Page 2 - Air Venturi Intermount, Fits Benjamin Reviews

Works great! on the Benjamin

Nothing!

Good quality - adaptable to my situation. Have an older Crosman with a 7/17 OD barrel - bushed the 9/16 to 7/16 with a split brass bushing. Was able to get enough "squeeze" to securely mount. Used weaver style rings for 9-16x scope.

Nothing!

An exact fit for my air rifle. Able to put on any scope.

Nothing

You will need to raise the comb of your rifle somehow since the scope will be a bit high for a cheek weld on the stock.

Quality parts.

It is what is.

It was a little rough on the finish of Benjamin 392.

Solid mount

Nothing

Also fits crosman 180

Well designed and well built, high quality at a low price. Also, does not appear to put undue stress on the solder holding the breech to the air tube, only squeezes the breech. Also, I find the mount high enough to easily access the loading port.

If I had anything to change, I would double the width of the rear mount, and maybe machine extra mounting holes in the rail to allow for more mounting options.

I find this mount to be solid. I mounted the weaver rail on my 397 so it overhangs to the rear instead of the front. While clearance is a bit tight when opening the bolt, this mount allows me plenty of space to hold the gun securely while pumping, and also allows me to achieve proper eye relief on compact optics (I currently run a NC Star CQB scope). If you have a Benji pumper and want to add an optic, this "inter mount" is an excellent way to do it.

The mount clamps firmly to the barrels of my Tau-7 air pistols. The aluminum Weaver rail is very rigid and is numbered for reference when reinstalling sights and scopes. The rail can easily be drilled and cut to length as required. Two sizes of hex keys are provided. This system enables me to mount dot sights and scopes to a pistol that was designed to use only a open notch sight and post.

Drill additional holes for more options in placement of the clamps, including another one on the end,

Ensure that you can remove the front sight so you can slide the clamps on the barrel. The clamp body is one piece with a slot cut for tightening. Note the clamp specifications inside diameter range. Carefully measure your barrel diameter with a caliper to determine if the clamps will fit.

Just plain good, firm, 5-min. install.

High mount, so probably range-sensitive for such a non-flat (low velocity) rifle.

Easy to install. Seems sturdy.

Make the slot slightly deeper to ease tightening.

A solid, fairly well designed mounting system. Mounts to the receiver of the 392/397 rifles instead of the barrel. Weaver/picatinny style rail provides a much better platform for mounting rings than dovetails or fixed position base set-ups IMO.

Mill the weaver/picatinny rail so there are 1 or 2 slots behind the rear mounted intermount ring. Bolt handle lift and clearance are issues to be concerned with so only one slot may be gained.

This mount will position the scope very high above the barrel. Scope Obj size will be a factor to consider, but low rings will most likely be best for this application in most cases.

Very well made. Sturdy and fit perfect on my Sheridan C-9.

Nothing

Will not fit on older model Sheridan s.

everything sets up nice and sturdy and stays that way.

nothing.

due to the mounts and scope being attached right over the loading port, it can be quite challenging to load pellets without getting aggrevated.since I use my 392 for short range only, I prefer to just use the open sights.

Very good product. Fitted my Benjamin 397 very well.

I've had a Sheridan Silver Streak for years. I bought my first Sheridan about fifty years ago. The Silver Streak is my third Sheridan. I decided to scope my Sheridan because the open sights were getting a little difficult to pick out in the evening when the squirrels were raiding my bird feeder. This mount works very well and provides a solid base for scoping a Sheridan.

I think the manufacturer should make a set of rings integral with the Weaver rail so the scope mounting height would be lower. Drill a couple more holes in the rail so users could have some range in mounting locations. The scope mounting height is high enough that I have more of a chin weld than a cheek weld.

The basic design works very well. With a little bit of creativity this mount can be used on several pellet guns.

Split each base into 2 pcs. This would make it universal to more barrels.

I use this base (modified) and mount it to my Daisy 717 and izh 60/61, the receiver on the izh isn't molded evenly and the Daisy has no scope mounting provision. Now, I can mount anything-scope or red dot.

Best product made for air rifle. Very versatile and solid, can fit most scopes. Used this for my Benjamin 392.

Would like to have seen the iron sights under scope.

A very strong and secure system; easily installed on the Benjamin 390 series rifles.

Other than mount height, nothing. Well, I would love to see Air Venturi make another model to mount on a larger diameter. I would love to use this to mount a scope on my Sheridan FB-9 CO2 rifle, but it could not be opened enough to fit over the slightly larger receiver of this rifle. Make it and I will buy it.

I am not sure the design can be changed to allow a lower mount but as it is, it is pretty high. I used low rings and noticed the scope almost contacted the rail at the 32 mm objective. (I use a more rearward position of my scope than most folks.) If anyone else prefers to set their scope up this way, beware. Also, a larger objective may not work with low rings.

Fast, simple, secure, solid solution to mounting a scope onto a Benjamin 347/392.

Nothing

If you are looking to mount a scope on a CURRENT Benjamin pumper you don't have many options. This mount is miles ahead of the Crosman intermount solution since it attaches to the breech instead of bolting to the barrel which can add stress to the barrel and lead to damage.

This item will not work on all Benjamin Sheridan Multi-Pump Rifles. It will not work on the Benjamin Model 342.

Make a model that will work on the Benjamin Model 342.

Item did not work.

Make one that will work on the Benjamin Model 342.

This item will not work on the Benjamin Model 342.