does not include shipping and tax
1-year limited warranty
List Price $45.99 Save $8.00 (17%)
Want it delivered 08-05-2014?
Order it in the next 8 hr and 56 min and choose Next Day Air Morning at checkout. Details
Average Customer Review4.0 (48 reviews)
Create an online reviewand share your thoughts with other customers
Things I liked:Chamber oil, spring cylinder oil with needle applicator. At first look seems like nice maintenance package with two sample tins of pellets.
Things I would have changed:Change cleaning rod to a one piece coated rod. Shorten the jag--It is much too long to use with small patches required for .177 caliber or .22 barrels.
What others should know:The cleaning rod is not usable without risking the damaging the barrel of your air rifle. When assembled the joints do not align properly. Each section has a sharp edge that protrudes from the adjoining section. This sharp edge will damage the bore of the barrel if it comes in contact with barrel when cleaning. RWS makes a lot to good products--this cleaning rod and jag are not . In addition, the jag is aluminum but it is much too long for small patches. I will not use either the sectional rod or the jag--very disappointing. I ordered a Dewey single piece coated rod with brass jag. I will not risk damaging the barrel of my new Beeman R9 with the RWS cleaning rod and jag.
Things I liked:I am a fair minded person who tries to be honest in my product commentary which in this case is the RWS Rifle Shooters Cleaning kit for .177 caliber air rifles that I recently purchased at PyramidAir. I would not recommend this item for the following reasons. #1- The Rod assembly does not accept standard attachments as its end is a male thread. #2- The kit comes with one .177 caliber attachment which is a bore brush. There is no patch Jag. Included in the kit is one .22 caliber attachment which is a patch Jag with a male thread and is a larger diameter than that of the Rod assembly. So not only is the thread pitch incorrect on this .22 caliber attachment but it also has a male end that cannot mate with the rod as the rod also has a male threaded end.#3- The kit is expensive as well as poorly engineered. Not certain why the kit comes with only one .177 caliber bore brush attachment and no patch Jag as well as one .22 caliber attachment that does not even fit the rod? I cannot even find additional RWS attachments that fit the rods male threaded end so the kit is essentially useless right out of the box with no way to make it useful.
Things I would have changed:I would make the kit make sense and have more than one .177 caliber attachment. Also I would make the attachments have a male threaded end and the rod a female receptacle.
What others should know:If one wishes to purchase an item that is grossly inadequate, inaccurately advertised and poorly engineered than this is the one. I seriously doubt this review will ever see the light of day as it is blatantly honest and factual.I deserve a refund but having opened the item that is impossible. I have since purchased a different .177 caliber cleaning kit that comes with all the attachments required to properly maintain my air Rifle that I purchased from PyramidAir. I am extreme;y satisfied with that Air Rifle by the way and highly recommend it to my fellow air gunners!
Things I liked:The oil, needle and pellets.
Things I would have changed:Different thread configuration of rod sections. As mentioned in other reviews the threaded ends are not female configuration making it more difficult to find and use attachments other than ones supplied. My fault for not looking closer at the set up.
What others should know:Purchased 6/15/2013 with rifle and a threaded rod tip in a section broke off in the brush when inserting into barrel the 2nd used. Yes, the barrel was cocked and rod was not bent at any diverse angle, it just snapped. May just find another as it is too much of a hassle/cost to return to Umarex.
Got a question? Got an answer?
Sign Into Your Account
Sign Into Your Existing Account