Date: 19/3/2024 7:57

PY-A-4148

UTG 11mm (3/8") Dovetail to Weaver Adapter, 2pcs

Main Product Rating 4.54.5 (159 reviews)
UTG 11mm (3/8") Dovetail to Weaver Adapter, 2pcs

UTG 11mm (3/8"), Image 1UTG 11mm (3/8"), Image 2UTG 11mm (3/8"), Image 3UTG 11mm (3/8"), Image 4UTG 11mm (3/8"), Image 5

See 2 customer imagesShare your images

$13.97

List Price $14.97Save $1.00(6%)
  • Lifetime limited warranty

  • 60 day money back guarantee
  • Estimate Shipping

Add to Compare
Add to Wish list

Earn 14 Bullseye Bucks

Please Note:

Updated selection based on available products

Add to Cart

In-stock


Sold & shipped by Pyramyd AIR


See other products by Leapers > UTG

Item details

Sold & shipped by Pyramyd AIR


Price

$13.97


  • 11mm  (3/8") Dovetail to Weaver Adapter
  • Insert into Weaver or Picatinny rings so they'll fit the smaller 3/8" or 11mm rails and dovetails often found on airguns and rimfire guns
  • 1" long
  • .93" wide
  • .24" high
  • .18 oz
  • 2 pieces

  • If your air gun or rimfire gun has a scope dovetail that measures either 11mm or 3/8" (approx. 9.5mm), you can use this lightweight aluminum adapter to attach your Weaver and Picatinny rings or mount to your smaller 11mm and 3/8" dovetails.

    This clever device clips into the base of your Weaver or Picatinny mount (both 1-pc mounts and 2-pc mounts), thereby reducing the size of the clamping jaws on the mount! A very easy way to make your mounts more useful for a wider range of guns. In fact, you can leave your optics in the mounts and move them from gun to gun! You'll still have to resight the gun after attaching the scope, but you won't have to reset or retighten the scope in the mount.

In stock


Item Code: MNT-DT2PW01 [PY-A-4148]

Average Customer Review

Rating 4.54.5 (159 reviews)
5 star
4 star
3 star
2 star
1 star
122 reviews
24 reviews
4 reviews
5 reviews
4 reviews

Create an online review

Customer images

Sort by Date: Newest–Oldest

Rating 5.05.0 5.0

Rating 5.05.0 5.0

Verified Purchase

Things I liked:

I have lots of Weaver type rings, and these adapters allow me to use those rings on my Dovetail airgun rails. What can I say, they are convenient and solve a practical problem.

Things I would have changed:

Nothing. They are easy to use.

Rating 2.02.0 2.0

Rating 2.02.0 2.0

Verified Purchase

Things I liked:

Offset stop pin allows some fore-back positioning of mounts by flipping adapter around. Otherwise see additional comments.

Things I would have changed:

Tighter tolerance fit of alignment pins. Larger diameter and longer stop pin.

What others should know:

Do not work well for me with dovetails cut into round top receiver. Alignment pins are a loose/sloppy fit in adapter halves. On round top receiver narrow half lacks support below and rotates inward when tightened reducing engagement with dovetail groove. As result when tightened to spec or subsequently even tighter scope and mount in either case will pop off rifle from springer recoil or if bumped. With support from below on flat topped dovetail receiver the adapters probably would be fine. Also note stop pin is very small diameter and short. Pin adjusts to either minimally engage with receiver or minimally thread into adapter, not long enough to engage both well.

Rating 4.04.0 4.0

Rating 5.05.0 5.0

Verified Purchase

Things I liked:

Worked well on grooved receiver

Things I would have changed:

If you are not mechanically adept, it may take you a while to figure out how to use them. Instructions would be nice

What others should know:

See above. While mine worked fine, I'm not sure they are installed according to the design

+ Load More

Got a question or answer?
Log in to participate

  • A Vargas from USA asked:

    Will this fit with a Leapers UTG Accushot SWAT 4-16x44 AO, Mil-Dot IR, 30mm Tube mounted onto a Benjamin Marauder pistol ?

    • Adam from USA answered:

      Yes.

  • bill from USA asked:

    Will these work on the Diana Chaser to mount a red dot sight

    • Adam from USA answered:

      Yes, but you will need to remove the rear sight.

  • Bill from USA asked:

    Do these work with the crosman steel breech or not? Some say they do- others say they dont!

    + Load More

    Compatible with UTG 11mm (3/8") Dovetail to Weaver Adapter, 2pcs

    Buy With Confidence

    TEST Get FREE shipping on qualifying orders! Any order $150+ with a shipping address in the contiguous US will receive the option for free ground shipping on items sold & shipped by Pyramyd AIR during checkout. Certain restrictions apply.

    Free shipping may not be combined with a coupon unless stated otherwise.

    View Shipping Info

    Want More?

    Join Our Email List for News and Deals!

    123 text Join the Pyramyd AIR mailing list: Our e-mails are filled with new products, deals, sneak peeks, tips and tricks, contests and more - sign up today!

    Text JOIN to 91256 and get $10 OFF Your Next $50+ Order!

    * By providing your number above, you agree to receive recurring autodialed marketing text msgs (e.g. cart reminders) to the mobile number used at opt-in from Pyramyd AIR on 91256. Reply with birthday MM/DD/YYYY to verify legal age of 18+ in order to receive texts. Consent is not a condition of purchase. Msg frequency may vary. Msg & data rates may apply. Reply HELP for help and STOP to cancel. See Terms and Conditions & Privacy Policy.