Roll over image to zoom in
Item Code: ME177/MP [PY-P-436]
Create an online review and share your thoughts with other customers
Things I liked: Not one thing
Things I would have changed: Take these off the market!! They are dangerous!!!
What others should know: I thought with the design of the pellet head that these pellets would get a good seal and grab the rifleing. But that was not the case! I shot them at rest from 30 yards with a tuned gamo bonecollector with gas piston. I've got about a thousand rounds through this gun and its always been great. And as with most, some pellets shoot better than others. But these pellets are absolute garbage! The first sign of trouble was when i went to load the first pellet and it just fell into the barrel. And all the others did the same. My first 10 rounds were all over the place. And I'm talking about foot and a half groups! My back board is a 2'x2' sheet of plywood with an 8" target in the center and half the pellets didn't even hit the board! At this point I thought the gun might be messed up. Checked over the gun and check the torque on the rings and base and everything was fine. So I figured id try a few more rounds. The third pellet I shot made a horrible crack and pieces of led came out of the chamber. The pellet had actually sheared the skirt right off and the head of the pellet was lodged in the end of the barrel! Fortunately I knew something was wrong and didn't try to shoot another. I ended up throwing the rest in the trash. I also noticed they are made in Mexico. So I would imagine the material and workmanship are cheap. Bottom line is do not waste you money or your saftey on these pellets!!
Things I liked: Consistant accuracy and very hard hitting.
Things I would have changed: Nothing, these were one of my first choices
What others should know: Buy them, you won't be disappointed.
Things I liked: Just checking back in the problem i had with these pellets,was due to a air rifle malfunction-and opperator oversight of it,but these are a good buy.will buy these again,the problem was due to air-rifle being to new ,not broken-in and finaly settling down with air pressure being constant,not all over the place.Sorry about that ,I didnt mean to put them down.
Things I would have changed: I would still fill the point up alttle more.