- Home
- Customer Reviews
Air Venturi Male Quick-Disconnect, 1/8" BSPP Female Threads, Steel, Rated to 5000 PSI, Incl. Delrin Seal reviews - page 1
Create an online reviewand share your thoughts with other customers
| The most favorable review | The most critical review | |
|---|---|---|
1 of 1 people found the following review helpful:
By Dennis from USA on 2012-05-25 23:35:29 Things I liked:delrin seal works greatThings I would have changed:nothing What others should know:works great on my Edgun fill probe |  |
0 of 0 people found the following review helpful:
By Stephen from USA on 2013-02-08 21:55:25 Things I liked:Nothing, as this is a POOR quality part and will not fit a standard foster female fitting on a pumo. Please note the quality of the fitting is horrible. It does NOT fit into a foster female adapter due to poor workmanship and bad tolerances. I puschsed this only to find it would not fit my pump causing at least another week at best to get a chance to shoot a new PCP pistol I purchased.Things I would have changed:Actually QA parts when then come in as well as before shipping What others should know:Pyramyd Air quality control is slipping and we need to make sure we let them know this is not acceptable and have other alternatives where we can purchase air guns and related supplies. |
- 123
- Things I liked:Purchased this to connect a Sam Yang rifle to a Benjamin Pump. Works great so far.
Things I would have changed:The black coating flaked off a little...not sure if this could contaminate the air chamber or not. Just keeping my on eye on it. No problems. - Things I liked:It works
Things I would have changed:$10 for a fitting !!!
What others should know:May be able to find alternatives at hardware store for much less. BUT then again, time and gas all adds up. - Things I liked:It gets the job done. I needed it to fill my Pneuma which hooked to their fitting so I could attach to my Benjamin pump.
Things I would have changed:Wish it was stainless for the price.
What others should know:Would suggest using teflon tape when you install it. - Things I liked:The nylon washer alows presure to bleed off when I take a break.
Things I would have changed:The way it seals - Things I liked:Good workmanship, a little Teflon tape and it mated up perfectly with my Evanix fill probe.
Things I would have changed:N/A
What others should know:Make sure you have some Teflon tape. - Things I liked:worked perfect and the price is reasonable
Things I would have changed:nothing - Things I liked:This connector works great. I have the Benjamin High-Pressure Hamd Pump and I separated the hose from the pump body with this connector Screwed onto hoseend that came off of the Pump Body.
Things I would have changed:nothing - Things I liked:Nothing, as this is a POOR quality part and will not fit a standard foster female fitting on a pumo. Please note the quality of the fitting is horrible. It does NOT fit into a foster female adapter due to poor workmanship and bad tolerances. I puschsed this only to find it would not fit my pump causing at least another week at best to get a chance to shoot a new PCP pistol I purchased.
Things I would have changed:Actually QA parts when then come in as well as before shipping
What others should know:Pyramyd Air quality control is slipping and we need to make sure we let them know this is not acceptable and have other alternatives where we can purchase air guns and related supplies. - Things I liked:Material and seal, functional
- Things I liked:Nice work, clean threads, no burrs. Built in seating gasket.
Things I would have changed:N/A
What others should know:This makes changing back & forth from a quick disconnect to a probe on the same air source so simple. If you've got an air gun with a Foster connection & one with an air probe you definitely need this adapter. *Teflon tape threads of probe for proper seal.* - Things I liked:well constructed, should work
Things I would have changed:ADD more than one seal in package
What others should know:Basically the product is workable, BUT the delrin seal if not precisely placed correctly will DEFORM when used and CAN close-up and block the air hole so NO air will flow thru. Since only 1 seal is enclosed, you only get one chance then unit is USELESS JUNK. - Things I liked:Got several of these to share a hand pump with several PCP airguns. These quick-connect adapters worked flawlessly (smooth connect/disconnect, and no leaks).
Things I would have changed:Nothing
What others should know:I used a very light touch of thread sealant (yellow rectorseal) on threads. - Things I liked:Works great. Install it on your fill probe and you're done. Simple Nd effective.
Things I would have changed:Nothing.
What others should know:I bought this to make it easy to switch between filling my Foster type airguns (Marauder) to an Air Arms type probe. Works great. Just screw this onto the Air Arms probe and it then attaches easily to the Foster quick-connect on my tank hose. I recommend this item. - Things I liked:I bought this for my older air arms s410c. It fit the fill plug perfectly and now I have a quick disconnect for my air arms. It was always a pain before to get out the wrench and take off my quick disconnect to attach the fill plug. This was a very inexpensive way to solve the problem.
Things I would have changed:Nothing
What others should know:Get this product, leave your tools at home, enjoy easy filling and shooting again. - Things I liked:Perfect for the Hatsan fill probe! Works like a charm.
Things I would have changed:Nothing comes to mind.
What others should know:Fits Hatsan fill probes like the one for the AT44S-10. - Things I liked:The Delrin seal did indeed seal it up tight with no teflon tape needed.
Things I would have changed:Nothing really. I mean, it's just a little steel adapter. - Things I liked:I recieved this with my Air Arms and read a review advising not to overtighten the quick disconnect because the plastic derlin seal would be crushed. It was leaking air so I called Pyramid Air product expert and he told me to tighten it with a wrench and not to worry about crushing the seal. W0rks great.
- Things I liked:Said it before, these little guys are great. They save me a lot of time, they don't wear out, and I've never had one leak
Things I would have changed:They are a little pricey for a simple device ( Get over It, their worth it).
What others should know:Use a couple of laps of teflon tape and tighten well. If it leaks tighten it a little more. - Things I liked:Works well. Makes for an easy hook up.
Things I would have changed:Nothing.
What others should know:Might want to use plumbers tape, plumbers putty, or lock tite just to seat it permanently. - 123
| Show: | Items |
Overall rating:4 4.0
Value for money:4 4.0
See all my reviews