Gamo 1" Rings, High, 3/8" & 11mm Dovetail, See-Thru

NOTHING !!!

THICKNESS on the caps!!!

you can suck the screws through the caps with the wrench they ship with it !!! CHEESY!!! CHEESY !!! CHEESY !!!

works great

nothing

very good product

Easy assembly,

Sturdy and good quality.

The design description need to clarify that these rings will only allow you to view your iron sights if the scope is not flared-out or widened on ends compared to the center portion of the scope. My Gamo Whisper Pro came with a nice scope that's much wider on the ends with the lenses. This obscures the peep hope area of the rings and makes these mounts completely useless. I returned mine. If the mount rings were are a bit taller, then you'd be able to see thru the hole to view the iron sights. I wanted the ability to choose to use my scope or the iron sights depending on my target and these rings won't give that choice if your scope is wider on the ends.

I called and was offered a refund so that was really nice. I also order led a sling and a pellet loader and they were both great.

The rings I received don't go with picture they have 4 screws on the ring and 2 on the mount. I only needed light duty rings for a co2 rifle these could be used on a medium to low power spring gun.

Nothing

The price and they work ok for 10 bucks, but they are not what is in the picture. The straps are four screws not two like in the picture. The tape does come off and sticks too your optic over time.

Make them look like the picture. The straps are four screws not two like in the picture.

Does not look like the picture. The straps are four screws not two like in the picture. The tape does come off and sticks too your optic over time.

These fit my Dovetail mount base and are just the right height to allow vision to my conventional sights. Their Matte Black finish also matches my scope and rifle.

Maybe add 3/8's inch of Vertical see through area.

Exactly what you get. Higher rings to put larger scopes on rifles.

See through "option" really not of any use. Should leave it out.

Picture is a little off. The set of rings i received had 2 screws that attached rings to rifle and 4 screws to secure the scope.

it works good.

Great fit and finish, sturdy for single screw mounts, gripping material in base and cap helps lock things nicely together without biting into scope tube. Using these with a small Bushnell red dot it even re-zeros perfectly when I remount it.

The bottom of the see through opening isn't low enough for my situation as I've kept my open sights very close to the bore. I consider this to be my problem not a design problem, however if it happened to me it could happen to others so perhaps the manufacturer could lower it a little?? I will be milling mine down a bit.

I chose these for the large see through window and ordered them in high mounts to maximize this window and allow me to use my fiber optic sights with a wide field of view for hunting. While I normally don't like high mounts they work well for me on my air pistol.