Date: 21/11/2017 18:17
0

Air Venturi Scuba Tank Yoke K-Valve Adapter & Hose Assembly, 1/8 BSPP Threads reviews - page 1

Add to Cart

In-stock

Create an online review   and share your thoughts with other customers

The most helpful favorable review

1 of 1 people found the following review helpful:

Overall rating:5.0

Value for money:5.0

By Michael from USA on 2012-06-27 17:11:47

Things I liked: easy to put on the k-valve and self explanatory.

Things I would have changed: The pressure gauge goes up to 6,000 psi but the max on the adapter is 3,000 psi. Some people may get confused and put too much pressure through it.

What others should know: If your getting this for a marauder you need to get another adapter to fit the air resovior.

The most helpful critical review

0 of 0 people found the following review helpful:

Overall rating:1.0

Value for money:2.0

By Thomas from USA on 2011-04-03 14:27:06

Things I liked: Nice design, poorly executed

Things I would have changed: All conections leaked badly. I was able to put teflon tape on the pressure guage and tighten it. To tighten the hose it must be attached to a SCUBA tank (no pressure) The bleed screw still leaks like a sieve, but I can fill the pistol even with the leak.

What others should know: I called to get a new bleed screw and was told they didn't have any and no idea when they would come in. It was suggested that I tighten it with Vice Grips to lessen the leaking

Sort by:
  • 12345 Next
  • Showitems
  • 3.0 3.0

    3.0 3.0

    By Gary from USA on 2017-04-14
    See all my reviews
    Was this review helpful?
    0.00 ratings

    Verified Purchase

    Things I liked: Convenient if you buy the right item.

    Things I would have changed: Small gage. Need to make sure you have the correct adapter for your gun. If you have a Benjamin Marauder PCP, you will need the Air Venturi Scuba Tank Yoke K-Valve Adapter & Hose, with Quick Disconnect or you will have to purchase the Foster quick-disconnect female to 1/8" BSPP male adapter (part number PY-A-4926) which is an extra $19.99 plus S&H. They do not tell you about when you are ordering the adapter.

    What others should know: If you are going to use a scuba tank and to fill a Benjamin Marauder PCP, YOU WILL NEED the Air Venturi Foster quick-disconnect female to 1/8" BSPP male adapter

     
  • 5.0 5.0

    5.0 5.0

    By Richard from USA on 2017-02-04
    See all my reviews
    Was this review helpful?
    0.00 ratings

    Verified Purchase

    Things I liked: Hey it works just like it says it should, 80.00 and you have to have them to fill your gun gauge matches the gauge on the gun.

    What others should know: If you have PCP and scuba tank this is good.

     
  • 4.0 4.0

    5.0 5.0

    By Grantland from USA on 2017-01-29
    See all my reviews
    Was this review helpful?
    0.00 ratings

    Verified Purchase

    Things I liked: Everything except the tiny air gauge

    Things I would have changed: This would be a perfect deal if the gauge had a bigger 3000 PSI dial face to help in acquiring an accurate fill pressure......

    What others should know: Very easy to use, small diameter hose doesn't waste air when releasing..... this seems to be the best adapter available for the price......

     
  • 2.0 2.0

    2.0 2.0

    By Cary from USA on 2017-01-24
    See all my reviews
    Was this review helpful?
    0.00 ratings

    Verified Purchase

    Things I liked: The construction seems solid enough although machining looked a bit rough.

    Things I would have changed: Quick connect is painted and flaking. Bits of black stuff in the packaging. Could get into gun if not careful. Gauge is useless. The product pictures don't show the gauge in sufficient detail or I would not have ordered. The gauge is so small and the graduations so coarse that there is no way to get a precise fill with it. If the product photos included a close up of the gauge it would have saved me $12 in return postage.

    What others should know: I never used this unit and sent it back so I can't comment on the function of the clamps and valves. I sent it back because the gauge is so small. I consider the gauge on my Hill pump to be the smallest useful size. It has marks in 5 bar increments and is large enough to interpolate to at least 1 bar. The Air Venturi yoke has marks in 35 bar (500psi) increments and they are so close together that you would be lucky to get a fill to within 10 bar of your goal. If you are shooting a regulated gun that may be good enough. For most Air Arms guns, you need better resolution to ensure you are accurately within the sweet spot.

     
  • 4.0 4.0

    5.0 5.0

    By David from USA on 2016-12-08
    See all my reviews
    Was this review helpful?
    0.00 ratings

    Verified Purchase

    Things I liked: Easy to use.

    Things I would have changed: Make the pressure gauge a little bigger so my 70 year old eyes could see it better.

    What others should know: I am using this on a Benjamin Maximus. The longer hose makes it much easier to use than the short Benjamin.

  • 5.0 5.0

    5.0 5.0

    By Carl from USA on 2016-12-04
    See all my reviews
    Was this review helpful?
    0.00 ratings

    Verified Purchase

    Things I liked: Best price for a quality adapter. Knobs turn smooth. Hose is long enough when attached to my scuba tank to shoot from a bench while tethered.

    Things I would have changed: I'd like to see the gauge in both PSI and BAR graduations.

     
  • 5.0 5.0

    5.0 5.0

    By James from USA on 2016-11-15
    See all my reviews
    Was this review helpful?
    1.01 rating

    Verified Purchase

    Things I liked: A great hose assembly with the proper adapter.

    Things I would have changed: Nothing.

    What others should know: This item is very necessary.

     
  • 4.0 4.0

    5.0 5.0

    By Sam from USA on 2016-10-28
    See all my reviews
    Was this review helpful?
    1.01 rating

    Verified Purchase

    Things I liked: Ease of operation is outstanding.

    Things I would have changed: Maybe a little longer hose.

     
  • 5.0 5.0

    5.0 5.0

    By Greg from USA on 2016-10-20
    See all my reviews
    Was this review helpful?
    0.00 ratings

    Verified Purchase

    Things I liked: Very nice adapter must have for PCP guns. Another high quality tool for my Marauder. Easy to use.

    Things I would have changed: Nothing

    What others should know: Works just as it was intended. Great No worries about leaks. Should last a long time. A little pricey but you get what you pay for. I don't mind.

     
  • 5.0 5.0

    4.0 4.0

    By Barny from USA on 2016-04-11
    See all my reviews
    Was this review helpful?
    0.00 ratings

    Verified Purchase

    Things I liked: Works great, well made (in USA), small ID hose, strain relief on hose ends

    Things I would have changed: Bleed screw too hard to seal closed.

     
  • 5.0 5.0

    5.0 5.0

    By Darin from USA on 2016-03-07
    See all my reviews
    Was this review helpful?
    0.00 ratings

    Verified Purchase

    Things I liked: Easy to use

    Things I would have changed: nothing

    What others should know: Great for use. Like the small diameter line for less air loss in bleed off process.

     
  • 5.0 5.0

    5.0 5.0

    By James from USA on 2016-01-20
    See all my reviews
    Was this review helpful?
    0.00 ratings

    Things I liked: I ordered the Air Venturi Scuba Tank Adapter to fill my Hatsan AT44 and it works perfectly. It is designed to fit a K valve on a scuba tank. Before I used it for the first time, I measured the pressure in my scuba tank using my diving regulator. When I attached the adapter to the tank, the pressure reading was identical. The adapter is well made and should give many ears of service.

    Things I would have changed: The first stage on my scuba regulators have a dust cap to protect it when it is not in use. (It fits in where you would attach the first stage to the K-valve and is designed to keep dust from getting into the first state.) I would like to see one added to this adapter. The local dive shop gave me one to use.

    What others should know: Tips from scuba diving since the mid-1980s: Buy a couple of extra tank o-rings - they are cheap and tend to be lost or damaged at the most inopportune time. (Murphy's Law: You are 25 miles out in the Gulf and go to attach the first stage to the K-valve and find that the tank o-ring is missing.) I was taught that you turn the first stage pressure gauge down and away from you when turning on the air. I've never seen a pressure gauge blow but the I have heard stories of them blowing. Always make sure your tank is secure, and preferably laying down when not in use - they are top heavy and easy to tip over.

     
  • 5.0 5.0

    5.0 5.0

    By David from USA on 2016-01-15
    See all my reviews
    Was this review helpful?
    0.00 ratings

    Things I liked: Connected to the tank and worked as expected.

    Things I would have changed: Nothing.

     
  • 5.0 5.0

    5.0 5.0

    By David from USA on 2016-01-04
    See all my reviews
    Was this review helpful?
    0.00 ratings

    Things I liked: Attached easily to the Scuba tank and my Marauder (with the female foster quick-disconnect). The 2 ft hose is a plus.

     
  • 5.0 5.0

    5.0 5.0

    By David from USA on 2015-10-10
    See all my reviews
    Was this review helpful?
    0.00 ratings

    Things I liked: It works exactly as expected.

    Things I would have changed: Nothing everything is perfect!

    What others should know: K valve is a normal hook up on SCUBA (underwater tank). SCBA are the tanks used by Firefighters. They have different tank valves.

     
  • 5.0 5.0

    5.0 5.0

    By Richard from USA on 2015-08-17
    See all my reviews
    Was this review helpful?
    0.00 ratings

    Things I liked: Easy to use. Like the length of the hose.

    Things I would have changed: Nothing

    What others should know: Can be used for other PCP rifles by getting their connectors with 1/8 BSPP threads.

     
  • 5.0 5.0

    5.0 5.0

    By Ronald from USA on 2015-07-03
    See all my reviews
    Was this review helpful?
    0.00 ratings

    Things I liked: works as advertised

    Things I would have changed: none

     
  • 5.0 5.0

    5.0 5.0

    By Tim from USA on 2015-06-08
    See all my reviews
    Was this review helpful?
    0.00 ratings

    Things I liked: no tools required to install. gauge reading matches reading on my disco. hose is long enough to use easily.

    Things I would have changed: nothing

     
  • 5.0 5.0

    4.0 4.0

    By RONALD from USA on 2015-06-06
    See all my reviews
    Was this review helpful?
    0.00 ratings

    Things I liked: EASY TO INSTALL AND WORKS LIKE A CHARM. THE LONGER HOSE IS A REAL ASSET, ESPECIALLY WHEN DOING THIS BY YOURSELF W/O A GUN REST.

    Things I would have changed: NOTHING FOR NOW.

    What others should know: BEFORE INVESTING IN THIS,MAKE SURE YOU HAVE AT LEAST ONE PLACE THAT CAN FILL TO 3000 PSI AND HOPEFULLY TO 4500 OR BETTER. IF YOU HAVE THAT, YOU CAN MAKE A DECISION TO GET THE SCUBA TANK WITH THIS ADAPTER, ETC OR YOU CAN DOUBLE THE DOLLARS FOR THIS ADAPTER, SCUBA TANK AND HAND PUMP (IF YOU HAVE ONE) AND GET THE CARBON FIBER TANK THAT FILLS TO 4500 PSI. (ABOUT $700) THIS IS PROBABLY WHAT I WILL DO IN THE LONG RUN.

     
  • 4.0 4.0

    4.0 4.0

    By Eliseo from USA on 2015-01-10
    See all my reviews
    Was this review helpful?
    4.01 rating

    Things I liked: Easy to use and compact.

    Things I would have changed: I think it should come with your choice of end fitting.

     
  • 12345 Next
Navigation