Tech Force S2-1 Air Pistol

This little pistol is differently a project gun mine was so weak the pellet wouldn't come out the barrel.I disassembled the gun and cleaned everything up and re lubed it, now I crony it at 361 F.P.S. and the trigger is much better.

For $20.00 you can't expect much.

You will have to work on this gun so you better know how to disassemble a spring powered gun.I found it fun to take apart and clean up and but back together. This is never going to be very accurate,but what can you expect for $20.00.

At this time nothing is good about this pistol. Out of the box it would not even develop enough pressure to get the pellet out of the barrel.I will keep it as an inexpensive learning gun to work on. I will tear it completely down to see how spring guns work and try to get it working. For 20 dollars it is worth that.

Be sure they work before leaving the factory. Quality control is diffidently lacking here.

Don't expect much here. The cost of returning may cost more than the pistol. However if your new to air gunning like I am and want to know as much as possible about spring guns, then this is a good one to learn on. Have fun and enjoy our sport.

There isnt much about this gun that i like...Its solid meaning steal and wood...Looks good to.

For 20 bucks there isnt much more to change.It has no power at all..I shoot pellets at my trap from 10 feet and they bounce back at me...

For 20 bucks its worth buying this.Maby some can take it apart and make it work better.I know the high velocity pellets work better.I wouldnt send it back for the money..Good gun for the collection...

Its made solid and looks kinda cool.

The internal spring assembly is junk.No way is this thing shooting over 100 fps..

When i first got this the thing was so weak the pellets wouldnt evern make it outta the end of the barrel.Its junk and it would be more of a hassel sending it back than trashing it but i am gonna take it appart and clean and oil it and see what happens...Waste of 20 bucks..

I reviewed this gun earlier but after just coming in from my home range I have to say, after about 200 shots this gun actually gets better! Just out of curiosity I set up cans at 35'. To my surprise the pellets were nailing the target and blowing right through! Yes you have to "play" with it a little but after that this gun is a lot of fun to shoot and pretty accurate. Great for practice. The heavier trigger pull makes you concentrate better on the shot. When you shoot other pistols you'll notice an improvement in your shooting skills. It's worth the price. I'll probably get another one while they're still available!

Not much for this price.

It's an easy gun to work with if you REALLY like to shoot. Also great indoor gun when it's raining outside!

What it is, is a cheap $20 pistol from china. all metal and wood. No way will this shoot close to 400fps, closer to 200fps. Good for shooting cans at 15 feet.

Put a PETA sticker on it, since for pest control you would do better throwing the pistol then shooting it.

Out of box to dirty to shoot pellets, needs to be cleaned inside and out. Easy to tear apart. Think of this as learning tool for cleaning and tuning.

Gun has a nice hefty feel. Rifled barrel is nice. All wood and metal construction. Good for close quarter and indoor practice.

A lighter trigger pull and safety would be nice. It also could have a better rear sight.

If you don't mind tinkering you'll love this pistol. It's not perfect but it's not that bad. I removed all screws and reset them with some Loctite. This was a big help. Next thing you want to do is add some RWS chamber oil right away. After about 40 rounds, velocity increased. Out the box pellets wouldn't leave the barrel! Also clean the barrel with a little chamber lube. Best to use lightweight pellets for better velocity. Swab a dab of white paint on the front sight. After these tweaks, a very decent 25' practice pistol for the price!

I like that there is no plastic all wood and steel construction really heavy trigger pull but with the rifled barrel its accurate good pistol good value

Solid, low cost all metal and wood gun. It's weight is realistic and it sounds good when fired, if you don't mind a loud airgun. Rifled barrel very accurate once sights are adjusted.

Sharp edge on trigger should be addresed. Add a safety. The handle finish is a bit rough but a little fine sandpaper is all that's needed.

This is a solid airgun. The fasteners were loose when pulled from the box but nothing a screwdriver won't take care of. You will have to clean the protective coating from the metal. I used wd-40 but gun solvent will be fine. Also, use caution because there is no safety. The sights will need to be adjusted but use caution not to strip the screws. Loosen one screw and tighten the other to adjust.

This is a great gun for the money

wish it would hold more than 1 bb