UTG Low-Profile Dragon Claw Clamp-on Reviews

The bipod fit perfect on the gas tube of my M1A Scout rifle. It stayed snug firing 50 rounds and continues to be sturdy product.

Exactly what I wanted! I had it out of the box and mounted on my rifle in 5 minutes. Just what I needed to steady my shooting squirrels ! Thyanks for a great and inexpensive piece of equipment.

N/A

N /A

EASY TO INSTALL

NOTHING

I PURCHASED THIS FOR MY WINCHESTER M14. IT INSTALLED WITHIN 30 SECONDS AND TIGHTENED INTO PLACE WITH A THUMBSCREW. IT HOLDS THE WEAPON NICE AND STEADY. IT IS VERY DURABLE AND CAN TAKE A FAIR AMOUNT OF ABUSE.

it's all metal it's black has a very good grip on the gun barrel so you can move it to what ever point you desire with a easy tighten knot screw no tool's need it put it on take it off easy and fast as long as the gun barrel size is right to fit bi-pod on.

nothing compare to other bi-pod's in the same price range

just made sure of your gun barrel size is with in the aloud size's check out spec.'s and your good to go

Rugged

Better thumbscrews for legs

Happy days

Easy to install and is a quality made product

It folds up when you not using it.Stabilizes the barrel for the perfect shot.

Very High quality, all metal except plastic skids. Worked very well, folds up nicely

The barrel clamp worked great, however, even when fully tightened it will tend to allow the barrel to turn inside of it a bit. Not a problem when shooting but if you leave the rifle sitting in the bipod and walk away the rifle will often roll to the side. However, my rifle is pretty heavy and has a big scope on it.

nice design. well built. I bought it for use on my 850 air magnum. I removed it because the 8 shot group at 10 yards opened up to three times as big as shooting from a bag rest. I thought maybe it was me and maybe it is but after four magazines I decided it was the bipod. removed it and the tight group came back. will try it on another rifle later.

nothing.

Small, Compact

The padding that hold the barrel in place need a better adhesive and comes off easy.

A good Bipod for the value!

The barrel clamp design is easy to install. The Bipod is light weight, but at the same time solid and strong.

Other reviews stated they had trouble with the feet slipping on smooth surfaces. I used a piece of 1" x 1/8" self adhesive rubber strip and put a piece on each foot pad to over come this problem. Maybe UTG could put regular round rubber cups on the bipod instead of the flat metal foot, or place a non slip coating on the base of the foot.

Ig the barrel clamp is loose when tightened, just add a piece of thin auto self adhesive rubber around the inside of the clamp and this will solve your problem.

very easy to set up and install, put a piece of rubber between the barrel and clamp to make it a little tighter. installed on a Benjamin nitro titan 22 cal. works great

This is a pretty nice little bipod for a very good price! Adjustable leg height and foldable legs. Also, the ability to mount to any barrel is very nice, able to be changed from gun to gun if needed.

Possibly have some sort of a way to maybe have a cushioned mount, or a spring system, or something that would make this usable on spring airguns and not effect accuracy.

I used this on my break barrels and it causes accuracy to be inconsistent, due to the unique recoil of the spring piston. I'm not complaining, I'm just making the statement. The bipod did its job very well, its just not very well compatible with a spring airgun.

That it works on my springer.

Rubber feet

The wheel can be tightened by inserting an allen wrench in the holes.

Very nice bipod, makes you much much more accurate. Clamp is very sturdy, mounted it to my TR77 Fury II Blackout break barrel rifle. Looks very good as well. Can't go wrong especially for the price! The legs are easy to use.

Absolutely NOTHING!

Makes any rifle look better, and more accurate. Rest shots that are away from the bench are made much easier, and mounted to a break barrel is no problem.

Very durable. Easy operation.

Fit more sizes. I have a Gamo SoCom rifle and the bipod clamp is too small for it.

Nice and easy way to have a bipod.

Great value for the price. Easy to attach. Excellent quality. I use this on my Crossman 1077. I highly recommend you get one these if you are in the market for a bipod. Wonderful Service thru Pyramyd Air.

NOTHING

Add a small band of rubber or Velcro before clamping the Bipod to protect the barrel and make everything more solid.

Well made. I like the fact that the leg lock into position. Fits my nitro venom dusk .177 perfectly

Nothing

People were complaining that the feet didn't have rubber on them, go to a hardware store and by a can of plastic dip and spray a rubber coating onto them. Worked great for me

This bipod looks awesome on my black-stock Stoeger X50 with Leapers 40mm scope. It is very helpful at reducing fatigue on longer ambush hunts. If properly positioned, the legs do not get in the way when cocking and the bipod does not seem to add too much weight when taking a shot. This bipod can be moved from one rifle to another fairly quickly.

Not sure if I like the spring-action leg extension. Its kind of cool to show off and pop the legs out at the range, but you have to remember to dampen the action (and sound) with your hand when hunting.

I have not actually attempted a shot while supporting a rifle on a bipod, but I suspect doing so with a steel springer will cause an erratic shot due to the hard double recoil. Learn and practice the artillery hold to be an effective hunter with a steel spring rifle.

Easy to use, light weight, quality materials. Legs fold up easy when not in use.

I think they could have found a better way to get the legs to extend in length. The lower tension knobs are hard to turn and then the legs come flying down if your not careful.

Good product for most break barrel air rifles when you don't have a sling mount or rail to work with. The clamp-on feature is nice but I won't anticipate switching this from gun to gun quickly. To securely attach the bipod I really had to tighten it down which makes it impossible to open the clamp until you release some pressure.

Excellent build quality, easy to attach/remove, fits a wide range of rifles, all at an attractive and extremely reasonable price.

As others have mentioned, no-slip rubber on the feet would be nice, as well as a rubber strip on the top half of the barrel clamp. I applied rubber to these areas myself, and now this bipod leaves nothing to be desired.

It is very likely that this bipod will fit your rifle. Upon attaching, this bipod feels very sturdy and does not wobble in the slightest.