Date: 15/6/2019 21:52
0

Shooting Chrony LED. #110-LED. Customer Reviews - page 1

Average Customer Review

5.0 (3 reviews)
4 star3 star2 star1 star
Pre-order

Out of Stock

Create an online review   and share your thoughts with other customers

The most helpful favorable review

3 of 3 people found the following review helpful:

Overall rating:5.0

Value for money:4.0

By Steve Jaynes from USA on 2012-01-12 19:26:41

Things I liked: I have used them for three separate shooting sessions. The one-piece design is MUCH less fussy to assembly than the 3-piece non-illuminated or the 3-piece incandescent bulb illuminated version. Is clearly more stable and less fragile when installed. The one piece struts are also much easier to install. They seem much less fragile than incandescent lamp model and are much more well balanced hanging down from rather than perched on top of defusers. Makes them seem to weigh less, but I didn't measure. I no longer worry about bumping the assembly and breaking the lamp filament when it's turned on and it is MUCH cooler as you would expect. Other than problems listed below, seem very reliable.

Things I would have changed: Cigarette Lighter adapter and a simple protective case should have been included at the price.

What others should know: Power brick seem to be able to transmit line voltage changes to the LEDs, which causes a front or rear sensor error message to be generated. Every time our washing machine changed cycles, I got an error on the Chrony remote readout and my printer. Printer was using AA batteries and Chrony was using its 9V. Had to be the LEDs as was time perfect with washing machine motor start and stop. Unlike the incandescent lamp models, this version was very sensitive to having fluorescent lights on in the same room, even though they were not directly overhead.

The most helpful critical review

1 of 1 people found the following review helpful:

Overall rating:5.0

Value for money:3.0

By Charles from USA on 2011-05-23 11:07:36

Things I liked: The LED lights are red which reduces glare from my 70 watt light bulbs glowing over a large sheet of white paper! My FPS numbers didn't change either. It works and is consistant.

Things I would have changed: Perhaps a bigger sweet spot for the chrony to measure pellet speed.

Sort by:
  • 5.0 5.0

    4.0 4.0

    By Steve Jaynes from USA on 2012-01-12
    See all my reviews
    Was this review helpful?
    5.03 ratings

    Things I liked: I have used them for three separate shooting sessions. The one-piece design is MUCH less fussy to assembly than the 3-piece non-illuminated or the 3-piece incandescent bulb illuminated version. Is clearly more stable and less fragile when installed. The one piece struts are also much easier to install. They seem much less fragile than incandescent lamp model and are much more well balanced hanging down from rather than perched on top of defusers. Makes them seem to weigh less, but I didn't measure. I no longer worry about bumping the assembly and breaking the lamp filament when it's turned on and it is MUCH cooler as you would expect. Other than problems listed below, seem very reliable.

    Things I would have changed: Cigarette Lighter adapter and a simple protective case should have been included at the price.

    What others should know: Power brick seem to be able to transmit line voltage changes to the LEDs, which causes a front or rear sensor error message to be generated. Every time our washing machine changed cycles, I got an error on the Chrony remote readout and my printer. Printer was using AA batteries and Chrony was using its 9V. Had to be the LEDs as was time perfect with washing machine motor start and stop. Unlike the incandescent lamp models, this version was very sensitive to having fluorescent lights on in the same room, even though they were not directly overhead.

     
  • 5.0 5.0

    3.0 3.0

    By Charles from USA on 2011-05-23
    See all my reviews
    Was this review helpful?
    5.01 rating

    Things I liked: The LED lights are red which reduces glare from my 70 watt light bulbs glowing over a large sheet of white paper! My FPS numbers didn't change either. It works and is consistant.

    Things I would have changed: Perhaps a bigger sweet spot for the chrony to measure pellet speed.

     
  • 5.0 5.0

    5.0 5.0

    By chad from USA on 2011-03-30
    See all my reviews
    Was this review helpful?
    4.03 ratings

    Things I liked: Works every shot same no need to worry about lighting conditions anymore

    Things I would have changed: Nothing

    What others should know: Nice red led

     
Navigation