Page 3 - Air Venturi Intermount, Fits Benjamin Reviews

This mount sets a rifle scope at the proper location for eye relief and aiming.

Would not change anything. Had no problems mounting this to my Benjamin 392.

It is good to finally get an appropriate mount for mounting a rifle scope to the 392.

Fits rifle rock solid. Comes with weaver rail. Not dovetail. Was forced to buy new scope and rings.

Offer dovetail mounting rail. Offer kit with scope package at special price. Sell just dovetail rail or weaver to dovetail adapter.

Fits great.

Well constructed, nice paint job.

I would like to see two more support holes in the rail. There are only two positions for this rail. Would be nice to have more variability.

This might be the only game in town for this mount for the Benjamin 397

good mount.

better quality control could be better. ring mount screws heads will strip w/ supplied allen wrench. use your own wrench.

works as advertised.

Reasonably solid scope mount for a rifle that was probably never really designed to take one.

Best mounting practices instructions would be helpful.

Be careful how you mount these. Due to the separate pieces in the kit, getting the rail properly centered is difficult. I had to work with mine excessively to overcome some cant at 25 yds (was actually driving me nuts for a while until I figured out what was up). Fortunately, I like to shoot. Now centered and zeroed, I am dropping nickle sized groups on the bull at 25 yards. Time to go hunting.

Makes it easy to mount a scope on my Benjamin 392.

Nothing

This mount does make it a bit of a challenge to load a pellet but once you get the hang of it it's smooth sailing.

Well made and easy to install

nothing

this is a must for sheriden and benjamin multi-pump rifles

easy to install, high quality machining and finish

nothing

It should go without saying but you need to use Loctite on the screws. I installed this on my 90's model Sheridan. I will never sell my Blue Streak! Now that it is scoped, I reach for it first for an afternoons plinking. I wish I had know about this years ago!

Very good mount. Rock solid. I paired it up with a Leapers 4x32 AO Mil-Dot scope. Looks great on my Benjamin Model 392.

The Intermount is a very well made, high quality mount. The problem is with the inability to get a consistent cheek weld on the stock. This creates a problem because the eye cannot be positioned in the same place shot to shot. In order to shoot the tightest groups possible from your gun, your eye needs to be positioned in the same place,(preferably in direct alignment with your target and crosshairs), every shot. If its a little high, low,left, or right of its position on the previous shot, the impact on the target will shift. This occurs even though the crosshairs are still on target. While the Benjamin is a fine gun worthy to be called a classic, it's stock was not designed for a scope mounted this high

I removed the Intermount without any modification to the stock on my Model 392, and put the scope on my Beeman Rr7. This allowed the scope to be mounted low on the gun, providing a solid cheek weld. The gun shoots crazy good. No problem with the scope. If your intentions are to modify your stock by adding a raised cheek piece, I feel the Inermount will tighten your guns groups.The Air Venturi Intermount is a high quality product that will provide a rock solid mount for the scope of your choice.

screws that mount plate have poor fitting allen wrench witch caused stripping problem.I am not pleased with the quality.

its nice and sturdy and it is built to last for ever..

nothing bothered me so it's fine.

it is a good scope rail mount and is nice and sturdy and it doesnt budge after you tighten it so it is worth it if you need it or you need a better one

Tough

Nothing

While the Blue Streak was plenty accurate with the Williams peep sight I had on it, these 67 year old eyes like the BSA 4x12 scope better. The factory mounts would not allow proper positioning of a rifle scope. It does require a little dexterity to get the pellets in the chamber. I should this a long time ago. Buy this one or your Sheridan or Benjamin pumper.

Everything !!!!!!!! It mounted on the gun SO EASY.

Nothing !!!!!!!!!!!

Its a bit high priced but WELL WORTH IT. I mounted it on a Sheridan 5mm blue streak air rifle. The way the gun is made it was hard to use the iron sights the proper way. This mount sets the scope higher up and you can mount the gun to your cheek and shoulder PERFECT because of the way its made.

Well made and a perfect fit on my old Crossman 1400.

Nothing--good product.

This is a great way to get a scope on old Crossman air rifles.

The rail was very easy to install. Mounting my scope rings on it was super easy and quick. The rail and mounts are well made and sturdy.

NONE

Buy one and see for your self!

Well made, easy to install, solid mount

Nothing

I have a Mac-1 Sheridan Blue Streak. It started out life with a Williams aperture sight but I had to have a scope. I mounted a scope with a base that attached with screws on the side of the breech. It soon failed. The Sheridan got relegated to the closet until I found this mount. This mount and a Leapers 4X32 have given new life to this rifle. My Sheridan shoots one hole ten shot groups at ten meters. I don't have to buy CO2 or scuba tanks, just grab a tin of pellets pump her up and shoot. And she's not even fussy about how I hold her.

good for the money....fit my crosman 1400

Fit well,looks good,does not move,fits tight

Include better fitting Allen wrench

Comes loose if you don't tighten it with a better Allen wrench

Fits like a glove on my 392 benji

Nothing

Rock solid well made very afforadable !!!

Fits perfectly on my FX-Revolution Rifle Barrel. I used it to mount a laser. In order to install, I had only to temporarily remove the Muzzle Chamber (semi-auto function), slide on the barrel clamps and reinstall the muzzle chamber. Use masking tape on both barrel and muzzle chamber to insure proper linear location and angular alignment.

Maybe a few more holes for adjustment. Perhaps a little on the expensive side.