Page 13 - Air Venturi Male QD, 1/8" Reviews

Nothing, as this is a POOR quality part and will not fit a standard foster female fitting on a pumo. Please note the quality of the fitting is horrible. It does NOT fit into a foster female adapter due to poor workmanship and bad tolerances. I puschsed this only to find it would not fit my pump causing at least another week at best to get a chance to shoot a new PCP pistol I purchased.

Actually QA parts when then come in as well as before shipping

Pyramyd Air quality control is slipping and we need to make sure we let them know this is not acceptable and have other alternatives where we can purchase air guns and related supplies.

Material and seal, functional

Nice work, clean threads, no burrs. Built in seating gasket.

N/A

This makes changing back & forth from a quick disconnect to a probe on the same air source so simple. If you've got an air gun with a Foster connection & one with an air probe you definitely need this adapter. *Teflon tape threads of probe for proper seal.*

well constructed, should work

ADD more than one seal in package

Basically the product is workable, BUT the delrin seal if not precisely placed correctly will DEFORM when used and CAN close-up and block the air hole so NO air will flow thru. Since only 1 seal is enclosed, you only get one chance then unit is USELESS JUNK.

Got several of these to share a hand pump with several PCP airguns. These quick-connect adapters worked flawlessly (smooth connect/disconnect, and no leaks).

Nothing

I used a very light touch of thread sealant (yellow rectorseal) on threads.

Works great. Install it on your fill probe and you're done. Simple Nd effective.

Nothing.

I bought this to make it easy to switch between filling my Foster type airguns (Marauder) to an Air Arms type probe. Works great. Just screw this onto the Air Arms probe and it then attaches easily to the Foster quick-connect on my tank hose. I recommend this item.

I bought this for my older air arms s410c. It fit the fill plug perfectly and now I have a quick disconnect for my air arms. It was always a pain before to get out the wrench and take off my quick disconnect to attach the fill plug. This was a very inexpensive way to solve the problem.

Nothing

Get this product, leave your tools at home, enjoy easy filling and shooting again.

Perfect for the Hatsan fill probe! Works like a charm.

Nothing comes to mind.

Fits Hatsan fill probes like the one for the AT44S-10.

The Delrin seal did indeed seal it up tight with no teflon tape needed.

Nothing really. I mean, it's just a little steel adapter.

I recieved this with my Air Arms and read a review advising not to overtighten the quick disconnect because the plastic derlin seal would be crushed. It was leaking air so I called Pyramid Air product expert and he told me to tighten it with a wrench and not to worry about crushing the seal. W0rks great.

Said it before, these little guys are great. They save me a lot of time, they don't wear out, and I've never had one leak

They are a little pricey for a simple device ( Get over It, their worth it).

Use a couple of laps of teflon tape and tighten well. If it leaks tighten it a little more.

Works well. Makes for an easy hook up.

Nothing.

Might want to use plumbers tape, plumbers putty, or lock tite just to seat it permanently.

These fittings works great and no more leaks. I have a large collection of airguns and now I fill them all with the same hose. The derlin seal is the key to how great these work.

Maybe drop the price a few dollars...that's about it.

Buy one of these for each different fill probe you have and DON"T over tighten them when you put them together. The derlin will seal the connection but if you go too tight it will crush the seal and block the air flow. They fit a little tight in my female quick connect but work perfect on all my fill probes. This is a 5000 psi rated steel fitting with BSPP threads that matches the fill probes of most of the imported air rifles such as Evanix, Sam Yang, Hammerli, Hatsan etc. Stay away from the brass fittings when using high pressure air.

well made, this is such a good deal, worked very well for my HW100 fill probe, now I can use it on 2 tanks with quick disconnect

change shipping to $3 in a bubble envelope

it's a actually a lot smaller then a picture suggests

I bought this for a Hammerli Pneuma Elite 1/8" BSPP fill probe. It was a very straight forward installation and works well in that application.

Excellent connector! Before, I had to put teflon tape on "not-too-perfect" matching threads and screw the parts as hard as I could.. Now it is a snap - delrin seal does the job, and threads match perfectly. Price is lower than expected...... Thank you, Pyramid Air! :)

they should know what I have written (perfect description of this item)! :)

Much better design than the ones that use the rubber washer no leaks at all.

Clean the threads up my fitting went in hard thought it was gona stripp my probe but it didnt.

Ur probe will probly start in hard but it will tighten up and not strip the threads.

Reasonably priced, functional. Great for probe quick change for multiple pcp guns.

The machining on the threads is a little course.

delrin seal works great

nothing

works great on my Edgun fill probe

Not expensive and saves a lot of time. I own a bunch of PCPs all with different size probes. I put one on all of them.Makes life easier than threading and unthreading each time I switch guns.

Nothing at all- they work great.

Delrin seals very good but I still put a couple of laps of teflon tape around the probe threads before attaching .Never had a leak in any of them.