Gamo Bone Collector Cone Pellet Trap & 100 Paper Targets

Cheap, easy to assemble, practical and portable. It does its job.

Nothing other than I slightly thicker steel would be very nice.

Do not shoot at it without a sight in scope. Hitting in odd parts will dent it. Do not use high velocity penetrating pellets such as Gamo Lethals, PBA Armour, or any pellet designed for superb penetration while shooting them with a 1200+ fps air rifles.

Inexpensive, easy to assemble and mount.

The steel is way too thin to handle decently powered airguns. I put about 25 rounds into it from 50 feet with my RWS 350 magnum in .22 with 14.3 grain pellets (< 900 fps) and it took a real beating--paint flecked off from the outside of the trap, and the flap at the back (the trap part) was hammered all the way back to the back wall. This is advertised for < 1000 fps, but I would say < 700 to be safe, and probably with .177 only.

Soundly made and works well.

This little trap needs to be larger. When ordering be sure to understand the actual size. I am not saying you shouldn't order and use this trap, but I am saying it is smaller than expected.

Will do its job IF you stay within fps/force stipulations...and even a little more.

Easy assembly. Designed to hang on a screw or stand on its own. 100 quality targets. Inexpensive.

Gauge of steel. My hatsan 85 sniper (1000 fps) demolished this traps deflector and began denting out the back within 50 shots from 15 yards. It's rated for a minimum distance of 10 yards. This is an ideal trap only for lower powered air guns. Excellent otherwise for indoor outdoor use. Traps pellets well when components were all intact.

Light powered air guns only for the minimum distance for use. Guns under 800 fps probably.

This is a great little pellet trap that is well made. I like how the targets,that are made of heavy paper and slip right into the slots. I also like how the trap catches all the pellets and paper and easy to dump into the trash can.

nothing

Great for indoor shooting.
I would recommend this trap to everyone. For under $20.00 you get 100 heavy paper targets and a well made metal trap.

This is a nice pellet trap for a good price in my view. The targets slide nicely into the slots, and the pellets are neatly captured and easy to dump out. You can even hang the trap on a nail or screw with the slot in the back for this purpose. Works great for .177 air rifles. The face of the trap is about 5.5 inches square, so you'll of course need a safe backstop for errant shots. The pack of 100 target cards is also very useful.

Nothing that I can think of.

good pellet trap and targets

change it so you can shoot PBA pellets in it.

lead pellets only

100 targets from crossman are of good quality and for me are capable of providing good target for at least 50 shots, 10 for bullseye and then I start taking out the numbers on vertical and horizontal axies.

The steel on this pellet trap should be made AT LEAST twice as thick better 3 times, because my HW97K .22 made hole in the rear of this product in about 20 shots with RWS superdomes (fps ~700), but hey it says in big fat letters on the pallet trap MADE IN CHINA so would expect that much

This product is not durable at all 20 shots with .22 cal ~15 grain pellets made a hole in the rear part of this product. after 250 shots the hole is as wide as 1'' basiclly all the rear part behind the bullseye is a hole. you can fix this by getting 2'' plank and placing it behind this pallet trap.