UTG 1" Max Strength Quick-Detach Reviews

very easy to remove scope on my m-rod i use 2 different scopes on the rifle one sidewinder 6-24 power for target shooting and a vortex 2-7 power for hunting very convenient

nothing

try these scope mounts i bet you will like them

Quick release function works smoothly and holds tight.

Better price maybe?

If you don't want to leave your scope on your lead launcher, these are just the ticket for fast easy removal.

Great product

They tighten and loosen nicely by hand and return to zero.

Needing a set of quick detach rings to finish a carbine project with a forward mount scout type scope (Marlin 444 lever gun), I decided to try these rings to see if they would hold up on a hard kicking rifle like this. I was pleasantly surprised to find they worked just as well as the Talley and Leupold rings I have on other similar rifles. And at a much lower price. Easy to attach and remove and returns to zero reliably. Well pleased with this product.

Nothing, great looks and quality, the finish was immaculate.

Should work on any airgun if it holds up to a .444 Marlin.

These are machined very well. The quick release levers are now a favorite feature for me and I'll never go back to screw tighten.

Nothing.

These new aluminum rings of today are just as good, actually better, than the steel rings of old. They're lighter weight, and just as strong. The notion that steel rings are a must is an outdated way of thinking.

I like how quick I can remove and install my scope. The build up looks amazing and solid. They look a lot more expensive than what they are.

Nothing, like I said before they are solid and once my scope is mounted it stays solidly mounted.

I have read from other reviews that some people had a hard time locking the rings to the rail. It was not the case here. You follow the directions from the manufacturer and you will be fine.

Quick removal and remount of scope. Tight solid lockup.

Nothing

Used these to mount a Bushnell 4-12x40 scope on my new Ruger 10/22 takedown. With the scope mount above the receiver, these med. hgt. mounts set the objective bell as low as possible and just enough clearance for scope cap. Scope center to center of barrel 1.5". Used the allen screw adjustment to adjust for a secure lock. Time will tell if they hold up, retain "0", after repeated attachment and removal of scope to place rifle in the back pack. I will give update after a range visit.

Ideal of quick disconnect mounts.

A smother transition from unlock to lock so I don't have to use a mallet to install them.

Order the mounts with the thumb screw, muck better. UTG are excellent mounts but not their quick disc.

Great value and quality for cost!

I hesitate to call anything perfect. But for what these are and cost they work exactly as needed.

The latch is solid and positive. I was conserned about strength and re tension. No worries!!

They perform as they should.

The price if it were feasible.

They work well, I just wish they were about $5 cheaper.

Quick detach feature, it's very nice if you like to switch between a red dot and a scope or if you want the option of removing the scope before putting your gun away in it's case.

The adjustment system on these rings is not the greatest, you use a provided allen key to adjust a hex bolt for the mount tension. The adjustment is pretty sensitive and takes some trial and error to set, not as easy as other lever lock rings on the market. Also when locking and unlocking there a considerable amount of force needed to operate the lever because of how the cam is machined. Again, no where near as smooth or as easy to operate as other rings on the market for a given tension adjustment. This is a pretty significant flaw for a set of rings that are designed to be easily removed and reinstalled.

Whether you would want these rings depends on what your putting them on, a high end pnumatic, no. Get something of better quality. A bargin basement Co2 rifle or a low powered springer, yes.

Excellent product! Rock solid. Very high quality construction.

Nothing at all.

These scope rings should be your only choice. They are superior. I love them. And remember, they will not fit on 11mm dovetail without an adapter.