Call 888-262-4867 toll-free and we'll answer your questions. Hassle-free online buying. Order by noon Eastern & we ship the same day (weekends & holidays excluded). Some orders excluded.
So, are you looking for a fresh take on airguns?
Some new information, perhaps?
Check out our daily report!
Monday thru Friday find new topics about air guns, BB guns and airsoft guns. Ask your questions by clicking on the comments link at the bottom of each post.
$25 eBillme Rebate! Receive $25 by mail on orders of $100 and over when you checkout with eBillme. Valid for first use of eBillme only. Offer valid from October 9, 2009, to January 5, 2010.
Download the rebate form here.
Same day shipping exempt
This item doesn't qualify for Same Day Shipping Exclusions include but are not limited to international shipments, haz-mat products, special order items, orders with out-of-stock items, orders needing customer verification for processing, orders for technical inspection or product installation.
By Robert from USA on 2009-07-31 08:00:51 - See all my reviewsAdd comment to this review
Things I liked:The fit and finish on the sight were fine and it was quickly shipped. Things I would have changed:The discription was not very complete and this sight, although it does fit perfectly on my gun, won't adjust low enough to use it with my front sight. There is no way to lower it further so I will have to build up my front
... Read MoreThings I liked:The fit and finish on the sight were fine and it was quickly shipped. Things I would have changed:The discription was not very complete and this sight, although it does fit perfectly on my gun, won't adjust low enough to use it with my front sight. There is no way to lower it further so I will have to build up my front sight. An extra aperture with a smaller hole would be a nice extra to have. What others should know:Even though this sight may fit your gun, it is not the right sight far all Mendoza rifles, it doesn't have enough downward adjustment and there is no practical way to modify it to work with my gun, a Mendoza/Crosman RM377.
By chili from USA on 2008-12-16 10:32:45 - See all my reviewsAdd comment to this review
Things I liked:Solid. Durable. Aluminum. Things I would have changed:offer different size fittings. What others should know:If you put a small grinding stone on a drill and grind the "roof" out above the 2 pincers that grab the gun you can make it fit most guns. Its easy b/c its aluminum.
By Shooterer from USA on 2008-08-05 13:56:18 - See all my reviewsAdd comment to this review
Things I liked:size,shape, adjustablity Things I would have changed:Apeture size. I drilled my unit out and tapped it to fit my match rifle apetures. What others should know:
By evlwhtguy from USA on 2008-07-25 09:20:26 - See all my reviewsAdd comment to this review
Things I liked:excellent sight but too high for most air rifles. Your front sight would have to be really high for this to work. I have the Winchester 1000K and the front sight is almost 1/2 inch too low. If considering this sight observe the height above the scope groove and make sure your current sight is similarly high. I will probably make
... Read MoreThings I liked:excellent sight but too high for most air rifles. Your front sight would have to be really high for this to work. I have the Winchester 1000K and the front sight is almost 1/2 inch too low. If considering this sight observe the height above the scope groove and make sure your current sight is similarly high. I will probably make myself a new front sight as I have the ability to cast one from aluminum. Things I would have changed: What others should know:
By Matthew from USA on 2008-06-21 21:22:05 - See all my reviewsAdd comment to this review
Things I liked:Fits 11mm dovetail mount. Range of adjustment is excellent. Things I would have changed:Perhaps a couple of alternative aperature sizes would be a nice feature. What others should know:This is a very well made and accurate sight. Can't be beat for the price!
By Robert from USA on 2008-06-14 16:30:59 - See all my reviewsAdd comment to this review
Things I liked:Good solid hardware used for mounting and adjustment screws
permit easy sighting in. Things I would have changed:This sight should have an option for a smaller aperture. I think that would
tighten the groups up considerably. Elevation adjustment was not sufficient for my springer, but It's not a Mendoza. What
... Read MoreThings I liked:Good solid hardware used for mounting and adjustment screws
permit easy sighting in. Things I would have changed:This sight should have an option for a smaller aperture. I think that would
tighten the groups up considerably. Elevation adjustment was not sufficient for my springer, but It's not a Mendoza. What others should know:Compare prices with a William's or Lyman Diopter and you will quickly
see the value in this sight
By Jonathan from USA on 2008-05-09 07:50:07 - See all my reviewsAdd comment to this review
Things I liked:Good price for good quality. This is very well made; the windage and elevation knobs click for adjustment, rather than the awkward screws that the low-priced Williams peep I had used. Things I would have changed:Unfortunately, this sight will not adjust low enough for any of my springers. Due to the design and size
... Read MoreThings I liked:Good price for good quality. This is very well made; the windage and elevation knobs click for adjustment, rather than the awkward screws that the low-priced Williams peep I had used. Things I would have changed:Unfortunately, this sight will not adjust low enough for any of my springers. Due to the design and size of the base, it sits higher than the "target sights" available. The only solution I can think of is to raise the front sight post. What others should know:As someone else mentioned, the base does require a less-common sized allen wrench.
Any rifle with barrel droop may have issues: since the front sight will be low, and since this peep cannot go low enough, shots will be high.
By Lee from USA on 2008-04-22 09:46:08 - See all my reviewsAdd comment to this review
Things I liked:Ease of installation. Crisp click adjustments. Appearance on the gun. It easily aligns with the front sight shroud making it easy to acquire bullseye targets. Things I would have changed:This sight needs directional arrows on the adjustment knobs. What others should know:No allen wrench came with this sight
... Read MoreThings I liked:Ease of installation. Crisp click adjustments. Appearance on the gun. It easily aligns with the front sight shroud making it easy to acquire bullseye targets. Things I would have changed:This sight needs directional arrows on the adjustment knobs. What others should know:No allen wrench came with this sight, and none of mine would fit it. I had to go out a purchase a 9/64 hex wrench.
By Customer from USA on 2008-03-02 07:32:14 - See all my reviewsAdd comment to this review
Things I liked:For what you pay, what you GET is phenomenal. Built solid, nicely finished, well-thought design. It's strong and stable when installed, and it even looks cool. Things I would have changed:The photo of the product doesn't show it, but see that hole that's right next to (and slightly left of) the windage adjustment knob?
... Read MoreThings I liked:For what you pay, what you GET is phenomenal. Built solid, nicely finished, well-thought design. It's strong and stable when installed, and it even looks cool. Things I would have changed:The photo of the product doesn't show it, but see that hole that's right next to (and slightly left of) the windage adjustment knob? It's the location for a very long stabilizer screw which, unless your sight is adjusted almost all the way up, sticks out like a periscope and compromises the appearance significantly. I would have added at least one other stabilizer screw that's about half the length, and I would have added at least one additional aperture that's smaller than the one it presently comes with. What others should know:Other than that, you cannot beat this peep sight for the money...or even twice the money.
By slowfire741 from USA on 2008-01-14 11:19:11 - See all my reviewsAdd comment to this review
Things I liked:the target knobs, micro click adjustments. Full equal of the williams sights for half the money. Things I would have changed:only deepen the mounting groove so it can fit more guns. What others should know:Installed on a cummings cal 177 now shooting 2in groups at 30 yrd 716fps what more could you ask
... Read MoreThings I liked:the target knobs, micro click adjustments. Full equal of the williams sights for half the money. Things I would have changed:only deepen the mounting groove so it can fit more guns. What others should know:Installed on a cummings cal 177 now shooting 2in groups at 30 yrd 716fps what more could you ask of a $30.00 beater air rifle. Ill be mounting one on my beeman 1100 s too replace 3x9 scope and laser im currently using. you cant imagine how good this sight is untill you have tried it!!!
By Vincent from USA on 2007-10-15 16:43:38 - See all my reviewsAdd comment to this review
Things I liked:Solid construction, no play, firm detents. Things I would have changed:Needs clearancing to clear some receiver tubes What others should know:The sight frequently doesn't work with factory front sights - it won't go low enough. That issue aside - a wonderful sight to use.
By Customer from USA on 2007-10-12 11:06:48 - See all my reviewsAdd comment to this review
Things I liked:They are well made out of good materials.
I bought several on sale. I wish I'd bought twice as many!
I intend to install some of these on rimfire guns, too. They will fit wider or more narrow grooves by using longer locking screws or by removing some of the metal where the two-piece bases meet. Things I would
... Read MoreThings I liked:They are well made out of good materials.
I bought several on sale. I wish I'd bought twice as many!
I intend to install some of these on rimfire guns, too. They will fit wider or more narrow grooves by using longer locking screws or by removing some of the metal where the two-piece bases meet. Things I would have changed:I would like a larger area cut away from the sight base above and between the dovetails to fit guns with high, rounded receivers. I don't believe that would impair the ruggedness of this sight and it would increase the number of guns it would fit. What others should know:The first one out of the package I screwed ont o a .177 Gamo Hunter 220. Almost fully depressed, it is the perfect height to match the optic fiber front sight for a 50 foot point of aim. This makes it just right for a light springer. It has not loosened after enough shots that I now expect it to stay where it is.
By Gregory from USA on 2007-09-29 21:30:13 - See all my reviewsAdd comment to this review
Things I liked:Very well made. Things I would have changed:Aperture is huge, .125. Something smaller would be nice. What others should know:Sits high. Will probably need a taller front post.
