1-year limited warranty
List Price $599.99 Save $100.00 (16%)
Bundle & Save $70.00!
Only 4 left in stock
Earn 500 Bullseye Bucks
|Max Velocity||1100 fps|
|Buttplate||Soft rubber recoil pad|
|Suggested for||Small game hunting/plinking|
|Trigger Pull||1.5 lbs|
|Max Shots per Fill||32|
|Fixed/adj. power||Multiple settings|
|Cylinder Size||215 cc|
Create an online review and share your thoughts with other customers
Things I liked: Feela solid good weight accurate and easy to turn the power up on. Definatly replaced my discovery.
Things I would have changed: Better finish on the barrels. Scratches easy when you disconnect the pump and the metal hits.
What others should know: Very accuate and great gun. Absolutely love mine.
Things I liked: my first PCP, and i think i made the right choice. It is more accurate than i am-hopefully with more shooting time, i can get better. when i have it on the bipod and steady, im getting very tiny groups. good looking gun, i opted for the wood over the syn. stock. old school i guess.
Things I would have changed: be nice if it had iron sights or an easy way to mount some.
What others should know: my first one arrived with a broken stock, right behind the trigger the stock was broken in two. no signs of rough handling on any of the boxes. Pyramyd air made it right, no issues with that!
Things I liked: .177- This is my third Marauder and second gen 2. It likes the 10.5 Crosman brown box domes (what doesn't). 10/10 aspirin at 25yds. My factory tune is @ 960fps with 10.5 domes, and 1050 with the 7.9s. Curve is almost perfect with this tune. I may slow it down just it hair to get 50 shots. I get 40-45 shots (3000 psi fill) when the velocity starts to fall off. Shape of the stock is comfortable and not as bulky as the gen 1.
Things I would have changed: Stock finish is not as nice as the gen 1. Mine had a few blemishes that were filled/touched-up with wood filler. Detail on the the fore end of the previous model was nice but is not present on this one. Air reservoir finish is rough and snags my cotton cleaning rag. Build quality not as nice as the 1st gen, sad because it's a really nice design and deserves a quality appearance.
What others should know: UTG 4-16x44 (SCP3-U416AOIEW) scope has 1/4" clearance over barrel shroud with medium rings. All of my Marauders suffer from a moisture issue causing corrosion around the aluminum gauge boss inside the air tube--trapped moisture will ultimately corrode around the o-rings and leak. This is drastically aggravated by use of a manual pump. Marauders are fun to shoot but can get expensive to operate, as PCPs are best paired with a reliable, dry, air source... a good 97 Cu Ft fiber bottle is around $800 fully setup but totally worth if if you have a source for 4k air nearby.
Is there a recommended picatinny or weaver rail where the holes and size line up properly? I'd like to add a red dot.
How does the .25 do at 50, 75, and 100yds.
Using .22 cal and EXACT JUMBO HEAVY 18gr at 2600-2800 PSI is this powerful enough to humanely put down a large feral tom cat (est. 15 pounds)? Never used on anything bigger than rats and squirrels myself want to make sure I can cleanly dispatch first.
To fill your PCP gun:
1.Pick a source of air shown at right
2.If an adapter is needed, one will be shown
3.Add both to your cart to get hooked up
Benjamin Marauder Air Rifle with quick-disconnect connector (1M)
To start over click reset
|Max Velocity||1100 fps|