating scope rings with a stock RWS 4x32 scope and not having any movement and holding true. When I upgraded the scope to a heavier one, I wanted to make sure it didn't move!
The weaver rings are much larger and lock in place more securely. Because my scope has short eye relief, I may hang it off the back of the scope rail and the weaver scope rings should be able to hold it without problems.
I can use my open sights by looking underneath the weaver rings and thru the mount!
Things I would have changed:To much compensation! At 20 meters I ran out of elevation compensation and shoot 1/2" to high. What others should know:Even with the over compensation, I'm keeping it because the weaver rings are much better in my opinion and I can still use the open sights for close in targets.
By Patrick from USA on 2009-05-13 15:02:49 - See all my reviewsAdd comment to this review
Things I liked:Good,solid construction. Scope shift should not be a problem with this
mount. Things I would have changed:Nothing What others should know:I bought one for both my RWS model 48 and magnum 350. The one for my
model 48 is fine. The mount for my mag.350 is another story. Trying to zero
in the scope{ Leapers
... Read MoreThings I liked:Good,solid construction. Scope shift should not be a problem with this
mount. Things I would have changed:Nothing What others should know:I bought one for both my RWS model 48 and magnum 350. The one for my
model 48 is fine. The mount for my mag.350 is another story. Trying to zero
in the scope{ Leapers 4x32} at 35yds it still shoots several inches high of
the mark with the elevation turned all the way down.
By Bryan from USA on 2009-02-24 10:14:49 - See all my reviewsAdd comment to this review
Things I liked:works great! Works as advertised, NO scope slip on my rws 34. Things I would have changed:nothing What others should know:I'm getting another one of these for my rws 350 mag .22. I have complete confidence in it's solidness and quality.
By Troach from USA on 2009-02-15 14:33:48 - See all my reviewsAdd comment to this review
Things I liked:It works. It's simple and strong. Things I would have changed:Nothing so far. What others should know:I bought this part when it first hit the market but didn't install it until pretty recently. Then I discovered I needed Weaver rings and didn't get those until still more recently. Happily I got one of the
... Read MoreThings I liked:It works. It's simple and strong. Things I would have changed:Nothing so far. What others should know:I bought this part when it first hit the market but didn't install it until pretty recently. Then I discovered I needed Weaver rings and didn't get those until still more recently. Happily I got one of the ring sets recommended here. When I got everything squared away, it was clear that the part had cured the droop problem. After a few rounds of sighting in, I'm sure that I'm the basement range, ironing board rest, 10 meter champion on my street :)
By Customer from USA on 2009-01-06 16:52:18 - See all my reviewsAdd comment to this review
Things I liked:The ability to install rings in different locations on the rail Things I would have changed:The lower molding is cumbersome if you are using this on something other than the recommended model. It may cause the scope to be elevated or lower on the mounted weapon depending on the installation What others should
... Read MoreThings I liked:The ability to install rings in different locations on the rail Things I would have changed:The lower molding is cumbersome if you are using this on something other than the recommended model. It may cause the scope to be elevated or lower on the mounted weapon depending on the installation What others should know:
By Owen from USA on 2009-01-02 11:42:32 - See all my reviewsAdd comment to this review
Things I liked:Price point, solidly built, excellent design, correct angle milled into the mount to compensate for the rainbow trajectory of air rifles, good value. Things I would have changed:Diana should strike a deal with Leapers to include this mount with every rifle they sell, in place of what they try and pass off as a scpoe
... Read MoreThings I liked:Price point, solidly built, excellent design, correct angle milled into the mount to compensate for the rainbow trajectory of air rifles, good value. Things I would have changed:Diana should strike a deal with Leapers to include this mount with every rifle they sell, in place of what they try and pass off as a scpoe mount. What others should know:Get this mount. If you try to use the mount that comes with these rifles you will regret it.
By Michael from USA on 2008-12-16 12:34:04 - See all my reviewsAdd comment to this review
Things I liked:good quality will hold scope without shift Things I would have changed:list that this will not work with the 350 mag What others should know:this will not work with my 350 magnum it overcompensates for droop and I can not adjust the leapers 4x16x50 scope enough shoots about 1 1/2 in to high at 35 yrds
... Read MoreThings I liked:good quality will hold scope without shift Things I would have changed:list that this will not work with the 350 mag What others should know:this will not work with my 350 magnum it overcompensates for droop and I can not adjust the leapers 4x16x50 scope enough shoots about 1 1/2 in to high at 35 yrds using beaman crow mags
By Edwin from USA on 2008-10-20 16:51:11 - See all my reviewsAdd comment to this review
Things I liked:Bought to use on a 34 combo, with the stock 4x32 scope. Quality appears to be pretty decent. Installation was somewhat simple. Everything locks down solidly. No problems sighting in our 34. Decent overall design, in spite of the fact that it does raise the mounting of the scope some (non-issue for us). Things
... Read MoreThings I liked:Bought to use on a 34 combo, with the stock 4x32 scope. Quality appears to be pretty decent. Installation was somewhat simple. Everything locks down solidly. No problems sighting in our 34. Decent overall design, in spite of the fact that it does raise the mounting of the scope some (non-issue for us). Things I would have changed:Lower price? Change the finish a little to match the more satin finish used in the Accushot scope rings; it?s okay but doesn?t quite match. What others should know:We first bought a set of low mount scope rings to minimize the height change. It didn?t work, the 32mm diameter & short length of the stock scope interfered with the compensator mount. Bought a set of medium height Accushot rings and all went together nicely.
By Robert from USA on 2008-10-16 11:52:11 - See all my reviewsAdd comment to this review
Things I liked:Well, I would've liked it if it worked. Things I would have changed:This base is so high that with the first rings I tried it with I could hardly get a sight picture without sticking my neck out What others should know:This base overcompensated for the droop in my 34 and I ended up having to shim the front
... Read MoreThings I liked:Well, I would've liked it if it worked. Things I would have changed:This base is so high that with the first rings I tried it with I could hardly get a sight picture without sticking my neck out What others should know:This base overcompensated for the droop in my 34 and I ended up having to shim the front rings which is the opposite to what you do with other bases that don't compensate for the droop. I bought it so I wouldn't have to shim, so this aspect was disappointing. I also had a severe windage problem that I couldn't figure out. In fairness to this base, it could have been the rings I used but I ran out of windage adjustment and couldn't get it zeroed. I kept running out of left windage adjustment. I finally gave up and used the Leapers Accushot one piece base and rings with the stop pin of the base hung over the front of the dovetail and a hard plastic shim under the scope at the rear ring. This works fine, and the only reason I was switching to the new "anti-droop" base is I thought it was a more elegant solution. It's not. At least it wasn't for me. The base makes the scope sit so high it looks and feels awkward. Use the Accushot one piece base and rings, hang the pin over the front of the dovetail, and, if you need to, shim the rear ring. It makes a solid mount that looks right and works great.
By LeRoy from USA on 2008-10-13 09:38:29 - See all my reviewsAdd comment to this review
Things I liked:well made, easy to mount, positive stops both for this mount and the weaver rings that mount on it, I wish it would work on my other rifle. Things I would have changed:I mounted it on a model 36 and unless other models have way more barrel droop than my 36, 20.7 inches at 30 yards is gross overkill. In my case half
... Read MoreThings I liked:well made, easy to mount, positive stops both for this mount and the weaver rings that mount on it, I wish it would work on my other rifle. Things I would have changed:I mounted it on a model 36 and unless other models have way more barrel droop than my 36, 20.7 inches at 30 yards is gross overkill. In my case half of that would be sufficient. I was able to adjust the elevation adequately on my scope to make it work. What others should know:if you mount a long scope on this base with a two piece mount, you may not be able to achieve as much forward movement of the scope as you would like. If you are just a recreational shooter, you will compensate and be happy with your purchase.
By Ron from USA on 2008-10-10 12:23:34 - See all my reviewsAdd comment to this review
Things I liked:package had everything needed to install a well built quality mount, by using this mount, i could center the crosshairs in my scope, kept the scope from being at end of adjustment , and the crosshairs tight. Things I would have changed:only downer , in my opinion, was it raised the sight plane, so now my cheek
... Read MoreThings I liked:package had everything needed to install a well built quality mount, by using this mount, i could center the crosshairs in my scope, kept the scope from being at end of adjustment , and the crosshairs tight. Things I would have changed:only downer , in my opinion, was it raised the sight plane, so now my cheek is higher on the stock, easily compsated for but , not as i like, but the difference is worth the height change, no movement of the mounts or scope. What others should know:other than a raised site plane, it was well worth the effort and money, both a bargain. try it you'll like it, hahhaa ron
By John from USA on 2008-09-26 05:38:34 - See all my reviewsAdd comment to this review
Things I liked:Easy instillation, adjustable compensation. Does what it says. Things I would have changed:Make it out of steel and no hex screw heads What others should know:Buy the lowest mount; because you will need a new type probably. []
By James from USA on 2008-09-20 15:46:57 - See all my reviewsAdd comment to this review
Things I liked:Solid,sturdy and fixes droop issues. Things I would have changed:Lower profile. Make out of steel. What others should know:Use LOW rings.
By Customer from USA on 2008-09-10 11:11:59 - See all my reviewsAdd comment to this review
Things I liked:Stops the scope shifting and barrel drooping problems! Things I would have changed:Being the first version this product is more than ok. However, criticizing is good if we want the product to improve: First of all, STEEL please! I have started seeing some deformation in the stop slots already.However, Is good to see
... Read MoreThings I liked:Stops the scope shifting and barrel drooping problems! Things I would have changed:Being the first version this product is more than ok. However, criticizing is good if we want the product to improve: First of all, STEEL please! I have started seeing some deformation in the stop slots already.However, Is good to see the damaging in this $17 mount and not in your rifle...
A little bit lower would have been better. You CAN'T have a proper alignment of your eye with the scope while keeping your cheekbone in the stock. I plan to use some comb padding. What others should know:Even if this problem is not related with the mount, please consider it seriously: Leapers rings are made of aluminum. There is no way you could tighten them properly without damaging them. Use some serius rings. I am thinking about using leupold PRWs
By Jeff from USA on 2008-09-08 14:31:46 - See all my reviewsAdd comment to this review
Things I liked:Easy installation, solid construction great design for the 34
Things I would have changed:Nada, it would be nice to have some adjustment, But for the money its a great mount. What others should know:I was about 10 inches [] at 30 yards with my scope adjusted for max elevation. I reset the scope to
... Read MoreThings I liked:Easy installation, solid construction great design for the 34
Things I would have changed:Nada, it would be nice to have some adjustment, But for the money its a great mount. What others should know:I was about 10 inches [] at 30 yards with my scope adjusted for max elevation. I reset the scope to the center of adjustment and re mounted the scope on the new mount and I was 1/2 inch [] at 30 yards. Lucky maybe. But it works for me!
By Customer from USA on 2008-09-08 08:25:31 - See all my reviewsAdd comment to this review
Things I liked:This mount "fixed" the problem with sheared mount stop screws and finally by Diana 34 is useful with my variable scope. Prior to this I had relegated it to open site use. Things I would have changed:Nothing What others should know:
By Matthew from USA on 2008-09-06 20:18:30 - See all my reviewsAdd comment to this review
Things I liked:It accomodates and conforms to just about any gun wih a droop issue. Initially when installed with rings and scope- the scope appears to point straight down to the muzzle. I've had far too many scopes that I just couldn't dial down far enough. In this case with th Leapers droop mount I was dialing up for a change! Very functional
... Read MoreThings I liked:It accomodates and conforms to just about any gun wih a droop issue. Initially when installed with rings and scope- the scope appears to point straight down to the muzzle. I've had far too many scopes that I just couldn't dial down far enough. In this case with th Leapers droop mount I was dialing up for a change! Very functional, sturdy, good screws. Things I would have changed:Nothing. It's a GEM! Wish RWS would've considered the idea aeons ago. What others should know:The barrel droop problem has been brought to the RWS table on a multitude of occaisions and fell on deaf ears. Other gun manufacturers as well. That other parties have stepped-up to the plate and produced the idea shows an element of integrity in the air-gunning world. I'm not harping RWS or any other manufacturer for their inability to listen to their clientelle. I'm simply grateful that someone LISTENED! This... IS the option to turn-to where barrel droop is an issue and Paul, I can't thank you enough for the suggestion! It works flawlessly!
By Mike from Greenwich from USA on 2008-09-01 08:41:27 - See all my reviewsAdd comment to this review
Things I liked:Quality craftmanship. Very well made. Things I would have changed:Nothing. What others should know:I was never happy with the scope mounts that came with my RWS 34. I was so unhappy with them that I took the scope off and shot it with the open sights. After receiving this product, the scope is now a permanent
... Read MoreThings I liked:Quality craftmanship. Very well made. Things I would have changed:Nothing. What others should know:I was never happy with the scope mounts that came with my RWS 34. I was so unhappy with them that I took the scope off and shot it with the open sights. After receiving this product, the scope is now a permanent fixture, I love it!
By Maribel from USA on 2008-08-28 20:27:26 - See all my reviewsAdd comment to this review
Things I liked:Simple yet effective, well made, inexpensive... Things I would have changed:Make an adjustable model... What others should know:Use the lowest rings you can find (Item#:RG18W-25L[PY-A-2445]), since this will make your scope sit pretty high (a 50mm scope can fit with low rings). I used a couple of different
... Read MoreThings I liked:Simple yet effective, well made, inexpensive... Things I would have changed:Make an adjustable model... What others should know:Use the lowest rings you can find (Item#:RG18W-25L[PY-A-2445]), since this will make your scope sit pretty high (a 50mm scope can fit with low rings). I used a couple of different scopes on this mount and found that some still did need shimming, while others didn't. If you have a scope with limited elevation, you may run out of clicks. If you're have this issue, try different brand scopes. I initially used this base with a 3-9x40 and 4-16x40 centerpoint and ran out of clicks (was still 1" high at 20 yards). I then tried a leapers and a bushnell and didn't have any issues. Other than that, this is an excellent, economical solution...
By Jeff from USA on 2008-08-22 13:33:47 - See all my reviewsAdd comment to this review
Things I liked:Easy installation Things I would have changed:Nothing What others should know:It worked perfectly on my 34. I had a one peice mount and with all of the elevation i was 6 inches low at 30 yards. I centered the scopes elevation screw and mounted the scope on the base. 1 Shot dead on. I had to adjust about
... Read MoreThings I liked:Easy installation Things I would have changed:Nothing What others should know:It worked perfectly on my 34. I had a one peice mount and with all of the elevation i was 6 inches low at 30 yards. I centered the scopes elevation screw and mounted the scope on the base. 1 Shot dead on. I had to adjust about 6 clicks up.
By Customer from USA on 2008-08-18 11:42:41 - See all my reviewsAdd comment to this review
Things I liked:the mount stops your scope from slipping back and it fits very well, good job on that part. Things I would have changed:make it adjustable somehow What others should know:the base made my panther 34 shoot to high over compenfate the barrel droop. had to shim my scope anyway to correct the p.o.i.
By William from USA on 2008-08-12 15:05:49 - See all my reviewsAdd comment to this review
Things I liked:Every thing, it works as advertised ,easy installation ,easy sight in scope stays put ! Things I would have changed:Nothing ! What others should know:Leapers got it right !
By J.C. from USA on 2008-08-11 10:47:48 - See all my reviewsAdd comment to this review
Things I liked:I am a machinist by trade so I can appriciate the workmanship put into this product. The mount fits like a glove and looks good. Excellent design!! Things I would have changed:For what it is, I wouldn't change a thing. The majority of RWS springers will greatly benifit from this mount. What others should
... Read MoreThings I liked:I am a machinist by trade so I can appriciate the workmanship put into this product. The mount fits like a glove and looks good. Excellent design!! Things I would have changed:For what it is, I wouldn't change a thing. The majority of RWS springers will greatly benifit from this mount. What others should know:Not all RWS models have the amount of barrel droop that this mount compensates for. This mount didn't work for my particular gun (model 34) because it over compensated. I use a Leupold straight 6x for optics and a Beeman one piece mount. With this setup I shot about 12" low at 30 yards and had to use most of my elevation upwards adjustment to correct it. With the new Leapers mount, Weaver rings and the same scope, I shot about 30" high at 30 yards but didn't have enough downwards elevation adjustment in the scope to get any closer than 6" high at 30 yards. I hope that Leapers will produce this mount with a variety elevation compensations to compliment the design. A recommendation would be in 6" increments. I know this would be challenging to keep the costs down, but I think they would still sell alot of them because people like myself would probably buy a full set of them in order to keep the scope running as close to optically centered as possible. Plus it would be alot of fun trying different combinations of scopes, rings, and pellets.
By Customer from USA on 2008-08-05 23:06:52 - See all my reviewsAdd comment to this review
Things I liked:Everything this mount is ROCK SOLID and solves all probs with my 350 mag.Thanks to this mount i now own one MEAN and VERY ACCURATE springer Things I would have changed:NOTHING What others should know:I have it on a RWS 350 mag with MED rings
By Brian from USA on 2008-07-28 21:27:33 - See all my reviewsAdd comment to this review
Things I liked:Brianag618; Very interesting design and idea. Fits well and very easy to install. Does exactly what it was designed to do. Things I would have changed:To the product it self nothing, needs to be included when you buy an RWS Rifle. What others should know:Before you switch out your existing scope and use
... Read MoreThings I liked:Brianag618; Very interesting design and idea. Fits well and very easy to install. Does exactly what it was designed to do. Things I would have changed:To the product it self nothing, needs to be included when you buy an RWS Rifle. What others should know:Before you switch out your existing scope and use this device, I strongly advice, if you have a Laser Scope to make sure it is sighted in correctly, it will make adjusting and sighting in your scope using this device very easy, if not get one and save your self a lot of time sighting in your scope.
Also sugggest that you buy a New Set of Leapers Scope Mounts, Leapers # LPS-RG18W-25L. These are Low Profile mounts and come with a Knub on the bottom of the mount that LOCKS into the Weaver Rail Slots of the New Scope Mount, also preventing the Scope from Shifting.
Do not be surprised if after mounting your scope on this New Mount, that you will have to Lower your adjusting knob to its lowest point, to start resighting in your scope. If you take your time and set this New Mount up correctly you will be very happy with the results, it will also help shooting at longer ranges, because it changes your elavation settings, but may give you a problem if trying to shoot at less then 20 yrds, do to your scope being bottomed out, to make up for shooting at the longer ranges. Does help with groups once you get use to using it. Who ever helped design this mount, did a great job.
