Benefits of the Vortex gas-piston powerplant over a metal mainspring:
Click on the ammo link for recommended pellets & the accessories link for targets & more.
The Quattro trigger is available only on Hatsan-manufactured guns! Adjust the 2-stage trigger to your shooting needs.
The 125TH is ideal for plinking, shooting spinners, popping paper targets and dispatching small rodents at close distances.
Please note: the cocking force for this air rifle is approximately 50 lbs.
|Max Velocity||1250 fps|
|Cocking Effort||50 lbs.|
|Front Sight||Fiber Optic|
|Rear Sight||Fiber Optic|
|Scopeable||Weaver & 11mm dovetails|
|Suggested for||Small game hunting/plinking|
Create an online review and share your thoughts with other customers
Things I liked: Not many.....well, actually, NOTHING!
Things I would have changed: accuracy, overall quality, accuacy.....did I mention accuracy?
What others should know: The first one went back because the action jammed....with a pellet in the chamber! I pushed it out from the muzzle and at least sent back a rifle unloaded, but charged. I couldn't budge the safety, couldn't pull the trigger...nothing. The second one at least fires....it's like a freakin workout at the gym cocking the stupid thing! I hold a couple shots fine (under 1" @ about 25 yds), then the fliers start. 3 and 4 inches off!...all over the place! I tried 3 different pellets of different weights....2 H&N and a Crossman. None are any better than the other. Your results may vary......for your sake I sincerely hope so! Gonna try to pawn it off on a buddy.....I already ordered an RWS to replace it.....NEVER had a better air rifle! I owned 3, and now soon to be 4.
Things I liked: Power. Rugged feel. Thumbhole stock. Trigger.
Things I would have changed: Lose the cheap scope. It immediately diminishes the overall quality impression of this rifle. I wanted to use all the included butt plate shims to extend the pull (I'm 6'2" with long arms) but stock screws were not long enough to allow. I probably could have found longer screws to sub but didn't want to change anything until I knew the gun worked and met my needs (which it does). Thumbhole position works for my grip but..... it is awkward at best or will be impossible for some to disengage or engage the safety from the firing position. I have to disengage the safety BEFORE I take my grip and aim, otherwise (if I forget), I have to release my grip, disengage safety then re-grip, re-aim and fire. I would prefer to disengage the safety after acquiring target, just before pulling the trigger without having to pause, remove my right thumb from the thumbhole while supporting the gun with my left hand, disengage the safety then re-grip, reacquire target and fire.
What others should know: This thing is a beast; heavy and hard to cock, which I expected. Shot 8" high out of the box (open sights) @ 12 yds. Adjusted to zero and now hammering pesky squirrels. 25 cal. is "overkill" for small pests but I wanted power to dispatch larger critters if needed and am confident this provides a humane and effective means of control. Not sure if this gun is quiet since all I hear is the mechanical bang of the gas piston in my right ear when fired. No chrony numbers yet. Using JSB Exact King 25.39g. Very pleased w/ accuracy Did not try other pellets; no need.
Things I liked: Power and accuracy. I really like the thumb hole. It is also not the loud. Cocking is no problem for me due to my years of powerlifting.
Things I would have changed: A better scope.
What others should know: Be sure to clean your barrel. It hits very hard. I feel sorry for the next group of squirrels that come into the neighborhood.
Create an online review and share your thoughts with other customers. Show Other Reviews
Hello friends, I use a Google translator ... I'm interested in two parameters of this rifle (Hatsan 125 TH Vortex .22): 1. Twist Rate, Inches? 2. Right or Left hand twist? Also, because I do not have a chronograph I'm interested in how fast the pellet is at 1.03 grams if you have data for my gun? Your lessons in YouTube are priceless!!! Thanks in advance!
Specs say 36 lb cocking effort. Is this accurate?
Uh the specs say 50lb cocking effort? Thats pretty close.
Can I mount a pya-A-4432 on this rifle
I tried the one piece mount on my 125 sniper would not stay put even bent the scope mount stop so i used the weaver option with badger ordinance high two piece mounts with a Aeon 3x12x50mm scope. Does not move now.
If you buy a Leapers Accushot 1-Pc Mount w/1"... to go with it.
|Max Velocity||1250 fps|