Shopping Cart Items

    CheckoutSubtotal:
    does not include shipping and tax

    Air Venturi Male Quick-Disconnect, 1/8" BSPP Female Threads, Steel, Rated to 5000 PSI, Incl. Delrin Seal reviews - page 3

    Add to Cart


    Share on FacebookShare on Twitter

    Create an online reviewand share your thoughts with other customers
    The most helpful favorable reviewThe most helpful critical review
    1 of 1 people found the following review helpful:

    Overall rating:5.0

    Value for money:5.0

    By Dennis from USA on 2012-05-25 23:35:29

    Things I liked:delrin seal works great
    Things I would have changed:nothing
    What others should know:works great on my Edgun fill probe
    0 of 0 people found the following review helpful:

    Overall rating:1.0

    Value for money:1.0

    By Craig from USA on 2013-07-29 22:39:13

    Things I liked:It looks like it would work.
    Things I would have changed:The first one of these I received was stripped- I think they sent one that someone else had sent back. The replacement I received leaks and the delrin seal is useless. I'm not sure what alternatives there are but I'm not so pleased with this.
    What others should know:It leaks.
    Sort by:
    • « Previous 1234 Next »
    • Show:
      Items
    • Overall rating:5.0 5.0

      Value for money:1.0 1.0

        By william from USA on 2013-03-26
      See all my reviews
       Was this review helpful?
      0.00 ratings
       
      Things I liked:It works
      Things I would have changed:$10 for a fitting !!!
      What others should know:May be able to find alternatives at hardware store for much less. BUT then again, time and gas all adds up.
    • Overall rating:5.0 5.0

      Value for money:3.0 3.0

        By Larry from USA on 2013-03-25
      See all my reviews
       Was this review helpful?
      0.00 ratings
       
      Things I liked:It gets the job done. I needed it to fill my Pneuma which hooked to their fitting so I could attach to my Benjamin pump.
      Things I would have changed:Wish it was stainless for the price.
      What others should know:Would suggest using teflon tape when you install it.
    • Overall rating:4.0 4.0

      Value for money:5.0 5.0

        By Edwin from USA on 2013-03-24
      See all my reviews
       Was this review helpful?
      0.00 ratings
       
      Things I liked:The nylon washer alows presure to bleed off when I take a break.
      Things I would have changed:The way it seals
    • Overall rating:5.0 5.0

      Value for money:5.0 5.0

        By Dave from USA on 2013-03-17
      See all my reviews
       Was this review helpful?
      0.00 ratings
       
      Things I liked:Good workmanship, a little Teflon tape and it mated up perfectly with my Evanix fill probe.
      Things I would have changed:N/A
      What others should know:Make sure you have some Teflon tape.
    • Overall rating:5.0 5.0

      Value for money:5.0 5.0

        By James from USA on 2013-02-17
      See all my reviews
       Was this review helpful?
      0.00 ratings
       
      Things I liked:worked perfect and the price is reasonable
      Things I would have changed:nothing
    • Overall rating:5.0 5.0

      Value for money:5.0 5.0

        By Lee from USA on 2013-02-11
      See all my reviews
       Was this review helpful?
      0.00 ratings
       
      Things I liked:This connector works great. I have the Benjamin High-Pressure Hamd Pump and I separated the hose from the pump body with this connector Screwed onto hoseend that came off of the Pump Body.
      Things I would have changed:nothing
    • Overall rating:1.0 1.0

      Value for money:1.0 1.0

        By Stephen from USA on 2013-02-08
      See all my reviews
       Was this review helpful?
      0.00 ratings
       
      Things I liked:Nothing, as this is a POOR quality part and will not fit a standard foster female fitting on a pumo. Please note the quality of the fitting is horrible. It does NOT fit into a foster female adapter due to poor workmanship and bad tolerances. I puschsed this only to find it would not fit my pump causing at least another week at best to get a chance to shoot a new PCP pistol I purchased.
      Things I would have changed:Actually QA parts when then come in as well as before shipping
      What others should know:Pyramyd Air quality control is slipping and we need to make sure we let them know this is not acceptable and have other alternatives where we can purchase air guns and related supplies.
    • Overall rating:5.0 5.0

      Value for money:4.0 4.0

        By Jorge from USA on 2013-01-24
      See all my reviews
       Was this review helpful?
      0.00 ratings
       
      Things I liked:Material and seal, functional
    • Overall rating:5.0 5.0

      Value for money:4.0 4.0

        By Dave from USA on 2013-01-22
      See all my reviews
       Was this review helpful?
      0.00 ratings
       
      Things I liked:Nice work, clean threads, no burrs. Built in seating gasket.
      Things I would have changed:N/A
      What others should know:This makes changing back & forth from a quick disconnect to a probe on the same air source so simple. If you've got an air gun with a Foster connection & one with an air probe you definitely need this adapter. *Teflon tape threads of probe for proper seal.*
    • Overall rating:2.0 2.0

      Value for money:1.0 1.0

        By Daryl from Canada on 2013-01-20
      See all my reviews
       Was this review helpful?
      1.01 rating
       
      Things I liked:well constructed, should work
      Things I would have changed:ADD more than one seal in package
      What others should know:Basically the product is workable, BUT the delrin seal if not precisely placed correctly will DEFORM when used and CAN close-up and block the air hole so NO air will flow thru. Since only 1 seal is enclosed, you only get one chance then unit is USELESS JUNK.
    • Overall rating:5.0 5.0

      Value for money:5.0 5.0

        By David from USA on 2013-01-16
      See all my reviews
       Was this review helpful?
      0.00 ratings
       
      Things I liked:Got several of these to share a hand pump with several PCP airguns. These quick-connect adapters worked flawlessly (smooth connect/disconnect, and no leaks).
      Things I would have changed:Nothing
      What others should know:I used a very light touch of thread sealant (yellow rectorseal) on threads.
    • Overall rating:5.0 5.0

      Value for money:4.0 4.0

        By Ronald from USA on 2013-01-04
      See all my reviews
       Was this review helpful?
      0.00 ratings
       
      Things I liked:Works great. Install it on your fill probe and you're done. Simple Nd effective.
      Things I would have changed:Nothing.
      What others should know:I bought this to make it easy to switch between filling my Foster type airguns (Marauder) to an Air Arms type probe. Works great. Just screw this onto the Air Arms probe and it then attaches easily to the Foster quick-connect on my tank hose. I recommend this item.
    • Overall rating:5.0 5.0

      Value for money:5.0 5.0

        By charles from USA on 2012-12-11
      See all my reviews
       Was this review helpful?
      0.00 ratings
       
      Things I liked:I bought this for my older air arms s410c. It fit the fill plug perfectly and now I have a quick disconnect for my air arms. It was always a pain before to get out the wrench and take off my quick disconnect to attach the fill plug. This was a very inexpensive way to solve the problem.
      Things I would have changed:Nothing
      What others should know:Get this product, leave your tools at home, enjoy easy filling and shooting again.
    • Overall rating:5.0 5.0

      Value for money:5.0 5.0

        By Ogre8472 from USA on 2012-12-06
      See all my reviews
       Was this review helpful?
      0.00 ratings
       
      Things I liked:Perfect for the Hatsan fill probe! Works like a charm.
      Things I would have changed:Nothing comes to mind.
      What others should know:Fits Hatsan fill probes like the one for the AT44S-10.
    • Overall rating:5.0 5.0

      Value for money:4.0 4.0

        By Zack from USA on 2012-11-27
      See all my reviews
       Was this review helpful?
      0.00 ratings
       
      Things I liked:The Delrin seal did indeed seal it up tight with no teflon tape needed.
      Things I would have changed:Nothing really. I mean, it's just a little steel adapter.
    • Overall rating:5.0 5.0

      Value for money:5.0 5.0

        By Clay from USA on 2012-11-08
      See all my reviews
       Was this review helpful?
      0.00 ratings
       
      Things I liked:I recieved this with my Air Arms and read a review advising not to overtighten the quick disconnect because the plastic derlin seal would be crushed. It was leaking air so I called Pyramid Air product expert and he told me to tighten it with a wrench and not to worry about crushing the seal. W0rks great.
    • Overall rating:5.0 5.0

      Value for money:5.0 5.0

        By richard from USA on 2012-11-05
      See all my reviews
       Was this review helpful?
      0.00 ratings
       
      Things I liked:Said it before, these little guys are great. They save me a lot of time, they don't wear out, and I've never had one leak
      Things I would have changed:They are a little pricey for a simple device ( Get over It, their worth it).
      What others should know:Use a couple of laps of teflon tape and tighten well. If it leaks tighten it a little more.
    • Overall rating:5.0 5.0

      Value for money:5.0 5.0

        By Chris from USA on 2012-10-13
      See all my reviews
       Was this review helpful?
      0.00 ratings
       
      Things I liked:Works well. Makes for an easy hook up.
      Things I would have changed:Nothing.
      What others should know:Might want to use plumbers tape, plumbers putty, or lock tite just to seat it permanently.
    • Overall rating:5.0 5.0

      Value for money:5.0 5.0

        By Devin from USA on 2012-08-24
      See all my reviews
       Was this review helpful?
      0.00 ratings
       
      Things I liked:These fittings works great and no more leaks. I have a large collection of airguns and now I fill them all with the same hose. The derlin seal is the key to how great these work.
      Things I would have changed:Maybe drop the price a few dollars...that's about it.
      What others should know:Buy one of these for each different fill probe you have and DON"T over tighten them when you put them together. The derlin will seal the connection but if you go too tight it will crush the seal and block the air flow. They fit a little tight in my female quick connect but work perfect on all my fill probes. This is a 5000 psi rated steel fitting with BSPP threads that matches the fill probes of most of the imported air rifles such as Evanix, Sam Yang, Hammerli, Hatsan etc. Stay away from the brass fittings when using high pressure air.
    • Overall rating:5.0 5.0

      Value for money:5.0 5.0

        By Dmitry from USA on 2012-08-21
      See all my reviews
       Was this review helpful?
      0.00 ratings
       
      Things I liked:well made, this is such a good deal, worked very well for my HW100 fill probe, now I can use it on 2 tanks with quick disconnect
      Things I would have changed:change shipping to $3 in a bubble envelope
      What others should know:it's a actually a lot smaller then a picture suggests
    • « Previous 1234 Next »
    Shop at Gun Mall
    Back to Top