Air Venturi K Valve PCP Reviews

Price is good, like the push valve, no knobs to twist, just push the button and the pressure bleeds out after you're done charging your gun!

Make the gauge a bit bigger and also reference PSI, not just Bar.

Works like a charm, I was pumping up my Benjamin Marauder after every 30 shots and am SOOOO glad I finally bought a tank and this to fill up my rifle !!

nothing

quality control

Arrived with defective gauge.

Excellent product, fit and finish is perfect, large pressure gauge and the on/off knob is the same the knob on the scuba tank, pressure relief is a push button and the micro hose saves on air wasted. This unit is priced right too.

I would have liked to see a female quick fill Foster fitting supplied with the set.

The regulator I received has a button to release the air after filling. It works much better than the units which have a release knob that you have to turn to release the air.

The gage is only in bars - should be in pounds also.

The gage is easy to read and the bleed valve does not leak.

Nothing

Easy to use and fast.

nothing

Good back up

Works just well, nothing to complain there

I would've changed the manometer, it's very low quality. But if you have one in your rifle it doesn't matter or you can change it if you want

The materials aren't the best out there but it works just fine, you don't need any more for scuba tanks, it's a good purchase over all!

Works great and can read the gauge without glasses.

nothing

Make sure you know how long of a hose you need.

All metal construction.

The fill hose could be a larger guage, seems somewhat small.

This product is well worth your money.

This attachment makes it very easy to charge your PCP gun.

The gauge dial face was warped when I received it. It would not let the needle go past 1200psi. A better quality gauge would be recommended.

PA support offered to repair the gauge if I would return it to them via their freight company. We didn't have a local office for their freight company here. They didn't offer another way nor would they just send a replacement gauge. The response from PA was that they would have to test the unit before returning it to me. This obviously wasn't done prior to shipping it the 1st time.

Decent size handle and gage.

Hose could be a little heavier duty and longer.

My first one that cam teh hose was bent and had to send back. They did the excahnge with no questions but did take a week to get teh new one sadly.

This is a well made and finished valve with an easy to read gauge. It has the same look and feel of the K valve on my scuba tank. The price was less than cheaper made sets.

nothing

You need to buy what ever fitting your air gun needs.

Does exactly what it should. The gauge is accurate

For the price it should come with the fitting you need for the gun you have instead of trying to figure it out after the fact.

This is a quality piece of equipment and will make filling those bigbore air guns easy. Is good for smaller calibers, be careful and watch your gauges and everything will be fine. If you want a "scuba" quality gage this fits the bill nicely. Great quality.

It would be nice to have instructions. I'm a respiratory therapist so I knew how to attach the charging set to the tank.

Be sure and tighten probe with wrenches. Finger tight will not work and an air leak will result when probe and fill hose adaptor are not completely mated.

The construction and finish is very high quality. Has a nice quality feel to it

Change pressure gauge to one that reads in PSI instead of BAR

The gauge units are BAR and not PSI which is what the gun shows and my high pressure Scuba gauge shows. I created a little p-touch label with a conversion table for quick reference. Here are the values if interested: 3000 PSI = 206 BAR 2800 PSI = 193 BAR 2000 PSI = 137 BAR 1800 PSI = 124 BAR

Scuba fitting was well built.

Hose leaks, way too short.

Returned due to defective and too short hose.

the good grade of metal work. works ok for the price.

the gauge- its plastic cover pops out treat with care.

beware this charger comes with NO instructions. i found out the hard way the bleed valve screw- if you take it out all the way a steel BB inside will fall out its small & hard to find i sweated the search.

the metalwork is grade A the pressure gauge is not the same but its funtional, dont drop it, its plastic.the rest is very well made scuba quality equpment. good deal for the price. im happy with the product.

pyramyd has to package it better mine came with the gauge not functional because of damage during shipment it was only wraped in buble wrap when a heavy item like this one needs a small box of its own

mine seal to the tank very well and the knob is very precise.

Fills my air rifle as advertised. I found the guage to be accurate to what the manometer on my rifle says.

i would like both BAR AND Psi readings. This guage only reads in BAR. Not really all that big a deal but would be nice.

Leaks a bit at high pressure.. can hear it hissing out from where it attaches to the Yolk, just in front of where it attaches to the tank. I expect some teflon tape will cure that. leak is slow and still fills my rifle.

Makes a PCP very easy to fill.

A gauge that would tell you pressure in the scuba tank would be great.