Page 7 - UTG 11mm (3/8") Dovetail to Reviews

Simple, effective, solid, cheap and very low profile scope mount adapter. This is the perfect solution to an otherwise impossible mounting conversion.

Nothing.

Work great clamp down tight.

These are well made and very useful.

Nothing.

Once installed you forget they are there. They do raise the site slightly, which can be an advantage sometimes.

Easy to use,light weight.

Nothing.

Nothing.

Easy installation. Used on different red dot sights with no issues. Holds position with no movement. Low profile keeps optics low. Best of all grabs the dovetail on Crosman steel breeches and holds.

Nothing

This is a perfect adapter for airgunners and 22 owners alike! Doesn't add much additional height and really secures the scope mounts to the rifle. Easy to install. Very slick product! I highly recommend these.

Simple design

Less movement of the two halves in relation to each other.

This mount seems well made, but it did not work well for me using just one mount to fit to a crosman dovetail. There was some sideways movement that would allow the mount to become detached. I believe it would be more stable using both mounts if your mounting situations permits it.

UTG makes good value stuff. There ins't many choices when it comes to .22 size scope rings so you can use what ever stand pictanny rings you have with these adapters. All metal and simple design works best.

Does what it says it will.

It's caused my bipod to pop off my Airforce Talon SS a few times.

This adapter allows me to use any picatinny rings or sights on my dovetail Crosman TR77NPS.

nada

You simply can't go wrong with UTG/Leapers.

I was afraid that the adapter would add height to my scope, it didn't. It's fit was all you could hope for. I teach machine tool and I don't know they can sell it at this price. Love it.

nothing

solid on pcp hadn't tried it on a springer.

super easy to install.

great product ,if you need an adapter these are for you.

These adapters have been the perfect solution for a couple of scope mounting projects I have done lately. I mounted 3x9 Bugbuster on my Hatsan Dominator carbine and could not have done it without them.

nothing

I have used these on a couple of springers and have had no problems at all.

Easy to use, works with all Weaver & picatinny rings I've tried, makes moving/switching scopes on 11mm/ 3/8" tipoff mount guns easy, they stay with the rings, all at an excellent price point.

too bad they weren't available sooner

They do not work on tip-off mounts on some (older?) guns with a significantly curved top (ie. my Nylon 66 won't accept them)

Quick way to mount a weaver to 11mm.

Smoother action. Better fit.

Tends to make anything I mount with it noticeably off center. One of them sticks badly, but can get to work.

These work just as I though they would Great product

Nothing

This is a very simple and inexpensive solution to the problem of attaching a Weaver/Picatinny mount to a dovetail. It has the added advantage of keeping the sight low to the barrel, barely raising it at all. I attached a Weaver based reflex sight onto a Crosman 2300KT with long receiver, and it couldn't have been easier nor more secure. There are tiny set screws that can go into any hole along the dovetail to stop recoil slip. Additionally the tops are grooved so the sight's recoil bar or screw grabs the adaptor.

Make the dovetail grips a little sharper so they grip better, and possibly give more receiver clearance for the same reason, as the receivers are often rounded rather than flat. Factory lube the slide pins to prevent binding on installation.

If not using the anti-recoil set screws, they must be completely removed to allow proper installation. Previous reviews suggesting lubrication of the slide pins must be followed, and a very good lubricant should be used, very light lubes don't help. Without lubricating the slide pins, they easily bind and you only think the sight is tight and can easily come off. Lubrication allows the parts to move smoothly, applying even and firm mounting pressure.

I used these to mount a massive Millett 6-25x56mm scope on my Mrod. They have held up so far over 100 shots. This is a scope that I originally bought for my .50BMG rifle, so it's a far larger/heavier scope than you would normally subject these adapters to.

Shorten the set screws so they don't stick up beyond flats of the adapters.

This part does what its intended for...Its a cheap way out..I wouldnt mount something big and heavy with it but for a small scope or red dot it works well ..Just tighten it up evenly and i never recomend using Lock tight..That stuff is for cars..

Maby make them a little stronger..

I used them on one of my Hatsans,It worked great for me..

it works pretty much like it should

better instructions The fit into the actual scope rings is not what I would have liked. The toloerances on either these bases or the scope rings (or both) could be much better. In the end, it may not matter since I have this on a P-rod and it will not really take a beating.