Air Venturi carbon fiber tank with high-output regulator.
Use this Air Venturi tank for airguns only. It should not be used for filling paintball guns.
Neck of the carbon fiber tank and high-output regulator.
Roll over image to zoom in
1-year limited warranty
List Price $399.95 Save $50.00 (12%)
as low as $31/month
Earn 350 Bullseye Bucks
This high-pressure tank must be filled through the male quick-disconnect on the neck. Before buying, please contact your local air supplier to see if they can fill this tank. Paintball stores may be able to fill your tank, so you may be able to find a fill source through them.
Fill 'er up! This handy carbon fiber tank is small enough to tote around in the field in a backpack while hunting or eliminating pests. Easily fill your air rifles and pistols with the easy on/off quick-disconnect coupling.
If you shoot field target, this could take the place of a buddy bottle. Since it's filled to a pressure of 4,500 psi, you'll get a lot more refills to your 2,900 psi PCP rifle than you would with a buddy bottle. More refills, less hassles, no pumps, no heavy tanks -- it has everything going for it!
and share your thoughts with other customers
Things I liked: Easy to understand instructions, very detailed information. Super easy to use! I like that it regulates the pressure to 2,900 psi.
Things I would have changed: Offer a cover for the bottle and some sort of cover for the fill nipple that won't get lost
What others should know: Don't keep in direct sunlight in your vehicle. Mine went from 4,000 psi to 4,500 psi in about an hour and a half so be careful and have fun. ; )
Things I liked: The tank is small and light enough to take to the field. I have owned it for 1 1/2 years. The valve has always worked properly with no leakage. The quick disconnect works good.
Things I would have changed: The accuracy of the air pressure gauge is questionable due to it's small face and 1000 psi labels with 500 psi tick marks. A larger more accurate gauge would help. Regulate the pressure to 2900 PSI instead of the 2600 PSI I actually get from the tank. I cascade two 3000 PSI scuba tanks to top off my PCP's around the house so I can get close to the 200 bar fill they want.
What others should know: The air pressure gage exploded last week. I had safety goggles on, but I am lucky I was not looking directly at it. The gage face plate and the scale face blew off and are gone, lost somewhere in my garage! The gauge needle and pressure spiral are still in the gage. The tank was being pressurized by my Shoe Box compressor at about 4200 PSI - 4300 PSI (as best I can tell with the little air gauge). All the air continued to vented out of the tank over about 5 minutes since the pressure hole in the gage is also small. As the warranty period is over I will have to buy another gage That gauge scars me so I will upgrade to a better gage.
Things I liked: Price and pressure regulation when pressurizing gun.
Things I would have changed: Needs protective cover
Show Other Reviews and share your thoughts with other customers
Anyone filling this with a Yong Heng PCP Compressor? If so, will the fill hose on the compressor connect directly to the fill port without an adapter? Is the pressure gauge on the compressor reliable? Did you add an inline gauge or do you pressurize the fill station to check pressure or both?
I OWN A HATSAN AT44 10 LONG QE I WANT TO PUCHASE A CARBON FIBER TANK AND FITTINGS TO ANABLE ME TO FILL MY RIFLE . ANY SUGGESTIONS? P.S. I DO OWN A HATSAN HAND PUMP WITH A PROBE HOSE CONNECTOR IF THAT HELPS?
Hi, I'm interested in buying a Ataman AP16 that has a 4350 PSI fill. If the regulator on this unit can't be changed to suit the fill requirements, how do I get it filled without pumping?
You would need to get a compressor or booster, or a larger tank.
Only 1 left in stock
Only 5 left in stock
Out of Stock
Only 3 left in stock
Out of Stock