Air Arms TX200 MkIII Air Rifle

The walnut stock is outstanding. This is a very nice, smooth shooting rifle and it looks fantastic. It's a joy to shoot.

There is a little rubber bumper that is press fit into a hole between the barrel and the cocking level that fell out. I was able to get it back in place, but it's a bit cheap and silly on a rifle that is otherwise excellent quality. I haven't done any modifications or tuning. Accuracy is quite good, but I frankly expected a little better. It's not bad, and I would certainly recommend this rifle, but at 10 meters, even with a bench rest, it's not going to put every pellet through the same hole. It's accurate to be sure, but not in the realm of being superb.

A very good quality, nice looking and fun to shoot rifle. I like how the cocking mechanism works and it's really smooth. The walnut stock is very well made.

This is a beautiful rifle. I rate a 10/10 on looks alone. It is also very accurate and a pleasure to shoot. It is absolutely an equal to my Weihrauch HW-97k and satisfying to own such great rifles. My ratings for the TX200 are 10/10 for accuracy and the value for money.

Nothing.

Pyramid Air stands behind their sales. It is safe to purchase them them.

The TX 200 Mk III .22 caliber is my first under lever springer and all I can say is it is magnificent! Accurate, fairly quiet, and a joy to shoot. Hammers squirrels! It a bit on the heavy side, but for good reasons. I put a Hawk Airmax 4-12x40 OA AMX scope on it and it is solid and I love the reticle. You'll love it!

Maybe a bit tinner wood width on the front part of the wood stock.

Incredible value for what you are getting.

The number 1 thing I like about the rifle is tge accuracy. Number 2 is the ease of rebuilding it. I have over 15,000 rounds through it. I've put two rebuild kits in it. A new piston, and a new compression tube. The compression tube was completely worn out. The piston had deep cracks. That sounds like a negative but in all reality the gun is so easy to work on it is a positive. For under 100 bucks I have a new gun.

I wish the rifle was drilled and tapped for a scope base like centerfire rifles.

These guns are more than capable of hunting ground hogs and rock Chucks. Head shots must be taken.

The overall gun is beautiful. The blueing is second to none and I'm pleased with the beach wood. The weather here in Northwest indiana isn't cooperating with me shooting and sighting the gun in. The little I've shot it shows the accuracy this gun is capable of.

I read a lot of reviews on this gun and one thing mentioned a lot was the little plug on the bottom of the barrel falling out. It's called a buffer and it prevents the cocking arm from contacting the barrel when closing. The usual fix is to install "0" rings on the cocking arm (it has grooves and the "0" rings look like original design). On a gun approaching $800.00 with tax (more if you want walnut) that AirArms could address this problem. I guess it's more of a nuisance as it doesn't affect the performance. The hole has threads but I don't know the size. Perhaps a nylon screw or set screw would accomplish the same thing minus the falling out after around 50 shots.

I purchased a Hawke Airmax 4x12x40 scope with the medium scope rings but had to get the tall scope rings as the scope AO was actually setting on the barrel with the medium. Go ahead and purchase the "0"rings & install on the cocking arm so when the plug falls out you won't accidentally mark that beautiful blueing.

Beautiful gun! Shoots well!!!!

Beauty, ease of operation. I got mine from another vendor a couple of years ago at a better price. I hit the wood lottery with a walnut stock, and got one with a lot of burl in the buttstock, blending to tigerstripe in the forearm. very accurate, and an excellent trigger.

Weight, even with the walnut stock it is extremely heavy, Beech would be even more. They need to do something to put it on a diet. Same as the ProSport.

Pyamid is one of the best dealers of a few I do business with.

Solid built all metal gun with no plastic parts. Beautifully carved walnut

Not being able to see the grain before it ships. Also my trigger guard is really badly done it looks like the cut the metal on the saw and painted over the saw marks. Also on the right side of the gun part of the grain looks like a crack on the stock or maybe they professionally repaired the crack. Hard to tell and I'm a wood worker.

When I text pyramid air a picture they didn't really seem to care. Which is a shame considering I heard nothing but great things about there customer service. I'm gonna see if the trigger guard Is supposed to be in this rough of shape and maybe talk to air arms about the possible crack repair. Or maybe it's the grain.

First of all this is a beautiful air rifle. I have shot it some and it has good accuracy, but i have bkl mounts on it and they will not lock down and stop sliding rearwards. These were recommended by Pyramyd and i mentioned that they didn't have a stop pin, but he said they would work and have not. Other than the mounts, this is a nice gun to add to your collection.

Nothing besides my scope mounts.

It's expensive, but you are getting a quality gun that will last for years.

Not a single cheap part from stock to barrel to cocking lever and ball stop. Extremely accurate and nice lght cocking force.

I would add sling attachments on left side and I include a right angle pellet seating tool. I made an STL file and 3d printed one so fingers never enter danger zone.

Order one im immediately