Page 5 - Leapers 30mm Rings, Medium, 3/8" Reviews

Price. Decent quality.

Nothing at this price.

These rings are fantastic for so little money. Sure they aren't as straight and square as high end rings but for my purpose on a hunting rifle they work out fine. I like the medium size for my 50mm objective on a Marauder. It is just enough to clear the magazine and keep the objective down tight to the barrel. So close that I had to relieve some material from my flip up to install it. I like the leapers product. It isn't over priced. It works well enough for hunting and plinking with a PCP. If you want rings that are perfectly square and aligned you will pay a premium. For air gun use at no more than 100 yards I can't see being so critical. I can level the scope and if the windage is that far off center turn the rings around or send them back and get another set of rings. I have never found these to be so out of round or so off center that I couldn't use them. I still have plenty of windage adjustment either way and can zero all my scopes with plenty of adjustment to spare.

Good maching work and the lining in the rings keeps scope in place on my springer. Stop pin in rear ring is also a plus. A great set fo rings for the price.

Make all socket head cap screws used on these rings either metric or English.

The base clamp socket head cap screws are 5/32" and the ring's socket head cap screws are 3mm.

Heavy duty, I used these to mount the Hawke Sidewinder Tactical Sidewinder 6.5-20x42 on my Marauder .25. It's a heck of a setup and I shoot sub MOA out to 100 yds with the combo. The mounts have a lining instead of pure aluminum so they don't scratch scopes.

nothing

The mediums work well with the Hawke/Marauder mount. The magazine has about 1/8" clearance.

These are the highest quality mounts for the money.

Some of the allen head screws on these mouts are sized between metric and inch sizes.

Great mount. Great price. Perfect mounts for my 56mm scope and Marauder rifle.

Nothing.

Can't beat the price for the Quality, there real solid and nicely finished and the built in stop works great on my BSA Polaris

Nothing

The extra hardware is nice touch in the event you were to loose a part and the tools to install the rings are real handy.

Right height for good cheek weld mounting Leapers 6-24X56 scope to a Marauder. Cheap flip-up objective lens cover needs a little sanding off the bottom to fit, but scope will be right height.

Good fit, hold tight good set of mounts

none

Nice mount

Tough. Price. Nice finish.

Nothing (for this price).

I used the review from Robert to learn that these scope mounts will accomodate a Leaper 4-16x 56mm SWAT scope on a Benjamin Marauder. And he was spot on! These mounts make that scope snug to the barrel, and the scope fits, even with the sunshade attached. The mounts also give enough clearance for the 10 shot magazine to easily fit into the chamber. At this height, you can't attach the large lens cover. If you want that on, you'll need the high mounts. But, for guys like me, who take a lot of close shots on varmints, the lower-than-low scope mounting is perfect. The color of the mounts is a perfect match to the gun and the scope. The photo on Pyramyd make the mounts look a bit grey, but they are actually matte black. When you are mounting the scope, be sure to tighten each screw around the tube a little at a time; rotating through the screws. This will ensure that the pressure is even. Just go little by little, until all the screws are snug. These mounts are the EXACT same as the Leapers Accushot mounts, and Pyramyd may send you a Leapers package, rather than the UTG package - just so you know.

Well made and nicely finished. Solid and accurate grip on 3/8” or 11mm rail.

Nothing.

Excellent mounts. They accommodate the Leapers Accushot 4-16x56AO scope on the Benjamin Marauder with 1/16” clearance above the barrel. This small clearance is not enough to make use of the objective lens cover.

this set is very well made and it includes spare screws and all wrenches needed.used to mount a Centerpoint quick aim on my Viper Express and they worked out perfect the pin stop fit right in the scope rail just great.all in all a very good set for the money,I would order again without delay.

Nothing

if you own a Viper Express and are looking for a good sighting duo the Centerpoint Quick Aim and these mounts are a good pair.

Overall quality of these rings is second to none! The ring set comes with extra screws, extra recoil stop pin, and all necessary allen wrenches are included. There simply is not a better value in an airgun/rifle ring available on the market anywhere, at any price.

Nothing.

All steel parts including the wrenches come lightly oiled in the package to prevent any chance of rust until they reach the customer.