Remington Auto-Reset Knockdown Target, Crow Reviews

This is a great item it's close to the ground if that's where you place it.

Maybe add more stickers to enhance the image

I think it's a great item for the money and I'll probably be back for another one.

Nice size ! looks good ! Worked pretty well unless you have it stuck in the ground at an angle. I Did like the attached target area reducers.

Heavier one's to take on the larger caliber air rifles! touch-up pen ! Yellow and black. Reset target was shiny metal when we got done shooting at this one !

Put in the ground straight up & not at an angle. You may have to clear the grass from around the reset target if you put it in a grassy spot! Sgrunt PCP owner.

Cheap!

Would not have ordered had I known about poor quality control. Not worth the hassle to return. Rusty mechanism. Unusable until I spent an hour cleaning and lubricating with WD-40. Pyramid gave me a 50% refund.

Do not purchase.

It's easy and fast to set up. Reasonably priced. Sturdy.

Nothing.

Takes a licking, and keeps on ticking.

Not much. Had to repaint after hundreds of shots, but that's wear and tear in my book.

Attached mine to a longer stake to simulate a crow sitting on a branch and worked great.

Fun target, I have it set up at 45 yards for my .22 cal rifle with the 1" ring. It is tough enough to take this punishment and is holding up well. Going to reset it farther away soon.

If only it could repaint itself, would be everlasting.

Very satisfied with this target. Robust, works as advertised...smallest apeture is VERY humbling. Used .177 and .22 on it, no problems.

Nothing comes to mind. Maybe make a left-facing one, so you can pair them up.

It's a good metal target, so near-misses will give a bit of a clang. Nothing real noisy, but something to consider if you have excitable neighbors.

Excellent idea, the product just doesn't meet the specifications.

The specifications need to be adjusted [lowered] for use with .22 cal pellets. For example, I'm using this with a pellet rifle that shoots between 750fps and 800fps, at a distance of 35 yards (which is within the recommended limitations). After about 10 hits, the 1 inch circle has become warped and bent. The steel for the 1 inch circle and 1/2 inch circle should be thicker/stronger.

Use this with lower powered air guns. It is a fun target if used this way.

Well made product from remington glad to see them back in the air gun seen

Nothing best traget ive ever owned

If ur bored at cans and paper targets like i am get one of these youll love it if your a hunter you will love it even more great for field pactace

Solidly built. I first used targets like this when shooting in England. Great for practicing HFT. I like the adjustable size of the target hole.

nothing.

These are tough but are best used with lower powered airgun in the 15 to 55 yard range. In the UK the normal gun is 12 FPE or less which these would hold up to well. In the states we have access to some high FPE guns that might be a bit too much for repeated use on these or should be used at longer ranges.

Seems to be durable and priced well.

Sometimes it does not reset correctly. I am sure it can be tweaked a little. I did add a couple reducers to the front for 3/8 and 1/4 inch options.

I also placed a dot or two on the large areas of the face plate to allow me to quickly check for POI changes.

See my review on the hog target.... BU6 THESE TARGETS!

built solid. I use a gun that's rated quite a bit higher than the recommended max, doesn't hurt but sometimes the paddle bounces back up when being hit that hard.

its too low. a longer steak or an extender would be nice. if you put it in a grassy area its hard to see the reset paddle.

I had to tighten the nut on the back for the reducers

Made very well. Comes fully assembled. Fun!!

Nothing

Just tighten the nut holding the reducers a bit and it works great!

By far the best metal targets I have found. No strings needed for resetting or limiting the range at wich I shoot them. And the adjustable aperture keeps me working on my shooting skills and wanting to improve.

Nothing

Get a few of these, especially if you have the room to set them up.

Sturdy and gets the job done with no strings attached. lol. Works great with my sub 12 ft pound AA FTP 900 out to 50 yards

taller spike to raise reset disc above grass on longer shots. larger foot peg for esier set up in tough dirt. wingnut for kill zone reducers so you dont need wrench in field to tighten and also some sort of tooth system to help hold reducers center.

get some yellow spray pint for the target paddles they have a shiny metal after a few shots making kill zone hard to see if its up. My sub 12 air rifle struggles to properly reset target out past 50 Yards but kill zone still works out to 90+ Yards. I just use my 22 mrod to reset it. Set up takes no time and no more strings getting tangled in bag and holding up the range. set, shoot, reset, pull, and go home that easy. ONLY Problem with this target is you go through twice as many pellets having to shoot the reset. But hay more trigger time. am i right? Also reducers will loosen and move if you hit the body of target just keep some pliers or box wrench in gun bag easy fix. pics and video soon to follow...

Very durable and well made. Easy setup and stays in place. Reset feature works excellent. Hit the center it falls away, then hit disc at bottom and it resets the yellow disc behind the target hole. Have been using it at 50 yds with the 1/2" entry hole and is a lot of fun to use.

Think the manufacturer got this one just right.

You can tighten up the changeable target hole plates, (kill zone reducers), with the provided nylock nut, so that when hitting off to side they will not shift and block the hole off.

Very durable and well made. Easy setup and stays in place. Reset feature works excellent. Hit the center it falls away, then hit disc at bottom and it resets the yellow disc behind the target hole. Have been using it at 50 yds with the 1/2" entry hole and is a lot of fun to use.

Think the manufacturer got this one just right.

You can tighten up the changeable target hole plates with the provided nylock nut, so that when hitting off to side they will not shift and block the hole off.

Good construction. It should hold up well.

A longer base would be nice