Page 2 - Leapers 30mm Rings, Medium, 3/8" Reviews

Great product.

Nothing, works great

56mm scopes WILL REQUIRE shimming!

seem well built and machined properly

nothing

these mounts do what mounts do , and do it well,

I bought these to use a 30 mm red dot scope that I didn't want to have laying around because it's mount was too high on my pistol so I fitted this one and it worked perfect.

Nothing it helped me adapt a dead red dot that I almost gave up on.

There's lots of tinkering one can do even if you don't have A 30 MM SCOPE.

They do what they are supposed to. Nothing fancy, but the fit and finish are good. Seems like a reasonable price to fix the oddball situation of mounting a 30mm tube dot sight on a Crosman Raven which has a dovetail instead of weaver. My son is happy with the rifle now, so these rings did the trick- 30mm tube on dovetails...... All I needed!!!

Nothing......the product is nothing fancy, but seems well made. If you need to mount something with a 30mm tube on a rifle the has dovetails without a huge raise.....look no further.

Shipping was ok. Got here in about 4 days with the cheapest shipping option. Never had any problems wit Pyramyd Air, dont expect to in the future.

These are the perfect height on my marauder. Seem to be good solid rings.

nothing

Solid build quality; they always just work with little fuss.

Can't think of anything that wouldn't increase their cost?

Leapers/UTG are inexpensive, scope ring "Standard". No Whistles and Bells, but they just work.

Outstanding mount! Looks really nice and is super strong with super clamping force on the rail.

Nothing.

Be sure you consider the height. For example this medium is ideal for most things imo, and I much prefer the lower stance over a high mount. So far I have not needed a high for any gun, but I limit my scopes to 40AO and 44 like the UTG/Leapers with side parallax. Example; with a UTG 3-12x44AO (SCP3-U312AOIEW) I just measured and the largest part of the obj lens housing is 2.09", and the dust cap brings it to ~2.3". Mounted on a generic Crosman break barrel (Titan), with no shims, the dust cap has ~.024" clearance to the receiver. Without the cap there's .120" clearance. Something to think about if you need to shim the scope, so if needed you could sand a flat spot on the dust cap to gain room. Fyi; scopes, guns and mounts can vary with mfg changes over time etc., but at least you have some info to go on. The 1" version of these rings is ~.060" lower at scope center. Not sure why but fyi. The picture doesn't show a hole for a stop pin, but it does have one.

These rings are great. They're solid 4 bolt rings. The double screws for mounting the rings to the gun are a nice touch. They also allow my scope to be closer to the receiver. I think it makes for better shooting habits and allows the shooter to be more relaxed since there's no straining lifting your head to see thru the scope clearly.

Not sure if some shims could be added to square up the mount plates along the bottom to have the screw heads sit square on the plates for better engagement or not, but if something could be done for that, I think it would be a good improvement.

Make sure when you mount the scope that you follow the directions for screw tightening. It really does make a difference.

These rings look perfect for the scope I bought. Nice finish, beefy and look like they'll do the job of scope mounting just fine. I like the 4 bolt setup and having a 2 bolt setup for the dovetail is great. Bolts are beefy enough to thoroughly tighten sufficiently.

I wish there was a miniature picatiny rail system for this purpose instead of dovetailing.

As mentioned in other reviews, make sure you have the proper rings for the scope you want to mount including enough height (that's what the medium means in the description and I just learned that) for the scope to clear the receiver or barrel. Use a good thread locker for keeping the screws from backing out and keeping things tight for accuracy.

Works as advertised. Great but for the money.

Nothing

Pyramid Air is a great place to do business. I would highly recommend them to anyone.

The price is very reasonable. They work and mount to my marauder very well.

Nothing.

Just make sure you order the right mounts for your scope.

Good value for the money. Gives a solid lockup between scope and base.

nothing

nothing

What can I say, they work well, hold well,great price.

Nothing

These are some the the best mounts out there for the $$. They work well on my UTG 3-12X 44mm/30mm tube scope.

these work great on my Hatsan bt65 sb. hold tight and does not come lose. good quality scope rings

nothing.

good scope rings for the money!!!!

Excelent workmanship, solid fit, as good as it gets for dovetail mounts.

Shipping, and shiping options are terrible. Fed x is the worst. Paid for 3day service took 5 not including weekend. Then had to go down the road about a quarter mile to find package left on neighbors back porch. As for the rings, change nothing.

Perfect height for Marauder Gen. 2 with 50mm objective, and caps.

Sturdy, secure, well made, and inexpensive.

Perhaps better cushioning tape.

OK, these are just scope rings, but they are the first to hold a scope on my Gamo Whisper Fusion Pro .17cal. Combined with a Leapers scope the rifle is performing like I always thought it could.

If you're not sure which are the best mounts to buy with your scope, definitely consult with the great online chat help offered by Pyramid. They dialed me in.

Cost.

Nothing.

Buy the best you can afford..

Always clean and consistent the most accurate in my marauder.. My go to pellet!!

Nothin at all.

If you have a marauder you need to try these!!