Page 9 - Leapers Accushot 1-Pc Mount w/1" Reviews

Can tightly attach to TX200HC dovetail and with the recoil pin in place the substantial recoil will not move the mount. I tried BKLs without recoil pin and could not secure the scope. Rifle, BL4200 scope, and these mounts will still make weight for NRA sanctioned sporter air rifle class. My combo weighs 10#6oz. Extra screws nice ( see below ). Excellent value for the price.

One of the ring screws would not take the Allen wrench so had to go to the extra backup screw provided. If this is a common problem better quality control in order. Hopefully PA will provide feedbacl to Leapers.

The TX200 generates significant recoil and mounts with a recoil pin required. The PA sales rep said she always recommends this Leapers mount for this rifle. I bought rifle and BKL mounts originally online. Wish I had known this rec as would have saved me some significant postage.

once I had it modified it was an easy installation

I have an older model rws 34 and the grooves in the reciever are only 3 inches long so I had a machinest cut the front of the clamping part milled to 2 7/8 inches and it fit perfect.

great bargain for great product. I did have to shim under the rear scope ring because the RWS 34 shot too low. have shot it over 100 times with no scope movement.

Nothing. They even send the allen wrenches and extra screws!!

Well worth the money. and looks sharp too!!!

Overall this is a very nice mount, a quality piece. I like that I can tighten the scope base, and know it will stay in place. Three screws is better than two, or the single one of an individual scope mount.

Through no fault of this mount I had to shim the rear ring because of barrel droop. That made me wish for height adjustment. but otherwise I am quite pleased

These rings are of the "high mount" design. That can be a problem if you have barrel droop ( I have a break-barrel springer). This might be an especially sensitive concern if you're mounting a scope with 40mm objective lens like I did. Otherwise, shimming aside, no regrets. A very good buy.

hey if it's made by LEAPERS/UTG, then it's gonna be worth it!!!! VERY SOLID CONSTRUCTION and the best part.... once you have it INSTALLED PROPERLY, you NEVER have to worry about your scope moving!!!! 3 clamp bolts are a GREAT FEATURE and the tape inside is the BEES KNEES!!!!

nothing

don't be FOOLED by imitations.....LEAPERS has their ACT TOGETHER!!!!

The mount stays in place, and rings keep scope tight and zeroed.

Nothing.

The large numbers of positive reviews is no mistake!

good solid mount

more length for adjustable scopes

only lightly snug screws until eye relief is set, "stickum" in the rings grabs the tube as you tighten

Very solid piece and my scope hasn't budged a bit and a couple hundred rounds, its perfect

nothing

Buy it! Its great and cheap.

very solid construction. Holding true after 200 shots on my magnum springer.

nothing

throw away the cheap stock mounts and put one of these on immediately after taking your rifle out of the box.

Well made very strong and work on just about anything.

nothing

these are a good value for the money and they work I have them on several of my AG's

4 bolt rings, pin stop and 3 thru screws ! this mount is SOLID ! even came with additional pin stop screw. mounted on a magnum springer and hasn't budged a bit !

absolutely....nothing !

this is a high quality piece. i would be happy with it at twice the price! if your scope keeps moving, this IS THE CURE ! and cheap too!

Low price. Very strong. Easy to mount.

A stop pin would be nice. Other than that it's just right.

If your an air gunner that is having problems with your scope moving due to the recoil of magnum guns, then this mount should solve your problems. My venturi gas ram Gamo Whisper was killing scopes. I was always losing zero until I used this mount. It's held my Bushnel scope rock solid ever since and looks good too while doing it.

A really beefy mount. Three massive bolts that hold the base to the dovetails. No cheap stamped ring mounts. Once tightened, it isn't going anywhere.

Nothing at all

Don't look any further. Buy it.

Everything

Nothing

This is an excellent scope base and ring set. The price is right and the quality is there, overall an excellent buy.

Mounted easily onto a 30/06 double rifle with 11mm rail. The double gun crowd has been using these with excellent results. Wouldn't expect such strength from such an inexpensive mount.

Offer the mount in Medium and Low heights.

Locktite, Locktite, Locktite.

I replaced a high dollar RWS-0565 mount on my RWS 52 springer with this mount. The RWS mount would not stay tight. I liked the rugged oversize dovetail screws on this mount. It sighted in nice. So far it is staying tight. I have only shot about 30 shots. But, the RWS mount would not stay tight on my RWS 52. This gun really jumps when you shoot. And...this mount is 1/5 the price of the mount I am throwing in the trash. Perhaps it is because pyramyd checks the junk on the market and does not sell junk. I consider my old high priced mount junk. This is a very simple solid mount so far!

I have no advise. My experience level is a new air gun shooter. There were little to no instructions with the item. That could be improved. I would pay more to have thread locker included along with a book about scope mount.

This is a very well built mount for the price...or any price. And so far it is working on a very harsh gun, my RWS 52.

Seems like a good solid mount. I will need to shoot for a longer time to see if every thing stays tight.

There are little to no instructions sent with the mount.

I replaced a mount that did not work on my RWS-52 spriger. I was trying to use a scope on the RWS 0595 2 piece adjustable c-mount. This is an expesive very adjustable mount system. It was never tight on my gun. It would not stay tight on my gun.. I have tried the above listed Leepers one piece mount for one round of shooting. So far.....it is staying in place. My RWS-52 is a test bed for recoil. It moves a lot when shot. So far this mount is ok. Time will tell. I liked the diameter of the mount screws and everything seemed more than expected for the price. You need to keep in mind that the mount I had that failed was a high dollar failure. So....I am impressed with this mount!. Looks like a lot for the money even if it cost much more than what it sells for!....

everything

nothing

solid construction,works well on all my rifles.

Very solid, for an inexpensive mount it is surprisingly well made, well worth the money. The "4 screw" mounting is a plus on spring based guns, if mounted correctly, your scope will not slip.

Can't think of a thing, unless making it all smooth and pretty was an option ;>)

Very rugged and probably overkill for its purpose. I preferred the 1 piece model for perhaps better alignment. Easy to install. I installed on a Hammerli Nova rifle with a Leapers scope and obtained remarkable accuracy.

Nothing.

Great value. I don't see any reason to pay more for a different product.