does not include shipping and tax
1-year limited warranty
List Price $295.00 Save $45.05 (15%)
Want it delivered 12-01-2014?
Order it in the next 11 hr and 18 min and choose Next Day Air Morning at checkout. Details
Average Customer Review5.0 (30 reviews)
Create an online reviewand share your thoughts with other customers
Things I liked:Great fit and function as originaly stated. Wood grips are perfect. Used Tung Oil to protect the wood. Removed both grips and bracket from the right one. Despite oil being dark, it darkened the grips only slightly. Accuracy is a consistant 22-36mm. at 24 ft. with single action, laser and hands rested. I've had several dime size groups only to be ruined by a "flyer". It can happen anywhere from shot 1 to shot 8. Aim aside, anyone getting similer results?
Things I would have changed:Nothing aside from the original comments.
What others should know:Action does get smoother as gun breaks in. Have used Pellgun Oil wherever I could access. Close to 1000 shots thus far. Double action pull is still pretty strong. Watch for "dirt" in Co2 chamber and the magazine load area. A Q-tip works well. I've tried all variations of holds, rests, pellet orientation, pellet seating, and even same skirt diameter. Still, a 22mm. group is my best. A grain scale, calipers and more sorting are the next phase of experimentation, and of course,.....achieving that 100% consistant aim. :)
Things I liked:First airgun from Pyramid. Excellent fit and finish! It's made like a fine machine. I did my homework for about 2 weeks prior to purchase,.. including other guns, comments, manual and accessories. The Walther laser sight, PY-A-1790, is great add on. It fits the gun well and is easy to install and adjust. It puts out a bright red dot that is 1/4" @ 24ft. 2 red LED's at the rear remind you that it is on. The natural wood grips are well done and feel great. The gun will put down a consistant 1 1/4" spread @ 24ft. with open sights and 1" w/laser @ 24ft. Using Crossman Co2 and Bengamin hollow points picked up at the local "Wal-ly World".
Things I would have changed:A adj. rear sight would be nice and "dot" both. ( Umarex needs to do this for an add on ). Since I wear glasses for close up, the sights are a bit fuzzy while the target is clear. After carefull thought, I opted for painting the 3 points with neon green hobby paint and a toothpick. HUGE difference! Maybe finger nail polish would work as well? Go bright. At 24ft. I aim 1 1/2" low on a 3" target with the open sights leveled. The cartridge screw could use heavier knurling as fingers tend to slip over it when it's tight. The front sight is a bit loose as noted from other's comments, but has no impact on function.
What others should know:Gun size is good for my hand,( 8 5/8" spread open ). It comes with 2 mags. and a hex key for the rear sight. Mauual states weight is 2.8#. With Co2, laser and a full mag. the weight increases to 3# 2 1/8oz. but is fine for me. Gun will shoot 8 mags. plus 6-7 from a ninth. Order two 3 packs and your set for a full round of shooting! You can put the grip on first and then pierce the Co2 later if you want. Loaded, Co2 in, all you need to do is pierce, safety off and your shooting! The rear sight dialed in at a half a mm. to the right of center. All initial sightings were done sitting with hands rested to minimize movement and single action to reduce trigger pull on aim. For anyone with glasses and wants to shoot indoors, get the laser and you can ignore the open sights. I had it outside yesterday and while the laser was still there, it was much harder to distinguish. Overall, I am very pleased with the gun. If you appreciate precision and quality, you will not be dissapointed.
Things I liked:built with quality, very accurate, and adjustable rear sight
Things I would have changed:nothing
Model Assistant Beretta 92FS, Nickel air gun