Test plug lets you pump up and check for leaks.
Roll over image to zoom in
2-year limited warranty
List Price $229.99 Save $30.00 (13%)
Earn 200 Bullseye Bucks
Air Venturi G6 hand pump
Please note: The Air Venturi G6 hand pump has a female quick-disconnect on the end of the hose. If your gun has a proprietary fitting, you must adapt it to work with the female quick-disconnect before fitting it to this pump's hose. Refer to AV-00033 or AV-00044M.
No need to spend a fortune on pressurizing equipment for your PCP gun!
This economical Air Venturi G6 hand pump is so much more convenient to carry into the field than a bulky tank. It's great for filling and topping off your air gun's reservoir.
There are 5 rebuild kits included with your pump. You don't have to ship it to a repair station to replace seals, springs and other minor things that tend to wear out with regular use. User-maintenance is easy and keeps your pump in good shape for many years.
Have you ever seen another hand pump that can pressurize a gun up to 4,500 psi? This one can! The guns that usually require a carbon fiber tank to pressurize them can now be filled with a hand pump. One pump for ALL your PCP guns. How convenient is that?!
Create an online review and share your thoughts with other customers
Things I liked: Good solid pump fills my pcp's faster then the Benjamin I have. the length of hose over the short one on the Benjamin is nice making fill up easier for me.
Things I would have changed: SS Foster female quick connect which only lasted three fill ups before the ball bearings that fell out which PA replaced within a few days of receiving my request about a replacement good work PA
Things I liked: Can't wax too poetic about an air pump, but I will say this: the G6 is simple to put together, does what it's supposed to do and does it well. I'm using it for a 300 bar fill-up on at Ataman AP16 with nary a problem.
Things I would have changed: The instructions are simple. Perhaps too simple. The G6 comes with a bag filled with components such as o-rings. As I've since learned online, they're replacement parts. Wasn't sure if there were needed for the initial set up or not. But there's nothing saying where the replacement parts should go even if there is a problem.
What others should know: When you think everything is tightened down...tighten it some more. (With the exception of the pressure gauge.) Had some initial air leaks that even a quarter turn resolved.
Things I liked: Easy to use. Solid construction. Works 100 times better than Benjamin pump
Things I would have changed: Nothing
What others should know: Works fast. Great for a marauder and if you pace yourself an air force condor
Can this pump be used to fill hatsan at44 ?
Yes. You'd need Air Venturi Male Quick-Disconnect, 1/8"... for the fill probe that comes with the gun
Where is the Intake on this pump? The Benjamin, airforce, and Hill all have accessible intake ports near the bottom. In short, Can this pump be boosted? (Not asking if I should, only if I CAN)
Used this pump for the first time today to fill Sam Yang Recluse. It took about 400-500 pumps to get from 1,000psi to about 2,500psi ? Did not hear any air leak from pump or gun. This seems like a lot work. I am 180 lbs and in good shape. Am I doing something wrong or is this normal ? I hate to think I have to go through this for a few decent shots !
Sounds like a problem to me
$259.99 $229.99$199.99 $255.00$179.99 $224.95$212.95