UTG 11mm-to-Weaver Adapter, Vertical Scope Reviews

Actually, this was purchased for use on a Ruger 10/22, with a red/green dot sight. Solid mount that allows for mounting "big gun" scopes and sights on a .22, which has mountings similar to what would be found on an air gun.

Shortening slightly, but otherwise no changes needed.

Not just for air guns - also can be used on "real" firearms.

Good quality - solid mount. Lets you use any Weaver-style ring on an 11 mm rail

No changes needed in my opinion

Keep in mind that, depending on what you mount it on, that the mount may take up space over your gun's loading port. That may prevent you from using a magazine, since it sit slow on the receiver. If you're using only on a single shot gun, it may not be a problem - just keep the height in mind.

I have bought these in the past and been pleased with them . So I have purchased them again .

Nothing

They work well with the UTG bipods .

It worked as advised on the Benjamin NP Trail pistol

Nada

It puts a red dot on the pistol just fine

I was easy to Install.

Great fix for a scope that would not fit the barrel.

Great for mounting a holographic sight on my 41 year old Camo EXPO. It mounted securely and looks Good!

I needed an adaptor to mount a pistol scope with weaver rings on my 1322 with steel breech this did the job well a solid mount Also raised scope for better access to load pellets

It's fine as is

This adaptors quality is as good as others at twice the price

It's sturdy and good price.

It works as advertised. Don't know what's not to like about this.

Perfect for a UTG point sight with weaver mount.

Nothing.

Has quality construction. Good metal. Always wondered why the design has the shape it does. But at least with Leopold rings, the body of the screw locks down in between the ribs of the weaver top.

Works very well on my springer. Was never able to keep the scope stable before.

Nothing

Solid.Not much more to say for the first mount I can count on for a magnum springer with a heavy scope.

Don't mess with something that works.

Easy to mount with the included screws . This allowed me to convert the 11mm dovetail on my rifle to a weaver mount for mounting red dot scope

Not a thing

Excellent!! Just what I been looking for my .22 cal rifle. Thanks.

Be a safe shooter.

Purchase this mount/adpt,,,,to use on my Crosman 357 pellet revolver which has a raised dovetail....so that I could mount a red dot sight on it...fits like a glove.....

nothing.....

Allows you to mount a scope that has weaver rings on to the 11mm mounting rails. Works as designed.

Nothing that I know.

Know what you need. This could be a necessary addition if you plan on upgrading your scope without too many limitations.

Worked good

None

It worked exactly as I expected, perfectly.

Nothing.

This works exactly as you would expect. Allows you to change your scope attachment.

Well made! Was hoping I could find one that had the vertical stop pin, and this one does.

Nothing.

Needs a vertical stop pinto securely stop scope creep even though you might think using a picatinny mount will sufice. You still need it "anchored'' to the receiver with the vertical stop pin, which this mount has!

Despite being marketed as an 11mm-to-Weaver Adapter, the geometry is a perfect match for the 3/8" rail on a Crosman 1377 steel breech. I bought two of them with the expectation that the scope rings would end up being on opposite sides of the breech, but mounting just one rail to the breech with the overhanging section of the rail right above the breech worked perfectly for me. I have to roll a pellet in from the side when loading, but the overhang allows plenty of clearance for my finger, so loading pellets is still pretty easy. Having a full-length clamp means plenty of gripping surface, which I consider to be a considerable improvement over the precarious grip dovetail scope rings have in comparison. Installation was a breeze, and I like being able to use Weaver/Picatinny rings instead of the underwhelming dovetail rings I was using before. The rail is solidly built, and feels like it's worth a lot more than the $10 I paid. I'm very happy with this purchase.

For my purposes, it would have been nice if the clamp was on the other side of the rail. Normally, I'd just mount the rail in the opposite direction. However, it turns out that optimum positioning of my scope places the front scope mount directly above the loading port on the breech. This means I need the overhanging portion of the rail adapter sitting above the breech to allow enough clearance to load pellets. Since that puts the clamp on the right side, that puts the screw heads very close to the bolt handle. It hasn't negatively affected operation, but does make it possible for my finger to snag the front screw head when retracting the bolt. Another option would be to add another overhanging rail section to the other end. This is really a minor issue, and knowing about it in advance would not have affected my decision to purchase this rail. It would also be nice to have 3/8" compatibility mentioned in the product description, as I had to check the Q/A section before buying this.

As mentioned, I bought this with the hopes that it would fit a Crosman 1377 steel breech, and I was exactly what I needed. For anyone else looking to mount one on a 3/8" rail, make sure your breech has a flat top, as depending on the diameter of the breech, there does not appear to be enough clearance to allow the rail to clear a round breech top. A large diameter round breech might have enough clearance, but the narrow diameter breech of the Crosman 1377 probably would not have had enough clearance were it not for the flat top cut into the breech.

price

none

no