Call 888-262-4867 toll-free and we'll answer your questions. Hassle-free online buying. Order by noon Eastern & we ship the same day (weekends & holidays excluded). Some orders excluded.
So, are you looking for a fresh take on airguns?
Some new information, perhaps?
Check out our daily report!
Monday thru Friday find new topics about air guns, BB guns and airsoft guns. Ask your questions by clicking on the comments link at the bottom of each post.
$25 eBillme Rebate! Receive $25 by mail on orders of $100 and over when you checkout with eBillme. Valid for first use of eBillme only. Offer extended to March 31, 2010.
Download the rebate form here.
This item doesn't qualify for Same Day Shipping Exclusions include but are not limited to international shipments, haz-mat products, special order items, orders with out-of-stock items, orders needing customer verification for processing, orders for technical inspection or product installation.
By monkeyboy1900 from USA on 2010-01-23 19:44:16 - See all my reviewsAdd comment to this review
Things I liked:sorry to say nothing.. Things I would have changed:ok well either make tougher bolts or make the bolt holes lower so it can get on tight.. also maybe some groves inside so it will not slip?.. maybe make the bottom a little longer so it will sit on the metal on the bottom so it will not move so much.. What
... Read MoreThings I liked:sorry to say nothing.. Things I would have changed:ok well either make tougher bolts or make the bolt holes lower so it can get on tight.. also maybe some groves inside so it will not slip?.. maybe make the bottom a little longer so it will sit on the metal on the bottom so it will not move so much.. What others should know:well the first off the bolt broke when i tried to tighten it up so after an hour of looking for a matching bolts i found in my old tool box i still had the same problem of it moving.. bugged by this and after a few nights rest.. i tried something.. which worked.. shocked and happy with the out come, i will share this with everyone.. ok i took pieces of electric tape..(cause of color black) i slide it between the barrel and the pump pipe i guess its called..then keep layering it up to 6 strips ontop of each other.. and i placed the mounts on top and pushed down and tightened and i was happy it would not move.. for it rested on the tape ( remember what you do to one side do to the other to keep it on even as in taping part if you try this)
By Jay from USA on 2010-01-23 16:58:08 - See all my reviewsAdd comment to this review
Things I liked:Basically the design is sound, and worth the money depending on what weapon they are installed and if you think you will spend a lot more money on modifying your weapons. Things I would have changed:I found the allen head screws a bit cheap and the wench to screw fit marginal. If you are a kid without much money go
... Read MoreThings I liked:Basically the design is sound, and worth the money depending on what weapon they are installed and if you think you will spend a lot more money on modifying your weapons. Things I would have changed:I found the allen head screws a bit cheap and the wench to screw fit marginal. If you are a kid without much money go for it. Speaking for my 1377, if you can afford to add a breech than do that and forget these mounts. $10 or $30, what can you afford. What others should know:I bought these for a stock Crosman 1377 pistol. The problem I discovered was that the 1377 barrel is not fastened at the breech end. It is just held in place by the plastic breech (but no screw), breech to barrel grommet and at the muzzle by the barrel band. Once I put these mounts on the barrel and then added a red dot scope I saw that there was a lot of rotational flex in the barrel. As long as I was careful and didn't bump the sight every thing was ok.
I decided to modify the 1377 by adding the Crosman steel breech. It has the 3/8" groove for mounting sights so then I didn't need the 459MTs. I sold them after 2 weeks on one of the airgun forums,
By JohnnySuperDad from USA on 2009-12-22 15:19:41 - See all my reviewsAdd comment to this review
Things I liked:Easy Installation, price. Things I would have changed:Two lock down screws instead of just one. What others should know:I mounted these on a Crosman 2240, and they worked great. Secure enough to hold a light holo-sight also from Crosman.
