Create an online review and share your thoughts with other customers
5.0 5.0
4.0 4.0
By Spider from USA on 2011-11-01 19:06:15
The size is great for break barrel airguns. It works well with square or rectangle patches. The soft brass material is easy to work with.
Things I would have changed:Would be nice for it to have a smoother finish. The edges are cut sharp. I had to hone down the edges with 600grit an 1000grit wet emory to smooth it out.
What others should know:This works great if you can swab and brush out a barrel from breech to muzzle without the bold interfearing (such as a break barrel). Will be more difficult to work with a barrel that has only a chamber space to work with (such as a PCP Pistol or rifle) unless you remove the barrel. For restrictive barrel/chamber space I use a Jag and circle patches.
1.0 1.0
1.0 1.0
By rick from USA on 2020-08-06 10:58:50
Nothing
Things I would have changed:Smaller size so it will fit in .177 bore
What others should know:May work with .20 bore, but I could not even get it started into my .177 with a patch in place. Cutting the patches to a smaller size had no effect. One size does not always fit all.
Sort by: | Date
| Helpfulness
| Rating
|
---|
Filer by: |
---|
5.0 5.0
5.0 5.0
The best
5.0 5.0
5.0 5.0
Great product
5.0 5.0
5.0 5.0
This is just what I needed to cleaning my pistols the other one was plastic
Things I would have changed:Nothing
5.0 5.0
5.0 5.0
I was happy to find this as I am discovering these cleaning rod tips are getting hard to find, most retail stores are stocking jags in the various sizes but loops like this, not so much. Work perfect on my Dewey rod, but beware, because of the thread size, will not fit on all rods.
Things I would have changed:None
What others should know:I thought the thread size was pretty universal on these, but be aware, this type of loop comes in two thread sizes. This one is a 5-40 and fits most higher quality cleaning rods. These tips can also be found in retail stores with a smaller thread size, so know what will fit on your cleaning rod before buying.
5.0 5.0
3.0 3.0
IT WORKS
5.0 5.0
5.0 5.0
Solidly constructed, a very well made accessory.
Things I would have changed:Nothing.
What others should know:Much better than the nylon, plastic loops that you see. It's brass and made to last
5.0 5.0
5.0 5.0
just the little tool for the job. What else can you say about a loop? Right size, built sturdy and hefty, far better than the plastic ones.
Things I would have changed:Everything seems to be proper.
What others should know:Nothing else, just a lifetime purchase unless you loose it.
5.0 5.0
5.0 5.0
The craftsmanship.
Things I would have changed:Not a thing.
What others should know:Make sure you have all your maintenance tools purchased to minimise down time later on. This will likely preclude your postponing your gun care. Make sure you keep logs on what you have done for each airgun so no process is left undone! Buy a chronograph! That will not only tell you how fast, it may also indicate possible barrel debris.
4.0 4.0
3.0 3.0
Very soild, well-made product. Threads in perfectly and does its job.
Things I would have changed:For delecate barrels I would use a plastic unit. My steel barrel was fine using this brass jig but it did scrape at times.
What others should know:You have to have one of these. Steel barrels this is fine but anything else I would use a plastic jig.
5.0 5.0
5.0 5.0
Great for using cleaning cloths...am very satisfied with the products..
5.0 5.0
4.0 4.0
The size is great for break barrel airguns. It works well with square or rectangle patches. The soft brass material is easy to work with.
Things I would have changed:Would be nice for it to have a smoother finish. The edges are cut sharp. I had to hone down the edges with 600grit an 1000grit wet emory to smooth it out.
What others should know:This works great if you can swab and brush out a barrel from breech to muzzle without the bold interfearing (such as a break barrel). Will be more difficult to work with a barrel that has only a chamber space to work with (such as a PCP Pistol or rifle) unless you remove the barrel. For restrictive barrel/chamber space I use a Jag and circle patches.
5.0 5.0
5.0 5.0
Small and easy to use. Made well with good quality brass.
Things I would have changed:Nothing
What others should know:Just be sure not to cut the patch too big or you will have a hard time getting it through the barrel.
1.0 1.0
1.0 1.0
Nothing.
Things I would have changed:I needs a longer neck to work for .177 caliber. There is no room for the patch between the loop and the barrel of the gun.
What others should know:You have to put the rod with empty loop through the barrel, insert the patch, and then pull the rod and patch back out. It may work better for .22 caliber.
5.0 5.0
5.0 5.0
Gets the job done... small and easy to use...
Things I would have changed:...
What others should know:It is extremely small, so be careful were you place it....... I first bought it to use it on my Gamo Whisper VH .177 caliber, but it did not fit inside the barrel, so I ended using it on my Talon SS .22 cailber... But it works just fine!!!
Buy With Confidence
Get FREE shipping on qualifying orders! Any order $150+ with a shipping address in the contiguous US will receive the option for free ground shipping on items sold & shipped by Pyramyd AIR during checkout. Certain restrictions apply.
Free shipping may not be combined with a coupon unless stated otherwise.
View Shipping Info
We work hard to get all orders placed by 12 pm EST out the door within 24 hours on weekdays
because we know how excited you are to receive your order.
Weekends and holiday shipping times will vary.
During busy holidays, we step our efforts to ship all orders as fast as possible,
but you may experience an additional 1-2 day delay before your order ships.
This may also happen if you change your order during processing.
View Shipping Times
It's important to know that due to state and local laws, there are certain restrictions for various products.
It's up to you to research and comply with the laws in your state, county, and city.
If you live in a state or city where air guns are treated as firearms you may be able to take advantage of our FFL special program.
U.S. federal law requires that all airsoft guns are sold with a 1/4-inch blaze orange muzzle
or an orange flash hider to avoid the guns being mistaken for firearms.
View Shipping Restrictions
Get the most out of your equipment when you work with the expert technicians at Pyramyd AIR. With over 25 years of combined experience, we offer a range of comprehensive in-house services tailored to kickstart your next adventure.
If you're picking up a new air gun, our team can test and tune the equipment before it leaves the warehouse. We can even set up an optic or other equipment so you can get out shooting without the hassle. For bowhunters, our certified master bow technicians provide services such as assembly, optics zeroing, and full equipment setup, which can maximize the potential of your purchase.
By leveraging our expertise and precision, we ensure that your equipment is finely tuned to meet your specific needs and get you ready for your outdoor pursuits. So look out for our services when shopping for something new, and let our experts help you get the most from your outdoor adventures.
View Service Info
Shop and purchase with confidence knowing that all of our air guns (except airsoft) are protected
by a minimum 1-year manufacturer's warranty from the date of purchase unless otherwise noted on the product page.
A warranty is provided by each manufacturer to ensure that your product is free of defect in both materials and workmanship.
View Warranty Details
Didn't get what you wanted or have a problem? We understand that sometimes things aren't right and our team is serious about resolving these issues quickly. We can often help you fix small to medium issues over the phone or email.
If you need to return an item please read our return policy.
Learn About Returns
Get FREE shipping on qualifying orders! Any order $150+ with a shipping address in the contiguous US will receive the option for free ground shipping on items sold & shipped by Pyramyd AIR during checkout. Certain restrictions apply.
Free shipping may not be combined with a coupon unless stated otherwise.
View Shipping Info
Want More?
Join Our Email List for News and Deals!
Join the Pyramyd AIR mailing list: Our e-mails are filled with new products, deals, sneak peeks, tips and tricks, contests and more - sign up today!
Text JOIN to 91256 and get $10 OFF Your Next $50+ Order!
* By providing your number above, you agree to receive recurring autodialed marketing text msgs (e.g. cart reminders) to the mobile number used at opt-in from Pyramyd AIR on 91256. Reply with birthday MM/DD/YYYY to verify legal age of 18+ in order to receive texts. Consent is not a condition of purchase. Msg frequency may vary. Msg & data rates may apply. Reply HELP for help and STOP to cancel. See Terms and Conditions & Privacy Policy.
By rick
1.0 1.0
1.0 1.0
Nothing
Things I would have changed:Smaller size so it will fit in .177 bore
What others should know:May work with .20 bore, but I could not even get it started into my .177 with a patch in place. Cutting the patches to a smaller size had no effect. One size does not always fit all.