Leapers' scope mount base has a "recoil shock shoulder" in the front (left) that prevents it from shifting--ever! At right, the back of the scope mount base has a cut-out that accommodates the screw at the back of your rifle's original 11mm dovetail.
Roll over image to zoom in
1-year limited warranty
List Price $24.00, Orig.Price $18.97 Save $9.00 (47%)
Earn 10 Bullseye Bucks
and share your thoughts with other customers
Things I liked: Just the thing to make mounting a scope feasible on Diana recoilless rifles with barrel droop. Price is fair, quality is good.
Things I would have changed: It should be longer so it can extend rearward over the whole rail of a Diana 54 or 56, and let the shooter have and affordable scope (read: short eye relief) mounted comfortably far back. Use blue thread locking fluid. If this is not possible, due to it having to accommodate the 460, make two different versions. Until that happens, get yourself a high quality scope with long eye relief. (ex. Burris Timberline 4-16x33)
What others should know: The hook goes over the FRONT of the built-in scope mount, not the back. If you've bought any of the rifles this is advertised for, you should get it, and a set of Weaver rings to go with it. and some blue loctite.
Things I liked: price
Things I would have changed: No quality control on the finished part and could not be used as I received it. The dove tail cut radius that ended at the front stop was not fully relieved by the side cut. A small portion of the radius remained and the front stop would not contact the front of the dove tail rail on the gun. I had to get out the dremill tool and grind away on the part until the interference was removed. Either poor design or poor machining with no quality control to inspect the feature dimension. Without the modification I made the part was useless
What others should know: without modifying the part it is defective
Things I liked: Product is well made, and easy to install. Works well on my Diana 54 Air King -- now at about 1000 shots post-install -- and my Diana Model 52 (newly installed). I used blue Loc-Tite and have not had any problems.
Things I would have changed: Nothing
What others should know: It does add quite a bit of height, so you may well want low scope rings -- depending on the bell diameter of your scope.
Show Other Reviews and share your thoughts with other customers
I changed my diana 48 to a t06 System, i used this system before on my t05 ....any recomendations for a t06 system ? I want some droop compensation and the weaver rail
Will this work on an RWS 350 magnum with T05
If I am using this mount on a RWS 54, and I would like to mount a scope with a 50mm objective lens, what is the minimum ring height I would need for clearance?
medium rings should do