Item Code: HN-92254500003 [PY-P-754]
|Head Size||4.50 mm|
|Muzzle Energy||30 ft/lbs|
|Muzzle Velocity||919 fps|
|Energy at 25 yds||24 ft/lbs|
|Velocity at 25 yds||840 fps|
|Energy from the initial value at 25 yards||84 % Retained energy at 25 yds (an expression of the 25-yd energy compared to the muzzle energy)|
|Energy at 50 yds||21 ft/lbs|
|Velocity at 50 yds||774 fps|
|Energy from the initial value at 50 yards||71 % Retained energy at 50 yds (an expression of the 50-yd energy compared to the muzzle energy)|
Things I liked: Tried these first in a Beeman Silver Kodiak. Yes, the can says PCP only, but a magnum springer has no trouble firing these in case anyone is interested. They are difficult to seat but I was using one of the pellet pens with an integral seater and with extra effort, they seated well. I like these pellets. Can't speak to penetration because I haven't checked to see how far they penetrate into my backstop. I use old magazines (about a 3" thick stack inside of a resized cardboard box for a backstop. It is silent and traps everything I have fired into it so far including including pellets from my .22 Marauder.
Things I would have changed: Add "or Magnum Breakbarrels" to the label on the can :)
Things I liked: The shape,I have tried these out of my break barrels and a few pumpers,now my 1st phase 1377 had no prob shooting then even with the heavy weight, but the pc77 did ,had to pump it another 10 times to get the pellet to clear the barrel, now they shot fine out of my Rem.Adavantage & my Ruger Air hawlk as well as my Ben.Trail NP XL.They had a tight fit but loaded ok in the break barrels , in the pumppers the loaded fine , I even have bagged 3 rabbits with the 1377s using them at about 15yards one shot kills.
Things I would have changed: maybe not make them fit so tight so the feed in more rifles better.
What others should know: because of the weight you would want to shoot them out of a more powerful rifle but it all depends on your gun cuz ya got to find out what it wants as amo.
Things I liked: Shape and tight fit/seal
Things I would have changed: offer larger tins and and a hollow point similar to there grizzly 357 pellets
What others should know: I've read the reviews of others who couldn't get them to group. With my RWS 350 magnum I' getting 1/4 inch groups at 25 yards. That's after firing about 1/2 a tin. Looks like it will be great for hunting if you have a high power gun.
Will they fit Umarex Octane .177
Could someone please tell me the length of this pellet? Why in the world they don't show that I will never figure out.
Will these fit a Hatsan vortex piston
Yes, they will fit.