Call 888-262-4867 toll-free and we'll answer your questions. Hassle-free online buying. Order by noon Eastern & we ship the same day (weekends & holidays excluded). Some orders excluded.
So, are you looking for a fresh take on airguns?
Some new information, perhaps?
Check out our daily report!
Monday thru Friday find new topics about air guns, BB guns and airsoft guns. Ask your questions by clicking on the comments link at the bottom of each post.
$25 eBillme Rebate! Receive $25 by mail on orders of $100 and over when you checkout with eBillme. Valid for first use of eBillme only. Offer valid from October 9, 2009, to January 5, 2010.
Download the rebate form here.
Same day shipping exempt
This item doesn't qualify for Same Day Shipping Exclusions include but are not limited to international shipments, haz-mat products, special order items, orders with out-of-stock items, orders needing customer verification for processing, orders for technical inspection or product installation.
By Michael from USA on 2009-10-19 21:58:46 - See all my reviewsAdd comment to this review
Things I liked:Great for a wider choice of scopes and a more secure mounting of scope.than 11mm type mounts.Great price and very well made . Things I would have changed:Nothing' great piece of equip. What others should know:No it,s a graet standard mount thats worth every cent.
By Al from USA on 2009-09-21 10:56:55 - See all my reviewsAdd comment to this review
Things I liked:Fit perfectly and it's solid. Things I would have changed:Nothing. It's great as it is! What others should know:If you have to adapt a weaver scope mount to an 11mm mount this is what you need.
By JEFFREY from USA on 2009-08-08 14:46:41 - See all my reviewsAdd comment to this review
Things I liked:Good price. Sturdy construction. Things I would have changed:NOTHING What others should know:This is what you need to mount the LEAPERS BUG BUSTER SCOPES. The 4x or 6x or the 3-9x32. I got the 6x and the 3-9 BUG BUSTERS mounted on my MM tuned B26's. Mount it backwards to get the proper eye relief on
... Read MoreThings I liked:Good price. Sturdy construction. Things I would have changed:NOTHING What others should know:This is what you need to mount the LEAPERS BUG BUSTER SCOPES. The 4x or 6x or the 3-9x32. I got the 6x and the 3-9 BUG BUSTERS mounted on my MM tuned B26's. Mount it backwards to get the proper eye relief on these very short scopes, works like a charm everytime.
By Doc from USA on 2009-07-28 14:04:31 - See all my reviewsAdd comment to this review
Things I liked:Rock solid, heavy duty Allen set screws. Once your scope is locked into place it is not going anywhere. Things I would have changed:Nothing What others should know:This is the one piece of equipment an airgunner has to have if he is thinking about mounting a scope of any sort.
By Tim from USA on 2009-07-04 20:36:19 - See all my reviewsAdd comment to this review
Things I liked:This mount is soild! Much more than expected for the price. Things I would have changed:Nothing What others should know:Highly recommended
By Jeremy from USA on 2009-05-05 23:34:56 - See all my reviewsAdd comment to this review
Things I liked:Good, tight fit with stop screw. Cut-away groove down middle of rail. Worked perfectly for my Nightstalker TK to add the third Weaver rail. Also allowed better placement and eye-relief for my scope. Things I would have changed:Nothing. What others should know:Works great, good buy.
By Donald from USA on 2009-04-19 10:22:22 - See all my reviewsAdd comment to this review
Things I liked:It sits square, mounts up solid, and fits a 3/8" dovetail. Things I would have changed:I would make the extended portion of the mount just a bit thicker, to minimize any chance of flex if you use the last slot to mount a scope ring. What others should know:The extended portion of the mount is thinner
... Read MoreThings I liked:It sits square, mounts up solid, and fits a 3/8" dovetail. Things I would have changed:I would make the extended portion of the mount just a bit thicker, to minimize any chance of flex if you use the last slot to mount a scope ring. What others should know:The extended portion of the mount is thinner than I would like. If you push down on it with your thumb, it can flex a thousanth of an inch or so. If you use the two extreme slots, you will have a 3.125" ring center. One thousanth of an inch flex with these centers will give you an impact deviation of 0.3" at 25 yards. This might make a difference to the precision airgunners, but not me. As long as you don't use the extended portion, it is ROCK SOLID ANYWAY.
By Leonard from USA on 2009-02-24 13:35:48 - See all my reviewsAdd comment to this review
Things I liked:The mount is well-made, leaving little to be desired in a straight 11mm to weaver type of mount Things I would have changed:I would like a mount that compensates for the droop in the break barrel pellet rifles, like the Leaper mounts for the RWS rifles. What others should know:This is easy to mount and I
... Read MoreThings I liked:The mount is well-made, leaving little to be desired in a straight 11mm to weaver type of mount Things I would have changed:I would like a mount that compensates for the droop in the break barrel pellet rifles, like the Leaper mounts for the RWS rifles. What others should know:This is easy to mount and I especially liked the fact that the rear section could be used to put the scope back further.... closer to the eye.
By John from USA on 2009-02-23 10:14:41 - See all my reviewsAdd comment to this review
Things I liked:Fits fine, has a stop pin, and does what it advertised. Great value for the money. Things I would have changed:Add a third bracket screw and a better quality finish. Though it has two screws that hold secure, a third would add more security. The finish is okay, when you stare at the sides of the rails, you can see
... Read MoreThings I liked:Fits fine, has a stop pin, and does what it advertised. Great value for the money. Things I would have changed:Add a third bracket screw and a better quality finish. Though it has two screws that hold secure, a third would add more security. The finish is okay, when you stare at the sides of the rails, you can see the finish isn't great. What others should know:
By speakski from USA on 2009-02-23 07:45:28 - See all my reviewsAdd comment to this review
Things I liked:Price and the quality was very good. mounts prefect on a IZH 94. comes with extra shoes. Things I would have changed:Not a darn thing it is very simple and it works. What others should know:
By Christian from USA on 2009-01-27 14:13:10 - See all my reviewsAdd comment to this review
Things I liked:Very solid design, super steady mount Things I would have changed:Nothing What others should know: I was able to mount this on top of the 459-MT mounts on a Crosman 1377 in order to mount a more potent scope. That may sound like overkill for a pump pistol but that's neither here nor there. What is important
... Read MoreThings I liked:Very solid design, super steady mount Things I would have changed:Nothing What others should know: I was able to mount this on top of the 459-MT mounts on a Crosman 1377 in order to mount a more potent scope. That may sound like overkill for a pump pistol but that's neither here nor there. What is important is that this is a VERY solid mount for Weaver accessories.
By theron from USA on 2008-12-23 10:52:40 - See all my reviewsAdd comment to this review
Things I liked:i was very pleased with the mount. everything fit great. very satisfied with the product.
theron linton Things I would have changed:nothing What others should know:
By Charles from USA on 2008-12-20 12:20:00 - See all my reviewsAdd comment to this review
Things I liked:Excellent mount. I needed to mount a Bug Buster scope on an IZH-61 and this allowed that to happen. I couldn't have done it without it. This is a good sturdy mount and with the base length plus the two screws I have not had one micron of scope creep. Things I would have changed:Nothing What others should know:This
... Read MoreThings I liked:Excellent mount. I needed to mount a Bug Buster scope on an IZH-61 and this allowed that to happen. I couldn't have done it without it. This is a good sturdy mount and with the base length plus the two screws I have not had one micron of scope creep. Things I would have changed:Nothing What others should know:This mount allows a scope to be more forward on the gun but it could also be reversed if your scope is too far away and make it closer to you. On my IZH-61 the rear screw is actually hanging over the rear of the gun rail but it doesn't matter because of the long base and the two screws together still hold the base really tight.
By Paul from USA on 2008-11-18 10:03:30 - See all my reviewsAdd comment to this review
Things I liked:This mount woked well for a short, folding stock air rifle, I wanted to put a red dot sight on. It did what I needed and then some. Things I would have changed:I would have put a center screw on the clamp, for recoil resistance What others should know:
By Thomas from USA on 2008-11-11 07:17:27 - See all my reviewsAdd comment to this review
Things I liked:Great mount for rifles with a short dove-tail groove cut into the action. Especially older guns. Sturdy and well consructed. Things I would have changed:Maybe a third screw in the middle for extra holding power. Perhaps a second stop pin on the other end of the rail so it could be turned backwards for a closer eye-relief
... Read MoreThings I liked:Great mount for rifles with a short dove-tail groove cut into the action. Especially older guns. Sturdy and well consructed. Things I would have changed:Maybe a third screw in the middle for extra holding power. Perhaps a second stop pin on the other end of the rail so it could be turned backwards for a closer eye-relief. What others should know:Not sure, but the locking clamp might be reversible to accomadate a 3/8" dove-tail. I like the fact that the Pic/Weav rail remains at about the 100 mm length like most other mounts,...just the clamp is shorter.
