3-year limited warranty
List Price $139.99 Save $10.00 (7%)
Earn 130 Bullseye Bucks
other products by Shooting Chrony
Create an online review and share your thoughts with other customers
Things I liked: The chronograph is very easy to setup and use. All you need to make it functional is a single 9v battery. The guide rods and diffusers are easy to put together and into the chronograph.
Things I would have changed: Make the fps/mps show to the same placement, instead of tenths and hundredths. Would also suggest putting a cord cover over the wire between the sensors so it is not easy to close it in the case when you fold it up, not a huge deal but a simple detail that would make it a little nicer.
What others should know: One thing to note is that the fps and average are shown down to the tenths place but when you pull up extreme spread and deviation it shows the numbers down to the hundredths place so if you re-run the fps through another ballistics program you will get different numbers for extreme spread and deviation. The diffusers snap/click together or apart fairly hard and at times so it feels like the little tabs might eventually wear off or break.
Things I liked: Easy to set up and use, fairly intuitive. Shot string data is useful for gauging consistency. Works well with both .22 and .177 pellets.
Things I would have changed: Design the enclosure so that all the rods and screens will store in side the enclosure when folded. Nice folding package, but you still have to tote around a cardboard box to carry the accessories. This makes no sense. Also, make the screens out of a more flexible and durable material.
What others should know: Sky screens appear to be made of too hard and brittle a plastic. After only two uses, the flexing is starting to stress the joints where the rods connect.
Things I liked: Easy to set up and use. Easy to read numbers.
Things I would have changed: Maybe add a padded carry case.
What others should know: It took awhile to get consistent readings indoors. Here's why. This chrony does not like L E D or fluorescent indoor lighting. I put up a shielded clamp work light with a daylight color incandescent bulb. Now have absolutely no error codes and good readings.
Is there any way to protect the wire that runs between the sensors over the top edge of the box? Looks like a serious short coming if you accidently hit the ribbon cable and damaged it. Is it replaceable via a plug or have to be soldered to make a replacement? TIA for any answers... Wheelchair Bob
Unfortunately it's just something that you need to be careful with
What is the difference between the Alpha and the F1?
The Alpha records up to 32 shots while the F1 does not record at all. You can also see your standard deviation, average velocities, extreme spreads and high and low velocities for a given shot string.
$69.99$59.99 $120.00$89.99 $150.00$109.99 $22.00$13.95 $190.00$139.95 $104.95$99.95 $109.99$99.99 $39.99$34.99 $26.34$21.95 $80.34$66.95 $29.99$24.99 $159.99$149.99 $129.54$107.95 $64.99$59.99 $129.99$119.99 $139.99$129.99 $149.99$139.99