Consider the following similar item(s):
| |||||||||||||||||||
Gamo Scope Stop, Rubber Bumper, 11mm Dovetail by Gamoinformation | |||||||||||||||||||
| |||||||||||||||||||
Gamo Scope Stop, Rubber Bumper, 11mm Dovetail by Gamoassociated tags | |||||||||||||||||||
Gamo Scope Stop, Rubber Bumper, 11mm Dovetail by Gamoreviews summary
Things I would have changed:The entire design; I had to replace the threaded inserts with a bolt and nut assembly to mak it work, otherwise it will come off after a few shots. The bolt passes completely through the stop body and makes it really super tight in the grooves What others should know:As stated above
Things I would have changed:I can't argue with success, so it looks as if the deceivingly chintzy construction actually is a plus. What others should know:You will want to be certain that the yellow nylon bumper is pressed firmly against the rear of your scope mount or ring you intend to keep in place. Also, you probably will be unable to make this work unless you already have a recess for the vertical stop pin, which I consider the essential element to make this work. Comments
*** UPDATE***
I'm sorry to say that this stop couldn't handle even 100 shots through my CFX before it bent and twisted to the point that I had to discard it. I went for the vastly superior Beeman stop found here, and it has held up easily to well over 200 shots and counting.
Things I would have changed:The rubber bumper did not do me any good. My mounts are see through and the stop only touches them with the corners, but it still works. What others should know:Worth the investment with a springer.
|
Recently viewed items
1-year limited warranty
Other products by Gamo
| Customer Support | Shopping Services | Confident Shopping |
|---|---|---|
Copyright © 1999-2011 Pyramyd Air. All Rights Reserved.
All other designated trademarks, copyrights, and brands are the property of their respective owners.