Roll over image to zoom in
1-year limited warranty
List Price $44.95 Save $2.00 (4%)
Only 5 left in stock
2X Buy and Earn 86 Bullseye Bucks!
Create an online review and share your thoughts with other customers
Things I liked: If you have trouble keeping your scope on your springer this should be the trick!
Things I would have changed: It needs to be a little longer.
What others should know: It works good.
Things I liked: Appears high grade Aluminum base with steel alloy fasteners; made in USA; Upon proper installation with "appropriate" torque on the fasteners this is a solid base adapter even without the stop pins*** Looks great and adds to inherent accuracy of my airguns; 50 yd kill zone no problem;
Things I would have changed: Could be 15-25 mm longer for added adjustability at same price points; silver finish option at PA;
What others should know: Used for my HW97 dovetails; I torqued fasteners on by "feel" with a T-handle tool; MUST tighten the bolts Evenly for best application so as NOT to strip the base; Used a "touch" of Moly grease on bolt threads to ease the torquing "systematic process";
Things I liked: extremely solid and well built, once it's clamped on tight, its not going anywhere! Also has lots of room for mounting accessories, i have a bipod and a laser/flashlight combo on mine.
Things I would have changed: it's not cheap, but it is worth it!
What others should know: if you need an adapter, this is definitely a good choice. Looks like it was made specifically for my Condor.
Does this fit benjamin marauder pistol?
My 30mm scope requires high rings, if I install the Weaver Adapter will the added height of the adapter mean I should lower the ring height to a medium? What is the proper standard measurement for high and medium, for example 0.974 or 0.979?
Will fit on airforce airguns
Yes , also UTG and airforce makes these.