Daisy Match Grade Avanti Precision Diopter Sight

Quality for the money. It works well on my trailscout.

Nothing.

Nope.

Great fit onto my HW30S. Combined with the standard Weihrauch globe front sight I am shooting 10mm groups at 15 metres. Highly recommend :)

Some torque setting information for the dovetail clamp would be handy.

If you have a Weihrauch HW30S I would highly recommend this product.

The rubber eye piece is a great addition. The sight that came with my Daisy Avanti 499B was more than adequate but I always have to have the upgrade.

The screw located on the top of the 499B that helps secure the wood stock in place prevents this sight from attaching to the rail. For me it was no big deal to just drill a 1/4 inch hole on the underside of the sight but i could see why it would deter someone from using it. The sight should come ready to just screw right on with no modifications.

This sight is a lot heavier than the one that comes with the Avanti 499B.

Mounts easily and is well made from metal and polymer. Positive feeling "clicks" and allows for fine adjustment to really pin point settings.

Maybe offer a set of screw-in peep sight disks with various sized openings.

I mounted this on a Daisy / Avanti 853 10 meter rifle and it works great.
Easy to mount at the correct eye relief for me and remains solidly in place.
W&E knobs easy to operate with firm pressure and everything "stays put".

It was easy to install on the grooved receiver of my Daisey Powerline 953 rifle. Using a peep sight like this is so easy to get the sight on target. Never miss at 10 meters. All you do is look thru the rear sight at the front sight. And you can't miss as long as you get the sight lined up wich id very easy to do.

Not a thing.

I know its a Daisy, but I use this on the Crosman CH2000 and it is perfect. Clears the charging handle just fine. Should also work on theCH2009.

No complaints. There is a 3 or 4 click hysteresis, but once you know this, you learn to work with it easy.

Cheap, works, easy mounting/dismount with a coin.

I have an older sight, from 2012 on my Crosman Challenger. It has a metal locking knob, and new ones have a plastic one that might strip out.

This sight is well built, but when it gets old it tends to jump around even on my PCP challenger. Although still accurate enough for me to win the American Legion national sporter championship with it, so I guess I can't complain.

Also, old ones have the rubber eye cup. New Crosman Challengers don't have the eye cup.

I like the product. adjust very well

does work lose so you need to keep checking the nut that it is tight.

I use it to check scopes to see if it's the gun or the scope that is breaking down. if the group doesn't shift shooting with this then its the scope.

Vary easy to mount and sight in. Good buy for the price.

Can't think of any thing.

Only took eight shoots to sight in at ten meters.

This fits on the 3/8 inch scope base. I believe it should work on a numer of 22 rifles as well. It has a very small peep and so it can be used by someone with less than perfect vision. It makes my Diana pellet rifle the target gun it was originally meant to be.

It could use a little more adjustment for windage. I had to shim mine in order to get it in adjustment. But now it works great. Just a little over dime size groups and 25 yards.